2020 SUBARU WRX turn signal

4High Beams:Push the lever forward to change from low beam to high beam. Pull the
lever back to center to return to low beam. If equipped, this also activates the High
Beam Assist (HBA) system.
5Fog Lights:If equipped, rotate the dial to turn on the fog lights.
Illumination Brightness
While the light switch is on, rotating the dial on
the instrument panel upward will make the
illumination brighter. When the dial is fully
rotated upward (dots aligned), the instrument
panel illumination stays at full brightness.
Rotating the dial downward dims the
instrument panel illumination.
For map equipped vehicles this setting also
affects the day/night view and illumination
level.
Daytime Running Lights
The daytime running lights automatically turn on when the engine has started, the parking
brake is fully released, the light switch is in the Off, “AUTO” (if equipped) or “
”
position, and the select lever is not in the “P” position. Always turn on the headlights when
it’s dark outside by rotating the dial to the “
” or “AUTO” position.
TURN SIGNALS
Push slightly up for right lane change or fully
up for right turn signal. Push slightly down for
left lane change or fully down for left turn
signal.
CONTROLS
19

ELECTRONIC PARKING BRAKE (EPB)(if equipped)
To apply the parking brake, pull up the parking
brake switch. The indicator light on the parking
brake switch will illuminate and “PARK” will
appear in the combination meter.
To release the parking brake manually, depress
the brake pedal and push the parking brake
switch down. To automatically release, gently
press the accelerator pedal with the select
lever in the “D” or “R” position. NOTE: All the
doors must be closed and your seatbelt must
be fastened.
Auto Vehicle Hold (AVH) —If Equipped (CVT Models Only)
This function automatically holds your Subaru
in place when at a complete stop, such as a
traffic signal, even after you release the brake
pedal. Press the “AVH” switch on the center
console to turn on the function each time you
start the vehicle. The indicator in the
combination meter will illuminate.
While your Subaru is being held by this
function, the operation indicator in the
combination meter will illuminate. The function
is canceled when you depress the accelerator
pedal or the brake pedal. Press the switch
again to turn it off. The function works with the
select lever in either the “D” or “R” position.
NOTE: You must have your seatbelt fastened
for this function to work.
OPERATING THE VEHICLE
28

N
NEW VEHICLE BREAK-IN .........37
O
OVERHEAD PANEL . . . . ........21
P
POWER EXTERIOR MIRRORS . . . . . . 10
POWER MOONROOF
Opening/Closing the Moonroof . . . . 11
Tilting the Moonroof ..........11
POWER WINDOWS . . . . . . . . . . . . 11
PUSH-BUTTON IGNITION SWITCH . . 23
R
REAR VIEW MIRROR
Auto-dimming Mirror ..........10
HomeLink
®5 Accessory Mirror . . . 10
S
SEATING
Head Restraint Adjustment . . . . . . . 8
Manual Seats . . . . . . . . . . . . . . . 8
Power Driver’s Seat . . . . . . . . . . . 8
Seatbelt Adjuster . . . . .........9
SPARE TIRE AND JACK . .........34
STARTING THE ENGINE
Without Push-button Ignition.....23
With Push-button Ignition.......23
T
TILT AND TELESCOPIC STEERING
COLUMN.................9
TIRE PRESSURE MONITORING SYSTEM
(TPMS)..................37
TOWING YOUR ALL-WHEEL DRIVE
SUBARU . . . . . . . . . . . . ......3
TURNING OFF THE VEHICLE
Without Push-button Ignition . . . . . 29
With Push-button Ignition Switch . . 29
TURN SIGNALS . . . . ..........19
W
WARNING AND INDICATOR LIGHTS . . 22
WINDSHIELD WIPERS..........20
INDEX
39