36
FEATURES & OPERATIONSRear view monitor system
(if equipped)
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button and
select “Display”. Select “Camera” to adjust the screen contrast and brightness.
Refer to the Navigation and Multimedia System Owner’s Manual for limitations and
more details on this system.
Refer to section PKSB (Parking Support Brake function) in the Owner’s Manual for
limitations and more details. The Front and Rear Parking Assist with Automated Braking consists of the following
functions that operate when driving at a low speed or backing up, such as when
parking. When the system determines that the possibility of a collision with a
detected object is high, a warning operates to urge the driver to take evasive
action. If the system determines that the possibility of a collision with a detected
object is extremely high, the brakes are automatically applied to help avoid the
collision or help reduce the impact of the collision.
CHANGE SETTINGS
Use “” or “” and “” of the meter control switches to select “” and
“
” in the Multi-Information Display (MID) to change settings. The system will
continue in the last state it was in (ON or OFF) when the engine is started again.
Front and Rear Parking Assist with
Automated Braking
(if equipped)
63195a_MY20 Highlander.indd 3611/18/19 8:13 AM
