Page 205 of 792

PRIUS PRIME_OM_OM47C77U_(U)
2053. Instrument cluster
3
Instrument cluster
*1: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or turn off. Have the veh icle
inspected by your Toyota dealer.
*2: The light flashes to indicate that the system is operating.
*3: The light comes on when the system is turned off.
Cruise control “SET” indicator P. 409
*1, 3PCS warning light P. 385
LDA indicatorP. 396
Steering control indicatorP. 397
Automatic High Beam indicator P. 355
Heated steering wheel indicator (if equipped) P. 527
“BSM” indicator (if equipped)P. 421
Intuitive parking assist indicator (if equipped) P. 433
*1, 3PKSB OFF indicator (if equipped)P. 444
*1S-APGS indicator (if equipped) P. 459
*1“AIR BAG ON/OFF” indicator (U.S.A.) P. 50
*1“AIR BAG ON/OFF” indicator (Canada)P. 50
IndicatorsPages
Page 207 of 792
PRIUS PRIME_OM_OM47C77U_(U)
2073. Instrument cluster
3
Instrument cluster
■Multi-information display (symbol display*)
*: These symbols are displayed along with a message. Also, the symbol dis-
plays listed here are only an example, and different symbols ma y be dis-
played according to the contents of the multi-information displ ay.
Symbol displayPages
Smart key system P. 336
Brake Override System/Drive-Start Control/
Parking Support Brake function (if equipped) P. 666
LDA (Lane Departure Alert with steering con-
trol) systemP. 399
P. 399
Low engine oil pressure warning
(Canada only) P. 666
Page 219 of 792

PRIUS PRIME_OM_OM47C77U_(U)
2193. Instrument cluster
3
Instrument cluster
*: When there is a warning message that can be displayed, the color of
changes to amber.
Menu iconsContentsPages
Drive information The energy monitor that shows the operation
status of the hybrid system, or other informa-
tion such as electricity consumption and fuel
consumption are displayed. P. 220
Clock setting display The clock settings can be changed. P. 237
Navigation system-linked display (if
equipped)
The information related to the navigation sys-
tem is displayed.
P. 238
Audio system-linked displayThe audio system settings can be changed.P. 238
Air conditioning system settings screen
The air conditioning system settings can be
changed.
P. 239
Driving assist system informationThe information related to driving assist sys-
tems such as the LDA (Lane Departure Alert
with steering control) and dynamic radar
cruise control with full-speed range is dis-
played.
P. 243
Warning message display*
The warning messages are displayed.P. 243
Settings displayThe settings of the vehicle functions, meter
display, etc. can be changed.
P. 244
Page 244 of 792

244
PRIUS PRIME_OM_OM47C77U_(U)
3. Instrument cluster
The operation contents of the driving support systems and settings
related to the com bination meter disp lay can be changed.
Driving support systems such as the PCS (Pre-Collision System) and Blind
Spot Monitor (if equipped) is turned on and off by simply pressing .
Make sure not to cancel the systems accidentally.
■
Setting procedure
Press or of the meter cont rol switches on the steering
wheel and select .
Press or of the meter control switches and select the
item to change, and then press .
If the function is turned on and
off or the sensitivity, etc. is
changed on the setting screen,
the setting is changed each time
the is pressed.
For functions that allow opera-
tion contents, display contents,
etc., of a function to be selected,
the setting screen is displayed.
When the setting screen is displayed, select the setting or
desired value (time, etc.) wit h the meter control switches.
*1, 2
For selectable operation con-
tents and setting values, select
the desired setting or value, and
then press .
To stop the selection, press .
When the setting check screen
is displayed, select proceed or
cancel and press .
*1: Depending on the items, a subsequent setting screen may be dis played
after selecting an item.
*2: For items which set the adjustment level or time, after the it em is set,
the setting screen remains displayed until is pressed.
Settings display
1
2
3
Page 245 of 792
PRIUS PRIME_OM_OM47C77U_(U)
2453. Instrument cluster
3
Instrument cluster
■Settings table
ItemSettingsSetting result
“On” Turns the LDA system steering control
function on and off. ( P. 402)
“Off”
“High”Switches the LDA system lane deviation
sensitivity. (P. 402)
“Standard”
“On”
Turns the PCS (Pre-Collision System) on
and off. ( P. 385)
“Off”
Far
Switches the PCS (Pre-Collision System)
warning timing. ( P. 385)Middle
Near
*“On”Turns the Intuitive parking assist on and off.
(P. 433)
“Off”
*“On”Turns the Parking Support Brake function
on and off. ( P. 444)
“Off”
*“On”Turns the Blind Spot Monitor on and off.
(P. 422)
“Off”
“On”
Turns the LDA system vehicle sway warn-
ing on and off. ( P. 402)
“Off”
“High”
Switches the LDA system vehicle sway
warning sensitivity. ( P. 402)“Standard”
“Low”
Page 255 of 792

PRIUS PRIME_OM_OM47C77U_(U)
2553. Instrument cluster
3
Instrument cluster
■Insert displays of the driving support systems
Insert displays are linked wit h the operation of the following sys-
tems and used to show some of the information shown on the mult i-
information display on the head-up display.
*: If equipped
■
Master warning light insert display
When the master warning light
( P. 665) is illuminated or
flashing, an insert display is
shown on the head-up display
to inform the driver.
When the master warning light
is illuminated or flashing, check
the message displayed on the
multi-information display and
perform the corresponding trou-
bleshooting procedure.
( P. 672)
Insert display
SystemDisplayed information
PCS (Pre-Collision System) ( P. 381)Pre-collision warning
LDA (Lane Departure Alert with steering
control) (P. 393)
Lane departure alert function
display
Hands off steering wheel warn-
ing
Vehicle sway warning function
display
Dynamic radar cruise control with full-
speed range ( P. 403)Approach warning display
Parking Support Brake function*
( P. 4 4 3 )Operation display
(symbol display)
Page 273 of 792
273
PRIUS PRIME_OM_OM47C77U_(U)
4
Operation of
each component
4-1. Key information
Keys .................................. 274
4-2. Opening, closing and locking the doors
Side doors ......................... 279
Back door .......................... 285
Smart key system ............. 290
4-3. Adjusting the seats Front seats ........................ 299
Rear seats......................... 301
Head restraints.................. 303
4-4. Adjusting the steering wheel and mirrors
Steering wheel .................. 306
Inside rear view mirror ...... 308
Outside rear view mirrors ............................. 310
4-5. Opening and closing the windows
Power windows ................. 312
Page 306 of 792
3064-4. Adjusting the steering wheel and mirrors
PRIUS PRIME_OM_OM47C77U_(U)
Steering wheel
Hold the steering wheel and
push the lever down.
Adjust to the ideal position by
moving the steering wheel hori-
zontally and vertically.
After adjustment, pull the lever up
to secure the steering wheel.
To sound the horn, press on or
close to the mark.
Adjustment procedure
IO44PH004
1
IO44PH005
2
Horn