SEATING
Manual Seats
1Forward/Backward:Pull the lever below the
seat up and slide the seat forward or backward.
Release the lever and make sure the seat is
locked into place.
2Seat Height (Driver’s Seat):Pulling up or
pushing down on the lever will raise or lower the
seat cushion.
3Recline Seatback:Pull the lever up to adjust the seatback to the desired position.
Release the lever and make sure the seat is locked into place.
Power Driver’s Seat(if equipped)
1Forward/Backward and Height:Moving the
switch forward or backward will adjust the seat in
that direction. Pulling up or pushing down on the
front or back of the switch will adjust the angle of
the seat cushion. Pulling up or pushing down the
entire switch will adjust the height of the
seat cushion.
2Recline Seatback:Moving the switch
forward or backward will adjust the angle
of the seatback.
3Lumbar Support (if equipped):Pressing
the front of the switch will increase
support. Pressing the rear of the switch
will decrease support.
4Thigh Extension (if equipped):Pull up
on the lever below the seat cushion to
adjust the length.
GETTING COMFORTABLE
10
Seatbelt Adjuster
Always position the seatbelt adjuster so the shoulder
belt passes over the middle of your shoulder without
touching your neck. Pull the adjuster out and slide it
up or down. Release the adjuster and make sure it is
locked in place.
TILT AND TELESCOPIC STEERING COLUMN
Pull the lever down firmly to unlock, then adjust the
height and lengthwise position of the column. Push
the lever firmly back up to lock the column in place.
GETTING COMFORTABLE
12
