Safety
Fitting a child seat using the seat belt Fig. 36
On the rear seats: installing the child
seat. If you want to fit a universal approval catego-
ry (U) chil
d seat in your v
ehicle, you must
check that the seat is approved for your vehi-
cle. You will find any necessary information
on the child seat’s orange ECE approval la-
bel. The following table shows the different
fitting options. Weight group
Front passenger seat
a)
Rear side seat Rear central seat b)
Airbag enabled airbag disabledc)
Group 0 to 10 kg XUUU
Group 0+ to 13 kg XUUU
Group I 9 to 18 kg XUUU
Group II 15 to 25 kg XUFUFUF
Group III 22 to 36 kg XUFUFUF
X: Not compatible for the installation of seats install chairs in this configuration.
U: Suit abl
e for universal restraint systems for use in this weight group.
UF: Acceptable for front-facing universal-category child restraint systems approved for this mass group. a)
Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats.
b) For semi-universal chairs where the securing system is the car safety belt and the support bracket, do not use them in the centre rear seat.
c) Seats without height adjustment shoul d be pl
aced in their rearmost position. Seats with height adjustment should be placed in their rearmost and highest position.
42
