Page 89 of 405

Instruments and warning/control lamps
Explanation of the function buttons Fig. 65
Schematic representation: Overview of the
possibl e function butt
ons on the screenTop part of the screen
Curr ent time
Driving pr
ofile and navigation informa-
tion. If the user has an active route, both
the time and the distance to the destina-
tion are displayed. If there is no active
route, the driving profile is displayed. On
vehicles with no available driving profile,
the current address is displayed whenev-
er there is no active route.
Air conditioning information. In vehicles
with heated steering wheels or wind-
screen heating, the corresponding icon is
A B
C displayed when these functions are ena-
bl
ed. If not, the curr
ent outside tempera-
ture is displayed.
Telephone information. Information re-
garding your mobile device is displayed:
available network signal strength, estab-
lished Bluetooth connection, unanswered
calls, new messages, battery status, etc.
Number of notifications and customi-
zation of the system depending on the
user and connectivity.
Bottom part of the screen Main menu display mode:
D E
F : main menu with the 6 main functions
divided int o 2 scr
eens (3 + 3, customisa-
ble by the user by pressing on the func-
tion).
: main menu in mosaic mode (all func- tions of the Infotainment system)
Direct accesses to the functions of the In-
fotainment system (up to 10 functions, 5 +
5, customisable by the user). By pressing
on the icon, you can select/deselect the
functions in question.
G
87
Page 90 of 405
Operation
Initial configuration wizard Fig. 66
Schematic representation: Initial configu-
r ation wiz
ard The initial configuration wizard will help you
t
o set up your Inf
otainment system the first
time you switch it on.
Every time you switch on the Infotainment
system, the initial setup screen will be dis-
played ››› Fig. 66
if any parameters have not
been set (marked with “ d”) or if the Don't
show again function button has not been
pressed. Function button: Function
Closes the Configuration Wizard. Function button: Function
A Press to set day and time.
B Press to search and store to memory
the radio st
ations that have the best
reception at that moment.
C Press to go to the Online Media set-
tings.
D Press to link your mobile phone to
the Inf
ot
ainment system. Function button: Function
Don
Page 128 of 405
Operation
Turn the control to the corresponding posi-
tion: Turning the knob t
o the desired position,
adjust the mirrors on the driver side (L,
left) and the passenger side (R, right) to
the direction desired.
Depending on the equipment fitted on
the vehicle, the mirrors may be heated
according to the outside temperature.
Folding in mirrors.
Synchronized regulation of the exterior
mirrors
In the infotainment system, using the function
button ! S e t t i n g s ! M i r r o r s a n d
w i p e r s ! M i r r o r s , the exterior rear view
mirrors can be selected to adjust in a
synchronised manner.
Page 161 of 405

Air conditioning
Some functions and buttons, as well as the
air conditioning f or the r
ear seats, are only
available depending on the vehicle equip-
ment.
Sensors fields 1 and
2 The temperature of the right and left sides
can be adjust
ed separ
ately using the adjust-
ers. The selected temperature is shown on
the display of the climate control panel.
To set the Climatronic temperature to +22 °C
(+72 °F), the centre of the touch control must
be pressed briefly. To adjust the maximum
cooling or heating power, briefly press and
hold either end of the touch control (red or
blue zone).
The set air temperature is kept constant. Tem-
perature and the amount and distribution of
air are controlled automatically. Automatic
mode is switched off when the fan power is
changed manually.
The fan power in automatic mode can be se-
lected using the air conditioning profile in the
air conditioning settings of the infotainment
system ››› page 161
.
Cooling mode
Press the button to switch on or off the cool-
ing system. The cooling mode cools and dehumidifies the
air.
Bl
ower
Page 162 of 405