2020 TOYOTA RAV4 HYBRID brake

32
FEATURES & OPERATIONS
If the sensors detect an obstacle, the buzzer and MID or navigation syst\
em
display informs the driver of the approximate position and distance of t\
he obstacle
CZJMMVNJOBUJOHDPOUJOVPVTMZ GBS
PSCMJOLJOH OFBS
%FQFOEJOHPOZPVS"VEJP
Multimedia system, you can adjust settings.
To turn system ON/OFF:

Press “
/ ” or “ / ” and “” of the meter control switches and select
“
”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%


4FMFDU
and press “”. The system displays when the the system is
operational.
Refer to the Owner’s Manual for limitations and more details.
Refer to all of the section Parking Support Brake functions (static obj\
ects and rear-
crossing vehicles) in the Owner’s Manual for limitations and more de\
tails.
Front
center sensor
Rear
center sensor
Corner sensors
(front)
Corner sensors
(front)
Corner sensors
(rear) Corner sensors
(rear)
Intuitive Parking Assist (if equipped)
The Front and Rear Parking Assist with Automated Braking consists of the\
following
functions that operate when driving at a low speed or backing up, such a\
s when
parking. When the system determines that the possibility of a collision \
with a
detected object is high, a warning operates to urge the driver to take e\
vasive
action. If the system determines that the possibility of a collision wit\
h a detected
object is extremely high, the brakes are automatically applied to help a\
void the
collision or help reduce the impact of the collision.
CHANGE SETTINGS
Use “ / ” or “ / ” and “” of the meter control switches to select “”
and
JOUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%
UPDIBOHFTFUUJOHT5IFTZTUFNXJMM
DPOUJOVFJOUIFMBTUTUBUFJUXBTJO 0/PS0''
XIFOUIFFOHJOFJTTUBSUFEBHBJO
Front and Rear Parking Assist with
Automated Braking
(if equipped)

35
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Radar sensor Camera sensor
Sensors
TSS 2.0 combines an in-vehicle camera mounted in front of the inside rea\
r view
mirror and a radar mounted in the front grille. These sensors support th\
e driver assist
systems.
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian or bicyclist in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance that
this system can provide, do not overly rely on this system. This system \
will not prevent
collisions or lessen collision damage or injury in every situation. Do n\
ot use PCS
instead of normal braking operations under any circumstances. Do not att\
empt to test
the operation of the Pre-Collision System yourself, as the system may no\
t operate or
engage, possibly leading to an accident. In some situations, such as whe\
n driving in
inclement weather such as heavy rain, fog, snow or a sandstorm or while \
driving on a
curve and for a few seconds after driving on a curve, a vehicle or pedes\
trian or bicyclist
may not be detected by the radar and camera sensors, preventing the syst\
em from
operating or engaging properly.
Refer to the Toyota Owner’s Manual for a list of additional situation\
s in which the
system may not operate properly.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a buzzer
will sound and a warning message will be displayed on the Multi-Informat\
ion Display
(MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional braking
force using Brake Assist. This system may prime the brakes and may apply\
greater
braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)

36
TOYOTA SAFETY SENSE™
13&$0--*4*0/4:45&. $0/5*/6&%

Refer to the Toyota Owner’s Manual for additional information on PCS \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it. Pre-Collision Braking
If the driver does not brake in a set time and the system determines tha\
t the possibility
of a frontal collision with a preceding vehicle is extremely high, the s\
ystem may
automatically apply the brakes, reducing speed in order to help the driv\
er reduce the
impact and in certain cases avoid the collision.
Monocular camera sensorMillimeter
wave radar
As part of the Pre-Collision System, this function is also designed to f\
irst provide an
alert and then automatic braking if needed.
Refer to the Toyota Owner’s Manual for additional limitations and inf\
ormation.Under certain conditions, the PCS system included with the TSS 2.0 packa\
ge
may also help to detect a pedestrian or bicyclist in front of your vehic\
le using the
in-vehicle camera and front grille-mounted radar. The in-vehicle camera of PCS
detects a potential pedestrian or bicyclist based on size, profile, and \
motion of
the detected pedestrian or bicyclist. However, a pedestrian or bicyclist\
may not
be detected depending on the conditions, including the surrounding brigh\
tness
and the motion, posture, size, and angle of the potential detected pedes\
trian or
bicyclist, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION

37
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
CHANGING PRE-COLLISION ALERT TIMING
%*4"#-*/(13&$0--*4*0/4:45&. 1$4

Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
Far Middle
(default) Near

1SFTT
“ ” switches and select “”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%


1SFTT “
” switches and select “ PCS” and then press “”. The setting
screen is displayed.

1SFTT “
” switches and select “Sensitivity” and then press “” to select
the desired setting. Each time it is pressed, the response to the PCS al\
ert timing
changes as shown above.

1ress “
” to go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition O\
n.
The system can be disabled/enabled and the alert timing of the system ca\
n be
changed. (Alert timing only, brake operation remains the same).

1SFTT “
” switches and select “”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ .*%


1SFTT “
” switches and select “ PCS” and then press “”.

1SFTT “
” and select “PCS” and then press “” to select the desired setting.

1SFTT “
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON m\
ode.
Refer to the Toyota Owner’s Manual for additional information on PCS \
operation,
settings adjustments, limitations, and precautions before attempting to \
use it.

45
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
TURNING SYSTEM ON/OFF
(1)
Push once: On
Push twice: Off
Full-Speed Range Dynamic Radar Cruise Control
(DRCC)
DRCC helps maintain a pre-set distance to a preceding vehicle when the p\
receding
vehicle is traveling at a lower speed. This mode is always selected firs\
t when the
cruise control button is depressed. Constant speed cruise control mode i\
s also
available. DRCC is designed to function at speeds between approximately \
30 to
110 MPH and is intended for highway use. Full-Speed Range DRCC is design\
ed
to function at speeds between 0 to approximately 110 MPH and is intended\
for
highway use.
Display
Set speed Dynamic Radar Cruise Control
vehicle-to-vehicle distance button
Cruise control
switch
Indicators
Refer to page 47 for switching to Constant Speed (Cruise) Control Mode\
.
ADJUSTING SET SPEED
(3) (2)
Vehicle will cruise at a set speed, decelerate to maintain selected dist\
ance from a
slower vehicle traveling in front and accelerate back up to the selected\
speed if the
vehicle in front changes lanes or speeds up.


1VTIi
” to turn DRCC system ON. The “RADAR READY” and “”
indicator will come on.

 6TFUIFTUFFSJOHXIFFMDPOUSPMTUPJODSFBTFTQFFECZQVTIJOH “+RES” or
decrease the speed by pushing “-SET”. Push and hold to make a large
BEKVTUNFOUPSQVTIFBDIUJNFUPNBLFGJOFBEKVTUNFOUT NQI<LNI>PS
LNI<NQI>JODSFNFOUT


1VTI “Cancel” to cancel the speed control.
Increase speed/Resume
Cancel1
Decrease speed
1 The speed control may also be cancelled by depressing the brake pedal.

53
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Star Safety System™
"/5*-0$,#3",&4:45&. "#4

Toyota’s ABS sensors detect which wheels are locking up and limits wh\
eel lockup
by “pulsing” each wheel’s brakes independently. Pulsing release\
s brake pressure
repeatedly for fractions of a second. This helps the tires attain the tr\
action that
current road conditions will allow, helping you to stay in directional c\
ontrol.
#3",&"44*45 #"

Brake Assist is designed to detect sudden or “panic” braking, and \
then add braking
pressure to help decrease the vehicle’s stopping distance. When there\
’s only a split
second to react, Brake Assist can add additional brake pressure more qui\
ckly than
just the driver alone can.
&-&$530/*$#3",&'03$&%*453*#65*0/ &#%

5PZPUBT"#4UFDIOPMPHZIBT&MFDUSPOJD#SBLFGPSDF%JTUSJCVUJPO &#%
UPIFMQ
maintain control and balance when braking. EBD responds to sudden stops \
by
redistributing brake force to enhance the braking effectiveness of all f\
our wheels.
Your vehicle comes standard with the Star Safety System
TM, which combines Anti-
MPDL#SBLJOH4ZTUFN "#4

#SBLF"TTJTU #"

&MFDUSPOJD#SBLFGPSDF%JTUSJCVUJPO
&#%

4NBSU4UPQ5FDIOPMPHZ 445

7FIJDMF4UBCJMJUZ$POUSPM 74$
BOE5SBDUJPO
$POUSPM 53"$

5HIHUWRWKH2ZQHU

54
Floor mat installation
SAFETY & EMERGENCY FEATURES
There are two types of Toyota floor mats: carpeted and all-weather. Each\
vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep\
the mat in place.
• Install floor mats right side up.
53"$5*0/$0/530- 53"$

VSC helps prevent loss of traction during cornering by reducing engine p\
ower, and
Traction Control helps maintain traction on loose gravel and wet, icy, o\
r uneven
TVSGBDFTCZBQQMZJOHCSBLFGPSDFUPUIFTQJOOJOHXIFFM T

Toyota’s TRAC sensors are activated when one of the drive wheels star\
ts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. \
This
transfers power to the wheels that still have traction to help keep you \
on track.
Always align the C marks