2020 TOYOTA SUPRA instrument cluster

3130
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
SUPRA SAFETY
SWITCHING THE SYSTEM ON/OFF
Switching on automatically:
The system is automatically active after every driving off if the functi\
on was
switched on at the end of the last trip.
Switching on/off manually:
Press button. The menu for the Toyota Supra Safety system is displayed.
When press and hold the switch, all Toyota Supra Safety systems are swit\
ched off.
Refer to the Owner’s Manual for limitations and more details on this system.
DISPLAY IN THE INSTRUMENT CLUSTER
A warning symbol appears in the instrument cluster and in the Head-up Di\
splay (if
equipped), where available, if a collision with a detected vehicle is imminent.
Green indicator: At lane marking was detected on at least one side of the
vehicle and warnings can be issued.
SETTING THE WARNING TIME
SETTING THE FORCE OF THE STEERING WHEEL VIBRATION
SWITCHING STEERING INTERVENTION ON/OFF
Setting the warning time via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Supra Safety”
4) “Lane Departure Warning”
5) Select desired setting:
• “Early”
• “Medium”
• “Reduced”
• “Off”
Setting the force of the steering wheel vibration via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Steering wheel vibration”
4) Select desired setting:
Switching steering intervention on/off via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Supra Safety”
4) “Steering intervention”
Lane Departure Warning with Steering Assist
The lane departure warning alerts when the vehicle is about to run off t\
he road or
exit the lane.
This camera-based system warns starting at a minimum speed.
Warnings are issued by means of a steering wheel vibration.
The severity of the steering wheel vibration can be adjusted.
The system does not provide a warning if the turn signal is set before l\
eaving the
lane.
If in the speed range up to 155 mph/250 km/h a lane marking is crossed, \
the
system intervenes with a brief active steering intervention in addition \
to vibrating.
The system thus helps keep the vehicle in the lane.
The camera must detect the lane markings for the lane departure warning \
to be
active.
Camera

3332
SUPRA SAFETY
Blind spot monitor (if equipped)
Blind spot monitor detects vehicles in the blind spot or vehicles approa\
ching from
behind in the adjacent lane. A warning is issued in various gradations i\
n these
situations.
Two radar sensors in the rear bumper monitor the area behind and next to\
the
vehicle when traveling faster than a minimum speed.
The minimum speed is shown in the menu for the Toyota Supra Safety syste\
ms.
The system indicates whether there are vehicles in the blind spot, arrow\
1, or
approaching from behind in the adjacent lane, arrow 2.
The light in the exterior mirror illuminates.
Before you change lanes after setting the turn signal, the system issues\
a warning
in the situations described above.
The light in the exterior mirror flashes and the steering wheel vibrates\
.
SWITCHING THE SYSTEM ON/OFF
Switching on automatically:
The Blind spot monitor is automatically activated after departure if the\
function was
switched on at the end of the last trip.
Switching on/off manually:
Press button. The menu for the Supra Safety system is displayed.
When press and hold the switch, all Supra Safety systems are switched of\
f.
SETTING THE WARNING TIME
Setting the warning time via Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Supra Safety”
4) “Blind spot monitor”
5) Select desired setting:
SETTING THE FORCE OF THE STEERING WHEEL VIBRATION
Setting the force of the steering wheel vibration via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Steering wheel vibration”
4) Select desired setting:
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
The Automatic high-beams detects other traffic participants and automati\
cally
switches the high beams on or off depending on the traffic situation.
The system responds to light from oncoming traffic and traffic driving a\
head of you,
and to ambient lighting, for instance in towns and cities. The high beam\
s can be
switched on and off manually at any time.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
(2) (1)
(1) Press the button on the light switch element.
(2) Press and hold the button on the turn signal lever.
The headlights are automatically switched between low beams and high bea\
ms.
The Automatic high-beams is deactivated when manually switching the high\
beams
on and off.
Light switch element
The indicator light in the instrument cluster is illuminated when the lo\
w
beams are switched on.
The blue indicator light in the instrument cluster lights up when the sy\
stem
switches on the high beams.
Refer to the Owner’s Manual for limitations and more details on this system.