2020 TOYOTA COROLLA start stop button

701-4. Theft deterrent system
COROLLA_U
hood, and lock all the doors.
The system will set automati-
cally after 30 seconds.
The indicator light changes from
being on to flashing when the sys-
tem is set.
■Canceling or stopping
Do one of the following to deac-
tivate or stop the alarms:
 Unlock the doors.
 Turn the engine switch to
ACC or ON, or start the
engine. (The alarm will be
deactivated or stopped after a
few seconds.)
■System maintenance
The vehicle has a mainte-
nance-free type alarm system.
■Triggering of the alarm
The alarm may be triggered in the
following situations:
(Stopping the alarm deactivates the
alarm system.)
●A person inside the vehicle opens
a door, the trunk or hood, or
unlocks the vehicle using a door
lock switch or inside lock button.
●The battery is recharged or
replaced when the vehicle is
locked. ( P.518)
■Alarm-operated door lock
In the following cases, depending
on the situation, the door may auto-
matically lock to prevent improper
entry into the vehicle:
●When a person remaining in the
vehicle unlocks the door and the
alarm is activated.
●While the alarm is activated, a
person remaining in the vehicle
unlocks the door.
●When recharging or replacing the
battery
NOTICE
■To ensure the system oper-
ates correctly
Do not modify or remove the sys-
tem. If modified or removed, the
proper operation of the system
cannot be guaranteed.

1133-2. Opening, closing and locking the doors
COROLLA_U
3
Before driving
been used for 5 days or longer.
●If the smart key system has not
been used for 14 days or longer,
the doors cannot be unlocked
from any door except the driver’s
door. In this case, hold the driver’s
door handle, or use the wireless
remote control or mechanical key
to unlock the doors.
■Electronic key battery-saving
function
When battery-saving mode is set,
battery depletion is minimized by
stopping the electronic key from
receiving radio waves.
Press twice while pressing and
holding . Confirm that the elec-
tronic key indicator flashes 4 times.
While the battery-saving mode is
set, the smart key system cannot be
used. To cancel t he function, press
any of the electronic key buttons.
■Conditions affecting operation
The smart key system uses weak
radio waves. In the following situa-
tions, the communication between
the electronic key and the vehicle
may be affected, preventing the
smart key system, wireless remote
control and engine immobilizer sys-
tem from operating properly.
●When the electronic key battery is
depleted
●Near a TV tower, electric power
plant, gas station, radio station,
large display, airport or other facil-
ity that generates strong radio
waves or electrical noise
●When carrying a portable radio,
cellular phone, cordless phone or other wireless communication
device
●When the electronic key is in con-
tact with, or is covered by the fol-
lowing metallic objects
• Cards to which aluminum foil is attached
• Cigarette boxes that have alumi-
num foil inside
• Metallic wallets or bags
•Coins
• Hand warmers made of metal
• Media such as CDs and DVDs
●When other wireless keys (that
emit radio waves) are being used
nearby
●When carrying the electronic key
together with the following devices
that emit radio waves
• Another vehicle’s electronic key or a wireless key that emits radio
waves
• Personal computers or personal digital assistants (PDAs)
• Digital audio players
• Portable game systems
●If window tint with a metallic con-
tent or metallic objects are
attached to the rear window
●When the electronic key is placed
near a battery charger or elec-
tronic devices
●When the vehicle is parked in a
pay parking spot where radio
waves are emitted
If the doors cannot be
locked/unlocked using the smart key
system, lock/unlock the doors by
performing any of the following:
●Bring the electronic key close to
either front door handle and oper-
ate the entry function.
●Operate the wireless remote con-
trol.
If the doors cannot be
locked/unlocked using the above
methods, use the mechanical key.
(  P.513)
If the engine cannot be started using
the smart key system, refer to

1544-2. Driving procedures
COROLLA_U
:While the engine switch is in
ON and the brake pedal
depressed
*, shift the shift lever
while pushing the shift release
button on the shift knob.
:Shift the shift lever while
pushing the shift release button
on the shift knob.
:Shift the shift lever normally.
When shifting the shift lever
between P and D, make sure that
the vehicle is completely stopped
and the brake pedal is depressed.
*: For the vehicle be able to be shifted from P, the brake pedal
must be depressed before the
shift release button is pushed. If
the shift release button is pushed
first, the shift lock will not be
released.
■Shift lock system
The shift lock system is a system to
prevent accidental operation of the
shift lever in starting.
The shift lever can be shifted from P
only when the engine switch is in
ON and the brake pedal is being
depressed.
■If the shift lever cannot be
shifted from P
First, check whether the brake pedal
is being depressed.
If the shift lever cannot be shifted
with your foot on the brake pedal,
there may be a problem with the
shift lock system. Have the vehicle
inspected by your Toyota dealer
immediately.
The following steps may be used as
an emergency measure to ensure
that the shift lever can be shifted.
Releasing the shift lock:
1 Set the parking brake.
2 Turn the engine switch off.
3 Depress the brake pedal.
4 Ply the cover up with a flathead
screwdriver or equivalent tool.
To prevent damaging the cover,
wrap the tip of the flathead
screwdriver with a tape.
5 Press and hold the shift lock
override button and then push
the shift release button on the
shift knob.
The shift lever can be shifted while
Shifting the shift lever

1554-2. Driving procedures
COROLLA_U
4
Driving
the button is pressed.
 P.249
*: If equipped
*: To improve fuel efficiency and
reduce noise, shift the shift lever
to D for normal driving.
■To protect the continuously
variable transmission
If the continuously variable trans-
mission fluid temperature is high,
“Transmission Oil Temp. High Stop
in a Safe Place and See Owner’s
Manual” will be displayed on the
multi-information display and the
vehicle will go into transmission pro-
tection mode automatically. Have
WARNING
■To prevent an accident when
releasing the shift lock
Before pressing the shift lock
override button, make sure to set
the parking brake and depress the
brake pedal.
If the accelerator pedal is acci-
dentally depressed instead of the
brake pedal when the shift lock
override button is pressed and the
shift lever is shifted out of P, the
vehicle may suddenly start, possi-
bly leading to an accident result-
ing in death or serious injury.
Selecting the driving
mode
Continuously variable
transmission (vehi-
cles with paddle shift
switches)
*
Select the shift position
depending on your purpose
and situation.
Shift position purpose
and functions
Shift posi- tionObjective or function
PParking the vehi-
cle/starting the engine
RReversing
N
Neutral
(Condition in which the power is not transmit- ted)
DNormal driving*
M
10-speed sport sequen-tial shiftmatic mode driving ( P.158)

1564-2. Driving procedures
COROLLA_Uthe vehicle inspected by your Toyota
dealer.
■When driving with dynamic
radar cruise control with
full-speed range activated
Even when switching the driving
mode to sport mode with the intent
of enabling engine braking, engine
braking will not occur because
dynamic radar cruise control with
full-speed range will not be can-
celed. ( P.249)
■Restraining sudden start
(Drive-Start Control)
 P. 1 3 6
■G AI-SHIFT
G AI-SHIFT automatically selects a
suitable gear for sporty driving
according to driver’s input and driv-
ing conditions. G AI-SHIFT operates
automatically when the shift lever is
in D and sport mode is selected for
the driving mode. (Selecting normal
mode or shifting the shift lever to the
M position cancels this function.)
■After recharging/reconnecting
the battery
 P. 5 1 8
:While the engine switch is in
ON and the brake pedal
depressed
*, shift the shift lever
while pushing the shift release
button on the shift knob.
:Shift the shift lever while
pushing the shift release button
on the shift knob.
:Shift the shift lever normally.
When shifting the shift lever
between P and D, make sure that
the vehicle is completely stopped
and the brake pedal is depressed.
*: For the vehicle be able to be shifted from P, the brake pedal
must be depressed before the
shift release button is pushed. If
the shift release button is pushed
first, the shift lock will not be
released.
WARNING
■When driving on slippery
road surfaces
Do not accelerate or shift the shift
gears suddenly.
Sudden changes in engine brak-
ing may cause the vehicle to spin
or skid, resulting in an accident.
Shifting the shift lever

4186-4. Other interior features
COROLLA_U
opener motor recognizes the
HomeLink
® signal.
■Enabling 2-way communi-
cation with a garage door
(only available for compati-
ble devices)
When enabled, 2-way communi-
cation allows you to check the
status of the opening and clos-
ing of a garage door through
indicators in your vehicle.
2-way communication is only
available if the garage door
opener motor used is a compati-
ble device. (To check device
compatibility, refer to
www.homelink.com.)
1 Within 5 seconds after pro-
gramming the garage door
opener has been completed,
if the garage door opener
motor is trained to Home-
Link
®, both garage door
operation indicators will flash
rapidly (green) and the light
on the garage door opener
motor will blink twice, indicat-
ing that 2-way communica-
tion is enabled.
If the indicators do not flash, per- form
2 and 3 within the first 10
presses of the HomeLink
® button
after programming has been com-
pleted.
2 Press a programmed Home-
Link
® button to operate a
garage door.
3 Within 1 minute of pressing
the HomeLink
® button, after
the garage door operation
has stopped, press the
“Learn” or “Smart” button on
the garage door opener
motor. Within 5 seconds of
the establishment of 2-way
communication with the
garage door opener, both
garage door operation indica-
tors in the vehicle will flash
rapidly (green) and the light
on the garage door opener
motor will blink twice, indicat-
ing that 2-way communica-
tion is enabled.
■Reprogramming a single
HomeLink
® button
When the following procedure is
performed, buttons which
already have devices registered
to them can be overwritten:
1 With one hand, press and
hold the desired HomeLink
®
button.
2 When the HomeLink
® indica-
tor starts flashing (orange),
continue to hold the Home-
Link
® button and perform
“Programming HomeLink
®” 1

574Alphabetical Index
COROLLA_U
Outside rear view mirrors ..... 125
Rear door child-protectors.... 107
Side doors ............................ 103
Drive distance ........................... 90
Drive information ..................... 90
Drive-start control .................. 136
Driving Break-in tips ......................... 136
Correct driving posture ........... 23
Driving mode select switch... 249
Procedures ........................... 134
Winter drive tips ................... 255
Driving information display ..... 87
Driving range ............................ 88
Driving support system informa- tion display ............................. 89
Dynamic radar cruise control 223 Warning message ................ 231
Dynamic radar cruise control with full-speed range ........... 213Warning message ................ 222
E
Eco Driving Indicator ............... 88
Eco Driving Indicator Light ..... 88
EDR (Event data recorder)......... 8
Elapsed time ............................. 90
Electric Power Steering (EPS) ............................................... 251Warning light ........................ 484
Electronic key ........................... 96 Battery-saving function......... 112
If the electronic key does not operate properly ................. 513
Replacing the battery ........... 458
Emergency flashers ............... 472
Emergency tire puncture repair kit ........................................... 493
Emergency, in case of If a warning buzzer sounds .. 481
If a warning light turns on ..... 481 If a warning message is dis-
played .................................490
If the battery is discharged ...515
If the electronic key does not operate properly .................513
If the engine will not start...... 511
If the vehicle is trapped in rising water...................................474
If you have a flat tire .....493, 503
If you lose your keys.............513
If you think something is wrong ...........................................479
If your vehicle becomes stuck ...........................................521
If your vehicle has to be stopped in an emergency .................472
If your vehicle ne eds to be towed
...........................................475
If your vehicle overheats ......519
Enform App Suite button (Setup screen) ...................................266
Engine ACCESSORY mode .............151
Compartment........................436
Engine switch ...............147, 148
Fuel pump shut off system ...480
Hood .....................................434
How to start the engine 147, 148
Identification number ............525
If the engine will not start...... 511
If your vehicle has to be stopped in an emergency .................472
Ignition switch (engine switch) ...................................147, 148
Overheating ..........................519
Tachometer.......................77, 81
Engine coolant Capacity ...............................528
Checking ..............................440
Preparing and checking before winter ..................................255

576Alphabetical Index
COROLLA_U
General settings ..................... 296 Displaying the general settings screen ................................ 296
General settings screen ....... 296
Glove box ................................ 401
Glove box light ....................... 401
H
Hands-free system ................. 345
Head restraints ....................... 121
Headlights Adaptive Front-lighting System (AFS) .................................. 172
Automatic High Beam system ........................................... 173
Light switch .......................... 170
Headlights/daytime running lightsReplacing light bulbs ............ 465
Heated steering wheel ........... 396
Heaters Automatic air conditioning sys-tem ..................................... 391
Heated steering wheel ......... 396
Manual air conditioning system ........................................... 386
Outside rear view mirrors ... 388, 392
Seat heaters ......................... 396
High mounted stoplight Replacing light bulbs ............ 465
Hill-start assist control .......... 251
HOME button .......................... 270
Home screen ........................... 270
Hood Open .................................... 434
Hooks Coat hooks ........................... 413
Retaining hooks (floor mat) .... 22
Horn ......................................... 123
I
I/M test .....................................431
Identification Engine ..................................525
Vehicle ..................................524
Ignition switch (engine switch) .......................................147, 148Auto power off function .........151
Changing the engine switch modes.................................151
If your vehicle has to be stopped in an emergency .................472
Illuminated entry system .......399
Indicators ..................................74
Info button (Menu screen) .....263
Initial screen............................267 Caution screen .....................267
Restarting the system ...........267
Initialization Items to initialize ...................556
Maintenance .........................428
Power windows ....................127
Tire pressure warning system...........................................450
Inside rear view mirror ...........124
Instrument panel light control79,
84
Interior lights...........................398 Front interior light .................398
Rear interior light ..................398
Wattage ................................533
Internet radio...........................309
iPod/iPhone .............................313
J
Jack Positioning a floor jack .........435
Vehicle-equipped jack ..494, 504
Jack handle .....................494, 504
Jam protection function Moon roof .............................130