2020 TOYOTA SUPRA low beam

54
Vehicle Stability Control (VSC)2
Vehicle Stability Control (VSC) OFF2
Brake system1
For details, refer to “Indicators/warning lights,” Section 4-1, 2020 Owner’s Manual.
Electric parking brake1
Airbag system1
Tire Pressure Monitor (TPM)2
Steering system2
Instrument cluster
Anti-lock Braking System (ABS)2
Safety belt reminder1
High beams4
Charging battery warning1
Automatic high-beams3
Low engine oil pressure warning1
Emissions2
Low fuel lever warning2
Parking lights3
Cruise control [green/gray indicator]
Turn signal3
High coolant temprature warning1
Lane departure warning3
Parking sensor [white indicator]5
Low beams3
Dynamic radar cruise control3,5
1 Red lights 2 Yellow lights3 Green lights4 Blue lights5 If equipped
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Indicators
Fuel gauge
Speedometer
Tachometer, Status, Sport mode switchTime
Variable displays, Service requirements, Navigation display*, Selection lists
External temperature
Engine temperature
Vehicle messages, Range and odometer
Transmission display
Variable displays, Speed Limit Info
* If equipped
OVERVIEW

1918
Windshield wipers
Lights & turn signals
Right turn
Light switch element
Left turn
HIGH BEAMS, HEADLIGHT FLASHER
TURN SIGNALS
1 Forward/backward, height, seat tilt
2 Driver’s seat memory
3 Backrest tilt
4 Backrest width
5 Lumbar support
0 Resting position of the wipers
1 Rain sensor
2 Normal wiper speed
3 Fast wiper speed
Switching off:
press the lever down until it reaches its
standard position.
Brief wipe:
press the lever down from the standard
position.
Turn the thumbwheel to adjust.
The light switch element is located next
to the steering wheel.
ELECTRICALLY ADJUSTABLE
SWITCH OFF
ADJUST SENSITIVITY OF THE RAIN SENSOR
Refer to the Owner’s Manual for more information.
Parking lights.
Automatic headlight control.
Low beams.
Right roadside parking light.
Left roadside parking light.
Instrument lighting.
Lights off. Daytime running lights.
Push the lever forward or pull it
backward.
• High beams on, arrow 1. The high
beams light up when the low beams
are switched on.
• High beams off/headlight flasher,
arrow 2.
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Seat adjustments
FEATURES & OPERATIONS
LIGHTS SWITCHES

2726
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Supra Safety
Supra Safety enables central operation of the driver assistance system.
Supra Safety consists of one or more systems that can help mitigate or p\
revent an
imminent collision (depending on how the vehicle is equipped).
• Pre-Collision System with Pedestrian Detection
• Lane Departure Warning with Steering Assist
• Automatic High Beams
• Brake Assist
• Blind Spot Monitor (if equipped)
Some Supra Safety systems are automatically active after every departure\
. Some of
the systems activate according to the last setting.
When press and hold the switch, all Supra Safety systems are switched of\
f.
Refer to the Owner’s Manual for more details and important informatio\
n on
limitations to these systems.
THE LOCATION OF THE SAFETY SYSTEM SWITCH
SWITCHING THE SYSTEM ON/OFF
Supra Safety switch
Orange indicator: Some systems are switched off or currently unavailable\
.
No indicator: All systems are switched off.
Green indicator: All systems are switched on.
The system is designed to help mitigate or prevent accidents involving o\
ther
vehicles, pedestrians and cyclists. If an accident cannot be prevented, \
the system
may help reduce the impact speed. The system sounds a warning in the cit\
y speed
range before an imminent collision and activates brakes independently, i\
f needed.
The system is controlled by the following sensors:
• Camera in the area of the interior mirror
• Radar sensor in the front bumper (if equipped)
Pre-Collision System with Pedestrian
Detection
Radar sensor (if equipped)Camera
Refer to the Owner’s Manual for limitations and more details on this system.
The camera system is designed to help detect a bicyclist in daytime cond\
itions and
a pedestrian in daytime and low-light conditions using the forward-facin\
g camera.
DRIVER ASSIST PACKAGE (IF EQUIPPED)
The Driver Assist package adds additional features including a forward f\
acing
millimeter radar sensor and Full-Speed Dynamic Radar Cruise Control. Thi\
s feature
enhances the speeds with which the Pre-Collision System operates in rega\
rds to
vehicle detection and collision mitigation.
Full-Speed Dynamic Radar Cruise Control:
• Enhances the Pre-Collision System vehicle detection capability, all\
owing it to
provide braking intervention at speeds up to 155 mph.
• Enhances the Pedestrian Detection capability, allowing it to provide bra\
king
intervention at speeds up to 53 mph.
* The Pre-Collision System may only apply a brake pulse above 130 mph.
SUPRA SAFETY

3332
SUPRA SAFETY
Blind spot monitor (if equipped)
Blind spot monitor detects vehicles in the blind spot or vehicles approa\
ching from
behind in the adjacent lane. A warning is issued in various gradations i\
n these
situations.
Two radar sensors in the rear bumper monitor the area behind and next to\
the
vehicle when traveling faster than a minimum speed.
The minimum speed is shown in the menu for the Toyota Supra Safety syste\
ms.
The system indicates whether there are vehicles in the blind spot, arrow\
1, or
approaching from behind in the adjacent lane, arrow 2.
The light in the exterior mirror illuminates.
Before you change lanes after setting the turn signal, the system issues\
a warning
in the situations described above.
The light in the exterior mirror flashes and the steering wheel vibrates\
.
SWITCHING THE SYSTEM ON/OFF
Switching on automatically:
The Blind spot monitor is automatically activated after departure if the\
function was
switched on at the end of the last trip.
Switching on/off manually:
Press button. The menu for the Supra Safety system is displayed.
When press and hold the switch, all Supra Safety systems are switched of\
f.
SETTING THE WARNING TIME
Setting the warning time via Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Supra Safety”
4) “Blind spot monitor”
5) Select desired setting:
SETTING THE FORCE OF THE STEERING WHEEL VIBRATION
Setting the force of the steering wheel vibration via Toyota Supra Command:
1) “My Vehicle”
2) “Vehicle settings”
3) “Steering wheel vibration”
4) Select desired setting:
OVERVIEW
FEATURES & OPERATIONS
SUPRA SAFETY
SAFETY
& EMERGENCY FEATURES
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
The Automatic high-beams detects other traffic participants and automati\
cally
switches the high beams on or off depending on the traffic situation.
The system responds to light from oncoming traffic and traffic driving a\
head of you,
and to ambient lighting, for instance in towns and cities. The high beam\
s can be
switched on and off manually at any time.
Refer to the Toyota Owner’s Manual for additional information on AHB \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.
(2) (1)
(1) Press the button on the light switch element.
(2) Press and hold the button on the turn signal lever.
The headlights are automatically switched between low beams and high bea\
ms.
The Automatic high-beams is deactivated when manually switching the high\
beams
on and off.
Light switch element
The indicator light in the instrument cluster is illuminated when the lo\
w
beams are switched on.
The blue indicator light in the instrument cluster lights up when the sy\
stem
switches on the high beams.
Refer to the Owner’s Manual for limitations and more details on this system.