Driving
Retrofitting a towing bracket Description Fig. 178
Limits and attachment points for ret-
r ofitting a t
owing bracket. SEAT recommends that towing brackets be
r
etr
ofitted at a specialised workshop. For ex- ample, it may very well be necessary to ad-
just the cooling system or mount thermal pr
o-
tection plates. SEAT recommends visiting a
SEAT dealership for this.
If a towing bracket is retrofitted, the distance
specifications should always be kept in mind.
The distance between the centre of the ball
head and the road ››› Fig. 178
C must never
be l ess than that indicat
ed. This also applies
when the vehicle is fully loaded, including the
technically permissible maximum vertical
load on the coupling device.
Distance specifications ››› Fig. 178
:
Attachment points (lower part of the vehi-
cle)
65 mm (minimum)
350 mm to 420 mm (fully laden vehicle)
1,025 mm
322 mm
448 mm
771.5 mm WARNING
If the cables are improperly or incorrectly
connect ed, this may l
ead to malfunctions
in the entire vehicle electronic system, as
well as to accidents and serious injuries.
Technical data
Engine specifications Petrol engines
1.0 MPI Start-Stop 1.0 MPI Evo Start-Stop 1.0 TSI Start-Stop
Power output in kW (PS) at 1/min 55 (75)/6,20059 (80)/6,25070 (95)/5,500 81 (110)/5,500
Maximum torque (Nm at 1/min) 95/3,000-4,30093/3, 750175/1,500-4,000 200/2,000-3,000
No. of cylinders/displacement (cm 3
) 3/999 3/9993/999 3/999
Fuel Super 95 / Normal 91 (with a slight power loss) ROZ
Gearbox manualmanualmanualmanual DSG
Top speed (km/h) 167 (IV)169 (IV)a)
a)a)
Acceleration from 0-100 km/h (seconds) 14. 715.3a)
a)a)
Maximum authorised weight (kg) 1,620b)
1,620b)
1,640b)
a)a)a)
Data not available as this edition goes to print.
b) Varies depending on the features.
304
