2020 TOYOTA PRIUS stop start

2
OVERVIEWInstrument panel
Steering wheel controls
Vehicle Stability Control (VSC) OFF switch
Intelligent Parking Assist (IPA)
switch
1
Automatic High Beam
(AHB) switch Color Head-up Display
(HUD) switch
1
Instrument panel
light control switch
“ENGINE START STOP”
button
Tilt and telescopic steering
lock release lever (below the
steering wheel)
Audio remote
control switches2
Lane Departure Alert (LDA)
switch
Full-Speed Range Dynamic
Radar Cruise Control
(DRCC)/Cruise control switch
Heated steering wheel switch1
Full-Speed Range Dynamic
Radar Cruise Control
(DRCC) vehicle-to-vehicle
distance button
Telephone
switches
2
Voice command
switch2
“TRIP” switch
Windshield wiper and washer control
Fuel tank door release lever
Meter control switches
Hood lock release lever
Headlight/turn signal/
front fog light
1 control
62443_MY20_Prius_Text.indd 28/22/19 7:34 PM

10
TIPS FOR IMPROVED FUEL ECONOMY
STARTING YOUR VEHICLE
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the
vehicle. To conserve energy, when the brakes are applied the braking force
generates electricity which is then sent to the traction battery. In addition, the
engine shuts off when the vehicle is stopped. The benefits are better fuel economy,
reduced vehicle emissions.
NOTE: Fuel consumption and energy information of the Hybrid System are
shown on the Audio Multimedia System screen or the navigation system (if
equipped).
1. Ensure tire pressures are maintained at levels specified in the Owner’s Manual.
2. When possible, link trips to reduce engine cold starts.
3. Avoid driving at speeds that are higher than necessary, especially on the highway.
4. When possible, avoid sudden stops to maximize regenerative braking energy.
5. Minimize use of the air conditioning.
Hybrid Synergy Drive System
Auto lock/unlock
FEATURES & OPERATIONS
(1) Depress the brake pedal, and “”
will be displayed on the Multi-Information
Display.
(2) Press the “POWER” switch briefly and
firmly
(3) The “READY” light will blink. After
a few seconds, when the light remains
steady and a beep sounds, shift the
gear to the desired position and you may
begin driving.
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-Doors lock when the vehicle speed goes above approximately 12 mph.
Driver’s door linked door unlocking function
-Doors unlock when the driver’s door is opened within 45 seconds after turning the “POWER” switch to OFF.
Refer to the Owner’s Manual for more details.
62443_MY20_Prius_Text.indd 108/22/19 7:34 PM

31
Assist mode will be canceled or stopped in the following cases.
Assist control is canceled when
• The system temperature preservation function operates
• There is a system malfunction
• System determined that the parking environment is not suitable for assist to
continue
When assist control is canceled, firmly grasp the steering wheel, depress the brake
pedal and stop the vehicle.
Start again from the beginning, as the system will already be canceled. When
continuing to park manually, operate the steering wheel as you normally would.
Assist control is stopped when
• The steering wheel is operated
• The vehicle speed exceeds 4 mph (7 km/h) during assist control
• The Front and Rear Parking Assist with Automated Braking** operates
When assist control is stopped, it can be resumed by following the guidance shown
on the screen.
The Intelligent Parking Assist (IPA) system requires driver brake control. Always
look around outside the vehicle and use mirrors to confirm clearance.
* Refer to section S-APGS (Simple Advanced Parking Guidance System) in the
Owner’s Manual for limitations and more details.
** Refer to section PKSB (Parking Support Brake function) in the Owner’s Manual
for limitations and more details.
CANCELING OF STOPPING ASSIST MODE
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
62443_MY20_Prius_Text.indd 318/22/19 7:34 PM

48
SAFETY & EMERGENCY FEATURES
SMART STOP TECHNOLOGY (SST)
Star Safety System™
Smart Stop Technology automatically reduces engine power when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
Refer to the Brake Override System section in the Owner’s Manual for more
information on Smart Stop Technology.
ENHANCED VEHICLE STABILITY CONTROL (VSC)
Enhanced Vehicle Stability Control provides cooperative control of the ABS, TRAC,
VSC and EPS.
Enhanced VSC helps to maintain directional stability when loss of traction occurs
during a turn.
ANTI-LOCK BRAKE SYSTEM (ABS)
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
BRAKE ASSIST (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. EBD responds to sudden stops by
redistributing brake force to enhance the braking effectiveness of all four wheels. Your vehicle comes standard with the Star Safety System
TM, which combines Anti-
lock Braking System (ABS), Brake Assist (BA), Electronic Brake-force Distribution
(EBD), Smart Stop Technology (SST), Traction Control (TRAC) and Vehicle Stability
Control (VSC).
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
62443_MY20_Prius_Text.indd 488/22/19 7:35 PM