Page 73 of 405
Instruments and warning/control lamps
Combined operating range display
(hybrid v ehicl
es)
The value shown is calculated and updated
according to the driving style. Therefore, the
range can vary even when the fuel tank is full
and the high-voltage battery is fully charged.
Range can be increased by reducing or
switching off comfort consumers, e.g. air con-
ditioning or seat heating.
Speed warning for winter tyres
If the maximum speed set is exceeded, this is
displayed on the instrument panel
››› page 71.
The speed warning can be set in the Infotain-
ment system, by using the function button
! S E T T I N G S ! D r i v e r a s s i s t a n c e
››› page 90.
Indications of the compass
Depending on the equipment, when the igni-
tion is on, the instrument panel display indi-
cates the direction in which you are driving
with a symbol, e.g. NW for Northwest.
When the Infotainment system is on and there
is no route guidance active, the graphic rep-
resentation of a compass is also shown.
Low consumption driving
Page 74 of 405
Operation
v Tr
avel Assist On/Off ››› page 264
v Side Assist On/Off ››› page 268
v Navigation.
v Audio.
v Telephone.
v Vehicle status. ››› page 73
Service Menu In the Service menu various settings can be
adjust
ed depending on the f
eatures.
Open the Service menu
To open up the S e r v i c e menu, select the
R a n g e information profile while in the D r i v -
i n g d a t a menu, and keep the key press-
ed on the multifunction st eering wheel f
or ap-
proximately 4 seconds. When it is released,
the S e r v i c e menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the S e r v i c e menu and follow the in-
structions on the screen of the instrument
panel. Restart the oil service
Select the
R e s t o r e O i l s e r v i c e menu and
f
ollow the instructions on the instrument pan-
el display.
Restart journey data
Select the R e s e t t r i p menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu E n g i n e c o d e . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the T i m e menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display) The display of the travel data (multifunction
displ
ay) sho
ws different values about the
journey and the consumption. Change from one display to another
Page 76 of 405
Operation
eliminate the cause. If necessary, seek pro-
f essional assist
ance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
cause damage to the vehicle or a fault.
Check the faulty function as soon as possible.
If necessary, seek professional assistance.
Information message
It provides information about processes in the
vehicle.
Driver alert system (break recom-
mendation)* Fig. 56
On the instrument panel display: driver
al ert syst
em symbol. The Fatigue detection informs the driver when
their driving behaviour sho
ws signs of f
atigue.
Function and operation
Fatigue detection determines the driving be-
haviour of the driver when starting a journey,
making a calculation of tiredness. This is con-
stantly compared with the current driving be-
haviour. If the system detects that the driver is
tired, an audible warning is given with a
sound and an optic warning is shown with a
symbol and complementary message on the
instrument panel display ››› Fig. 56
. The mes-
sage on the instrument panel display is
shown for approximately 5 seconds, and de-
pending on the case, is repeated. The system
stores the last message displayed.
The message on the instrument panel display
can be switched off by pressing the button
on the multi-function steering wheel
››› page 82.
The message can be recalled to the instru-
ment panel display using the multifunction
display ››› page 72
.
Conditions of operation
Driving behaviour is only calculated on
speeds above about 65 km/h (40 mph) up to
around 200 km/h (125 mph). Switching on and off
Fatigue det
ection can be activated or deacti-
vated in the infotainment system using the
function button > Driver assistance >
Driver Alert System ››› page 90
. A mark in-
dicates that the adjustment has been activa-
ted.
System limitations
The Fatigue detection has certain limitations
inherent to the system. The following condi-
tions can limit the Fatigue detection or pre-
vent it from functioning.
Page 79 of 405
Instruments and warning/control lamps
country in question for driving with a trailer,
the syst em aut
omatically displays the usual
speed limits, e.g. in Germany 80 km/h
(50 mph).
If the speed warning for the trailer is deacti-
vated, the system displays the speed limits as
if there were no trailer hitched.
Limited operation
The traffic sign detection system has certain
limitations. The following cases may lead the
system to operate with limitations or not at
all:
Page 81 of 405
Instruments and warning/control lamps
Charge: Char ging z
one. Indicates the
amount of charge generated and the
maximum charge.
Power %: Electric traction zone. Indi-
cates the percentage of power used and
the maximum amount of power currently
available.
The power meter shows the usage level of
the electric drive. The power meter bar shows
the current usage level.
A finer coloured border indicates how much
the propulsion can currently be used. De-
pending on the selected driving program and
the current availability of electrical power,
the boundaries of the different colours can
vary.
The following displays can be seen on the
Power meter:
››› Fig. 58
The vehicle recovers electrical energy
Electric drive switched on / Boost (the ve-
hicle runs for a short time at the maximum
power of the electric motor and combus-
tion engine).
The combustion engine must be running.
Green
Blue
A B
C Battery level indicator
V
alid for: hybrid vehicles Fig. 59
Instrument panel: battery level indica-
t or
. The small arrow next to the battery symbol
indicat
es which side of the v
ehicle the charg-
ing cover is on. Note
Page 86 of 405
Operation
Control lamps Contr ol and w
arning lampsThe control and warning lamps are indicators
of w
arnings
›
›› , faults or certain functions.
Some contr ol and w
arning lamps come on
when the ignition is switched on, and switch
off when the engine starts running, or while
driving.
Depending on the model, additional text
messages may be viewed on the instrument
panel display. These may be purely informa-
tive or they may be advising of the need for
action ››› page 66, Instrument panel
.
Depending upon the equipment fitted in the
vehicle, instead of a warning lamp, some-
times a symbol may be displayed on the in-
strument panel.
When certain control and warning lamps are
lit, an audible warning is also heard.
Red warning lamps
Page 89 of 405
Instruments and warning/control lamps
Explanation of the function buttons Fig. 65
Schematic representation: Overview of the
possibl e function butt
ons on the screenTop part of the screen
Curr ent time
Driving pr
ofile and navigation informa-
tion. If the user has an active route, both
the time and the distance to the destina-
tion are displayed. If there is no active
route, the driving profile is displayed. On
vehicles with no available driving profile,
the current address is displayed whenev-
er there is no active route.
Air conditioning information. In vehicles
with heated steering wheels or wind-
screen heating, the corresponding icon is
A B
C displayed when these functions are ena-
bl
ed. If not, the curr
ent outside tempera-
ture is displayed.
Telephone information. Information re-
garding your mobile device is displayed:
available network signal strength, estab-
lished Bluetooth connection, unanswered
calls, new messages, battery status, etc.
Number of notifications and customi-
zation of the system depending on the
user and connectivity.
Bottom part of the screen Main menu display mode:
D E
F : main menu with the 6 main functions
divided int o 2 scr
eens (3 + 3, customisa-
ble by the user by pressing on the func-
tion).
: main menu in mosaic mode (all func- tions of the Infotainment system)
Direct accesses to the functions of the In-
fotainment system (up to 10 functions, 5 +
5, customisable by the user). By pressing
on the icon, you can select/deselect the
functions in question.
G
87
Page 91 of 405
Instruments and warning/control lamps
Vehicle information Fig. 67
Schematic representation: Vehicle infor-
mation and st at
us Pressing on
! S e l e c t i o n
and then on
Vehicle info opens the Vehicle information
menu with the following submenus:
Driving data. The average consump-
tion, average speed, distance travelled,
trip duration and autonomy are shown. It
has 3 memories: “From departure”, “To-
tal calculation” and “From refuelling”
››› page 72.
Vehicle status. The warnings regarding
faults, incidents, memorisation of the
tyre pressure or information of the next
inspection service are displayed. –
–
89
