2020 Seat Mii electric Owner's manual

Introduction
General instructions for use Additional instructions Depending on the vehicle, notifications of the
fact
ory-fitt
ed driving assistance systems are
shown on the display. The notifications close
automatically when they are no longer use-
ful.
All notifications are only displayed after com-
pletely resetting the radio system. Note

Infotainment System
been installed in a different vehicle, please go
t o an authorised SEAT deal
er
.
If only the battery was disconnected, switch
on the ignition before turning the system on
again.
Change basic volume Increase the volume: turn the v
olume con-
tr
ol

Introduction
Menu option: submenus with repercussion
Automatic
: Automatic change t o a r egional
RDS programme.
Fixed
: Stations that support RDS are selected
manually.
Automatic frequency change (AF)
: Au-
tomatic st ation tr

acking

Infotainment System
Menu option: submenus with repercussion
Show clock in standby mode
: When the
device is t urned off
, the current time is shown on
the display.
Colour
: Here you can sel ect marking col
ours for
the screen.
Language
: Here you can manually set the desir ed
l
anguage for the user interface. Alternatively, you
can let the instrument panel language be automati-
cally selected.
Bluetooth :
Bluetooth
: Press to s
witch off Bluetooth

Operating modes
Operating modes R adio
Intr oduction The radio system is supplied in different ver-
sions depending on the country and the fea-
t
ur
es of the vehicle. Some systems also have
a DAB radio receiver. The control overview
contains the possible versions of the system

Infotainment System
RDS is not available in all places or on all ra-
dio st ations.
Depending on the country and the equip-
ment, RDS and s wit
ching to alternative fre-
quencies (AF) can be deactivated in the sys-
tem settings

Operating modes

Infotainment System
Storing the station on the preset
butt ons Fig. 115
Station on the FM frequency band
st or ed in pr
eset button 6. Fig. 116
Additional radio functions. Stations that are already saved are overwrit-
t
en if another st
ation is st

ored in the same
preset button.
Assigning different preset buttons manual-
ly