2020 Seat Ibiza change time

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand,
that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no
right at all may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or
omission, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the “Copyright” Act.
All rights on changes are reserved.
❀This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.11.20
Vehicle identification da a
Model:
Vehicle Registration:
Vehicle identification
number:
Date of vehicle registration
or vehicle delivery:
SEAT Official Service:
Service advisor:
Telephone:
Confirmation of eceipt of documentation
and vehicle keys
The following items were delivered
with the vehicle: YES
NO
On-board documentation
First key
Second key
Correct working order of all keys was
checked
Location:





Date:
Signature of owner:

Operation
Service Menu  Applies t
o vehicles with Active Info Display
(Digit al SEAT Cockpit)
In the Service menu various settings can be
adjusted depending on the features.
Open the Service menu
To open up the Service menu, select the
Range information profile while in the Driv-
ing data menu, and keep the  key press-
ed on the multifunction st eering wheel f

or ap-
proximately 4 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel.
Restart the oil service
Select the Restore Oil service menu and
follow the instructions on the instrument pan-
el display. Restart journey data
Sel
ect the

Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display) The display of the travel data (multifunction
displ
ay) sho

ws different values about the
journey and the consumption.
Change from one display to another
Vehicles without multifunction steering wheel:

Operation
Note
If when switching on the ignition warnings
ar e sho
wn about existing faults, it might not
be possible to change the settings or show
the information as described. In this case,
go to a specialised workshop and request a
repair. Control lamps
Contr ol and w

arning lampsThe control and warning lamps are indicators
of w
arnings
›

›› , faults or certain functions.
Some contr ol and w
arning lamps come on
when the ignition is switched on, and switch
off when the engine starts running, or while
driving.
Depending on the model, additional text
messages may be viewed on the instrument
panel display. These may be purely informa-
tive or they may be advising of the need for
action ››› page 68, Instrument panel
.
Depending upon the equipment fitted in the
vehicle, instead of a warning lamp, some-
times a symbol may be displayed on the in-
strument panel.
When certain control and warning lamps are
lit, an audible warning is also heard. Red warning lamps

Operation
Opening and closing Set of v ehicl
e keys
Vehicle key Fig. 81
Assignment of buttons on the remote
contr ol k

ey. Fig. 82
Vehicle key with alarm button. Key to the
››

› Fig. 81
,
››› Fig. 82 Unlock the vehicle
Lock the v

ehicle
Unlock only the rear lid. Press the button
until all the turn signals on the vehicle
flash briefly. You have 2 minutes to open
the rear lid. Once this time has passed, it
will lock again. In addition, the lamp on
the key flashes.
Folding the key shaft in and out
Alarm button*. Only press in the event of
an emergency! When the alarm button is
pressed, the vehicle's sounds and the turn
signals light up for a short time. Press
again to disconnect.
With the vehicle key the vehicle may be
locked or unlocked remotely ››› page 98
.
The vehicle key includes an emitter and bat-
tery. The receiver is in the interior of the vehi-
cle. The range of the vehicle key with remote
control and new battery is several metres
around the vehicle.
If it is not possible to open or close the vehicle
using the remote control key, this should be
re-synchronised ››› page 98
or the battery
changed ››› page 97
.
Different keys belonging to the vehicle may
be used. 1 2
3
4
5 Control lamp on the vehicle key
When a butt
on on the v
ehicle key is pressed,
the control lamp flashes ››› Fig. 81
(arrow)
once briefly, but if the button is held down for
a longer period the control lamp flashes sev-
eral times, such as in convenience opening.
If the vehicle key control lamp does not light
up when the button is pressed, replace the
key's battery ››› page 97
.
Spare key
To obtain a spare key and other vehicle keys,
the vehicle ID number is required.
Each new key contains a microchip which
must be coded with the data from the vehicle
electronic immobiliser. A vehicle key will not
work if it does not contain a microchip or the
microchip has not been encoded. This is also
true for keys which are specially cut for the
vehicle.
The vehicle keys or new spare keys can be
obtained from a SEAT Official Service, a spe-
cialised workshop or an approved key service
qualified to create this kind of key.
New keys or spare keys must be synchronised
before use ››› page 98
. WARNING

Lights
Note
“Tourist light” is only allowed temporarily. If
you ar e pl
anning a long stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights. Interior lights
Lighting of the instrument panel ,
displ

ays and switches Depending on the model, the lighting of the
instrument clust
er and s

witches can be ad-
justed in the infotainment system, using the
button    ! SETT,NGS ! Light !
,nterior lighting
››› page 90
.
With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the  function ac- tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the following message will appear
Turn on the
lights on the instrument panel.
Interior and reading lights Fig. 103
Detail of roof lining: front lighting of
the passenger compartment. Knob Function
 Turns off the interior lights.
 Turning the interior lights on or off.
 The interior lights come on automati-
cally when you unl
ock the v

ehicle,
open a door or remove the key from
the ignition.
The light goes out a few seconds after
closing all the doors, when locking the
vehicle or connecting the ignition.
* /
 Turning the reading light on and off The light controls may vary depending on the
v
ehicl

e version.
Luggage compartment lighting
The light is activated when the rear lid is
open, even when the ignition and lights are
turned off. For this reason, ensure that the
rear lid is always closed.
Ambient light*
The ambient light lights up the area of the
centre console and the footwell area and,
depending on the version, the front door pan-
els as well.
It will be switched on at full brightness when
the doors are opened and the lights will be
dimmed during driving, when the light selec-
tor is set to ,  or .
The intensity of the background light can be
adjusted through the infotainment system
menu. The colour can also be changed in
versions with lighting on the front door panel
(button    ! SETT,NGS ! Back-
ground lighting
››› page 86
). Note
If not all the vehicle doors are closed, the
int erior lights will be s

witched off after ap-
prox. 10 minutes, providing the ignition key
has been removed and the courtesy light
position selected. This prevents the battery
from discharging. 121

Infotainment system

v Ex cit
ation of speaker channels through
class AB final stages.

v Audio signal processing in digital internal
signal processor (DSP).

v Independent subwoofer in the luggage
compartment.

v Setting options:

v User equaliser: 5 bands.

v Sound distribution: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones:

vManual (Driver, Front and All)

v Subwoofer volume.
Connectivity Wi-Fi

v Wi-Fi conf orming t

o IEEE 802.11 b/g/n.

v Transfer in 2.4 GHz and 5 GHz.

v Three Wi-Fi modes at the same time:

v Tethering (2.4 GHz).

v 2.4 GHz access point.

v Connect System:

v Simultaneous connection of up to 8 Wi-Fi
devices.

v Media System:

vSimultaneous connection of up to 2 Wi-Fi
devices.

v Connect System:
v
Internet connection via Wi-Fi:

v T

ethering through the customer's
phone.

v Customer access point (clients) in the
vehicle.

v Media System:

vInternet connection via Wi-Fi:

vApple CarPlay wireless.

v Apple CarPlay and Android Auto over Wi-Fi.

v Pairing process simplified by WPS or QR
code.
Bluetooth® profiles
There can be a maximum of two mobile devi-
ces connected to the Bluetooth® hands-free
and a third device connected to the Blue-
tooth® as a music player.
When a mobile phone is connected to the tel-
ephone management system, a data ex-
change takes place via one of the Bluetooth®
profiles.

Start and driving
Economical and environmentally
friendly driving Fuel consumption, environmental pollution
and w
ear t
o the engine, brakes and tyres all
depend largely on driving style. Consumption
can be reduced between 10-15% with an effi-
cient driving type. The following section gives
you some tips on lessening the impact on the
environment and reducing your operating
costs at the same time.
Active cylinder management (ACT®)*
Depending on vehicle equipment, the active
cylinder management (ACT®) may deacti-
vate some of the engine cylinders if the driv-
ing situation does not require too much pow-
er.
Foresight when driving
If you think ahead when driving, you will need
to brake less and thus accelerate less. Take
advantage of the inertia of the vehicle when-
ever possible, with a gear engaged. This
takes advantage of the engine braking effect,
reducing wear on the brakes and tyres. Emis-
sions and fuel consumption will drop to zero.
Changing gear to save energy
An effective way of saving is to change in ad-
vance to a higher gear. Manual transmission: shift up fr
om first t
o
second gear as soon as possible. Choosing
the right gear enables fuel savings. Select the
highest possible gear appropriate for the
driving situation (the engine should continue
functioning with cyclical regularity).
Automatic transmission: accelerate gradu-
ally and without reaching the “kick-down”
position.
Avoid driving at high speed
Avoid travelling at your vehicle’s top speed,
whenever possible. Fuel consumption, emis-
sion of harmful gases and noise pollution
multiply as speed is increased. Driving at
moderate speeds will help to save fuel.
Reduce idling time
In vehicles with the Start-Stop system idling is
automatically reduced. In vehicles without
the Start-Stop system it is worth switching off
the engine, for example, at level crossings
and at traffic lights that remain red for long
periods of time. When an engine has reached
operating temperature, and depending on
the cylinder capacity, keeping it switched off
for a minimum of about 5 seconds already
saves more than the amount of fuel necessa-
ry for restarting.
The engine takes a long time to warm up
when it is idling. Mechanical wear and pollu-
tant emissions are also especially high during this initial warm-up phase. It is therefore best
to driv
e off immediately after starting the en-
gine. Avoid running the engine at high speed.
Regular maintenance
Regular servicing helps in saving fuel even
before the engine is started. A well-serviced
engine gives you the benefit of improved fuel
efficiency as well as maximum reliability and
an enhanced resale value. A badly serviced
engine can consume up to 10% more fuel
than necessary.
Avoid short journeys
The engine and catalytic converter need to
reach their optimal operating temperature
in order to minimise fuel consumption and
emissions.
A cold engine consumes a disproportionate
amount of fuel. The engine reaches its work-
ing temperature after about four kilometres
(2.5 miles), when fuel consumption will return
to a normal level.
Check tyre pressure
Always make sure the tyres are inflated to the
correct pressures ››› page 278
to save fuel. If
the pressure is below half bar, fuel consump-
tion may increase by 5%. Due to the greater
rolling resistance, under-inflation also increa-
ses tyre wear and impairs handling. »
209

Driving
Advance warning
If the syst em det
ects a possible collision with
the vehicle in front, it alerts the driver by
means of an audible warning and an indica-
tion on the instrument panel display
››› Fig. 155.
The warning moment varies depending on
the traffic situation and driver behaviour. At
the same time, the vehicle will prepare for a
possible emergency braking ››› .
Critical w arning
If the driv

er fails to react to the advance
warning, the system may actively intervene
in the brakes and generate a brief jolt to warn
the driver of the imminent danger of a colli-
sion.
Automatic braking
If the driver also fails to react to the critical
warning, the system may initiate independ-
ent emergency braking by progressively in-
creasing the braking in accordance with how
critical the situation is.
Driver emergency brake assistance sys-
tem
The system may detect that the driver is not
braking hard enough to avoid the collision. In
this case, it will increase the braking intensity. The system cannot prevent a collision, al-
though it can significantly minimise the con-
sequences by reducing the speed and the
f

orce of the impact. WARNING
Observe the safety warnings ››

› in Con-
tr ol and w
arning lamps on page 85. WARNING
Front Assist cannot change the laws of
physics or r epl

ace the driver in terms of
keeping control of the vehicle and reacting
to a possible emergency situation. WARNING
Following a Front Assist emergency warn-
ing, pay immediat e att

ention to the situa-
tion and try to avoid the collision as appli-
cable.