2020 TOYOTA HIGHLANDER low beam

2
Steering wheel controls
Automatic High Beam (AHB) switch
Audio control
switches2Audio volume
control switch2
Meter control switchesFull-Speed Range Dynamic Radar
Cruise Control (DRCC) vehicle-to-
vehicle distance buttonFull-Speed Range
DRCC switches
Tilt and telescopic steering
lock release lever
(below the steering wheel)
Headlight/turn signal/front fog light
1 control
Meter/Multi-information display (MID)
Hood lock release lever Fuel tank door release lever
Windshield wiper
de-icer switch
1
Heated steering
wheel switch1
Heated steering
wheel switch1
Automatic High Beam
(AHB) switch
Automatic High Beam
(AHB) switch
Birds Eye View Camera switch
1,2
Power back
door switch1
Power back
door switch1
Voice command switch2
Telephone switch2
Lane Tracing Assist (LTA)/Lane Departure
Alert with Steering Assist (LDA w/SA) switch
OVERVIEW
Instrument panel
63195a_MY20 Highlander.indd 211/18/19 8:12 AM

6
Automatic High Beam (AHB)
indicator
For details, refer to “Indicators and warning lights,” Section 2-1, 2020 Owner’s
Manual.
Front Fog light indicator4
Constant speed cruise control
indicator/Constant speed
cruise control SET indicator
Electric power steering system
warning [red/Yellow]
Downhill Assist Control indicator4
Fuel tank door position
Anti-lock Brake (ABS) System
warning1
Airbag SRS warning1
Air Bag ON/OFF indicator1
Brake system warning1 [Yellow]
High coolant temperature warning
Eco drive mode indicator
Mud & sand mode indicator4
Low engine oil pressure warning
Brake Override System/Drive-Start
Control warning
Charging system warning1
Brake hold operated indicator1,2
Brake hold standby indicator1
Front and Rear Parking Assist
with Automated Braking OFF
indicator
1,2,4,5,6
Brake system warning1
BSM outside rear view mirror
indicator4
Blind Spot Monitor (BSM) OFF
indicator4
Eco Driving indicator1
Driver’s and front passenger’s seat
belt reminder (alarm will sound when
the engine switch is in the ”IGNITION ON”)
Full-Speed Range Dynamic
Radar Cruise Control
indicator/DRCC SET
indicator
Malfunction/Check Engine indicator
1
Intuitive parking assist OFF
indicator1,2,4,5
Headlight low/high beam
indicator
Low fuel level warning1
Low outside temperature indicator
Parking brake warning
1,2
Lane Tracing Assist (LTA)/
Lane Departure Alert (LDA) indicator
[white/green/orange
3]
Pre-Collison System (PCS) warning1,2
OVERVIEW
Indicator symbols
63195a_MY20 Highlander.indd 611/18/19 8:12 AM

21
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Front fog lights come on only when the headlights are on low beam.
1 The right hand signals will flash three times.
2 The left hand signals will flash three times.
Daytime Running Light system (DRL) Automatically turns on under certain
conditions to make vehicle more visible to other drivers. Not for use at night. Automatic light cut off system Lights automatically turn off after 30 second delay,
or when lock switch on remote is pushed after all doors are locked.
Automatic High Beam (AHB) system Automatically switches between high and
low beams as appropriate to enhance vision at night.
Refer to Toyota Safety Sense™ 2.0 (TSS 2.0) in this guide or the Owner’s Manual
for more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to the Owner’s Manual for details.
Low beam
Parking lights
Auto
DRL OFFHigh beam
or
Automatic High Beam*
High beam
flasherHeadlights
Turn
Right turn
Lane change
1
Lane change2
Left turn
Lights & turn signals
HEADLIGHTS
FRONT FOG LIGHTS (IF EQUIPPED)
TURN SIGNALS
63195a_MY20 Highlander.indd 2111/18/19 8:12 AM

42
TOYOTA SAFETY SENSE™
Toyota Safety Sense™ 2.0 (TSS 2.0) is a set of active safety technologies designed
to help mitigate or prevent collisions across a wide range of traffic situations, in
certain conditions. TSS 2.0 is designed to help support the driver’s awareness,
decision making and vehicle operation contributing to a safe driving experience.
Refer to the Owner’s Manual for operation, setting adjustments, limitations and
more details to understand these functions and complete safety precautions. For
more information, please go to http://www.toyota.com/safety-sense
Quick overview-Toyota Safety Sense™ 2.0
Pre-Collision System with Pedestrian Detection (PCS w/PD)
PCS w/PD is designed to provide alert, mitigation, and/or avoidance
support in certain conditions, when the system detects a potential
collision with a preceding vehicle is likely to occur.
The advanced millimeter-wave radar sensor system is designed to work
with the camera sensor to help recognize a preceding pedestrian or
bicyclist, and provide an alert, mitigation and/or avoidance support in
certain conditions.
Lane Departure Alert with Steering Assist (LDA w/SA)
LDA w/SA is designed to provide notification when the system detects
an unintended lane departure.
The Steering Assist function is designed to provide small corrective
steering inputs to the steering wheel for a short period of time to help
keep the vehicle in its lane.
The Sway Warning function is designed to detect vehicle swaying
(based on the vehicle location and steering wheel operation) and alert
the driver with an audio and visual alert, urging them to take a break.
Automatic High Beams (AHB)
AHB is designed to detect the headlights of oncoming vehicles and
the tail lights of preceding vehicles and switch between high beams
and low beams as appropriate.
Road Sign Assist (RSA)
RSA is designed to recognizes specific road signs using the forward
facing camera to provide information to the driver via the display.
Full-Speed Range Dynamic Radar Cruise Control (DRCC)
Full-Speed Range DRCC is designed to help maintain a pre-set
distance to a preceding vehicle when the preceding vehicle is traveling
at a lower speed. The minimum set speed is approximately 20 MPH, but
once activated, the operating speed range is 0-110 MPH.
Lane Tracing Assist (LTA)
LTA contains all the features of LDA described above and additionally
is designed to help keep the vehicle in the center of a lane by assisting
the driver in steering control when using Full-Speed Range DRCC.
63195a_MY20 Highlander.indd 4211/18/19 8:13 AM

57
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of these conditions are met, high beams will be automatically turned on
(after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned on.
• There are few streetlights on the road ahead.
If any of these conditions occur, high beams will be automatically turned off: • Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
AHB is a safety system designed to help drivers see more of what’s ahead at
nighttime while reducing glare for oncoming drivers, AHB uses an in-vehicle
camera to help detect the headlights of oncoming vehicles and tail lights of
preceding vehicles, then automatically switches between high and low beams
as appropriate to provide the most light possible and enhance forward visibility.
By using high beams more frequently, the system may allow earlier detection of
pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
(2) (1)
(1) Press the “
” switch.
(2) Push lever away from you with the headlight switch is in the “
” or “AUTO”
position.
The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB
system off.
The AHB indicator will turn off. To turn switch to “
” position and the manual
high beam indicator “
” turns on.
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
63195a_MY20 Highlander.indd 5711/18/19 8:13 AM