2020 Seat Ibiza display

Operation
Service Menu  Applies t
o vehicles with Active Info Display
(Digit al SEAT Cockpit)
In the Service menu various settings can be
adjusted depending on the features.
Open the Service menu
To open up the Service menu, select the
Range information profile while in the Driv-
ing data menu, and keep the  key press-
ed on the multifunction st eering wheel f

or ap-
proximately 4 seconds. When it is released,
the Service menu will be displayed. Now
you can browse through the menu using the
keys on the multifunction steering wheel as
usual.
Restart the service interval display
Select the Service menu and follow the in-
structions on the screen of the instrument
panel.
Restart the oil service
Select the Restore Oil service menu and
follow the instructions on the instrument pan-
el display. Restart journey data
Sel
ect the

Reset trip menu and follow the
instructions on the instrument panel display
to reset the value.
Identifying letters on engine (LDM)
Select the menu Engine code . The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the Time menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunc-
tion display) The display of the travel data (multifunction
displ
ay) sho

ws different values about the
journey and the consumption.
Change from one display to another
Vehicles without multifunction steering wheel:

Operation
Things to note
If the v ehicl
e is left parked for a long time im-
mediately after refuelling, the natural gas lev-
el indicator may not accurately indicate the
same level shown after refuelling when the
vehicle is started up again. This is not due to a
leak in the system, but to a drop in pressure in
the gas tank for technical reasons after a
cooling phase just after refuelling. Note
In vehicles with natural gas engines, the
petr ol t

ank fuel level gauge may display
the refuelled amount with a slight delay
(depending on the refuelled amount). Engine coolant temperature indica-
t
or

. Fig. 71
Analogue instrument panel: engine
cool ant t

emperature indicator. Fig. 72
Digital instrument panel: engine cool-
ant t emper

ature indicator. Cool zone. The engine has not r
eached
oper
ating temperature yet. Avoid high
speeds and stressing the engine if it has
not reached operating temperature.
Normal zone. At high outside tempera-
tures and when making the engine work
hard, the diodes may continue lighting up
and reach the upper zone. This is no
cause for concern, provided the control
lamp does not light up 
Warning area. When the engine is work-
ing hard, especially at high outside tem-
peratures, the diodes may light up in the
warning area.
The coolant temperature gauge only works
when the ignition is switched on. A B
C Control and warning lamp

It lights up red

Instruments and warning/control lamps
Operation using the multifunction
st eering wheel Fig. 73
Right side of the multifunction steering
wheel : butt
ons to the menus and information
displays on the instrument panel. As long as a priority 1
››

› page 75
warning is
active, it will not be possible to access any
menu. Some warnings can be confirmed and
hidden with the button  of the multifunction
st eering wheel
›

›› Fig. 73
.
Select a menu or an informative display

Operation
Note
If when switching on the ignition warnings
ar e sho
wn about existing faults, it might not
be possible to change the settings or show
the information as described. In this case,
go to a specialised workshop and request a
repair. Control lamps
Contr ol and w

arning lampsThe control and warning lamps are indicators
of w
arnings
›

›› , faults or certain functions.
Some contr ol and w
arning lamps come on
when the ignition is switched on, and switch
off when the engine starts running, or while
driving.
Depending on the model, additional text
messages may be viewed on the instrument
panel display. These may be purely informa-
tive or they may be advising of the need for
action ››› page 68, Instrument panel
.
Depending upon the equipment fitted in the
vehicle, instead of a warning lamp, some-
times a symbol may be displayed on the in-
strument panel.
When certain control and warning lamps are
lit, an audible warning is also heard. Red warning lamps

Instruments and warning/control lamps
Explanation of the function buttons Fig. 75
Schematic representation: Overview of the
possibl e function butt
ons on the screenTop part of the screen
Curr ent time
Driving pr

ofile and navigation informa-
tion. If the user has an active route, both
the time and the distance to the destina-
tion are displayed. If there is no active
route, the driving profile is displayed. On
vehicles with no available driving profile,
the current address is displayed whenev-
er there is no active route.
Air conditioning information. In vehicles
with heated steering wheels or wind-
screen heating, the corresponding icon is
A B
C displayed when these functions are ena-
bl
ed. If not, the curr
ent outside tempera-
ture is displayed.
Telephone information. Information re-
garding your mobile device is displayed:
available network signal strength, estab-
lished Bluetooth connection, unanswered
calls, new messages, battery status, etc.
Number of notifications and customi-
zation of the system depending on the
user and connectivity.
Bottom part of the screen Main menu display mode:
D E
F : main menu with the 6 main functions
divided int o 2 scr
eens (3 + 3, customisa-
ble by the user by pressing on the func-
tion).
: main menu in mosaic mode (all func- tions of the Infotainment system)
Direct accesses to the functions of the In-
fotainment system (up to 8 functions, 4 +
4, customisable by the user). By pressing
on the icon, you can select/deselect the
functions in question.
G
87

Instruments and warning/control lamps
Vehicle information Fig. 77
Schematic representation: Vehicle infor-
mation and st at
us Pressing on 
! Selection
and then on

Vehicle info opens the Vehicle information
menu with the following submenus:
Driving data. The average consump-
tion, average speed, distance travelled,
trip duration and autonomy are shown. It
has 3 memories: “From departure”, “To-
tal calculation” and “From refuelling”
››› page 74.
Vehicle status. The warnings regarding
faults, incidents, memorisation of the
tyre pressure or information of the next
inspection service are displayed. –
–

89

Operation
time of year, thus causing serious injuries,
illness or e
v
en death. CAUTION
Before opening or closing the rear lid, make
sur e that ther

e is enough space to open or
close it, e.g. when pulling a trailer or in a
garage. Note
Before closing the rear lid, make sure that
the k ey has not been l

eft inside the luggage
compartment. Opening and closing the rear lid
Fig. 93
Rear lid: opening from outside. The rear lid opening system operates electri-
cally. It is activ
at

ed by using the insignia sha-
ped handle on the rear lid ››› Fig. 93
. To lock or unlock the rear lid, press the d or
 buttons of the v
ehicle key.
A warning appears on the instrument panel
display if the rear lid is open or not properly
closed.* An audible warning is also given if it
is opened while the vehicle is moving faster
than 6 km/h (4 mph)*.
Opening and closing

Introduction
Technical data Radio with integrated hardware (8.25 ")
1)
The f act
ory-mounted radio in the vehicle with
integrated hardware includes country-specif-
ic components and software for connectivity
and for the execution of vehicle, comfort and
infotainment functions.
The corresponding indications are shown on
the radio screen and partly on the instrument
panel.

v Capacitive colour screen:

v 8.25 inch version, TFT, WVGA: 1082 x 480
pixels.

v Touch operation via the device screen, ro-
tary push-button, menu button and buttons
on the multifunction steering wheel.
Central computer with control and display
unit (10") 2)
The factory-mounted central computer in the
vehicle includes country-specific compo-
nents and software for connectivity and for
the execution of vehicle, comfort and infotain-
ment functions. The corresponding indications are shown on
the contr
ol and displ

ay unit screen and partly
on the instrument panel.

v Capacitive colour screen:

v Using the equipment with:

v Touch zones Touch operation.

v Buttons on the multifunction steering
wheel.

v Approach sensors (driver and passenger
side recognition, gesture control).
Vehicle and comfort functions

v Driver assistance system settings.

v Heating and air conditioning settings.

v Lights and visibility function settings.

v Vehicle comfort settings.

v Parking and manoeuvring settings.
Sound system Basic equipment:
The inf
ot

ainment system that is supplied from
the factory is equipped as follows:

v Speakers in different locations and with dif-
ferent power levels (watts).

v Internal amplifier depending on the system:
v
4 speakers: 2 x 20 W

v 6 speak

ers: 5 x 20 W

v Setting options:

v Equaliser, depending on the system:

v 4 speakers: treble, mid and bass.

v 6 speakers: 5 frequency bands or pre-
defined settings.

v Sound distribution, depending on the sys-
tem:

v4 speakers: Balance (left / right)

v 6 speakers: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones (valid for the
6-speaker system):

vManual (Driver and All)

v Automatic depending on the seats oc-
cupied.
Optional sound system
The infotainment system can be extended
with an optional sound system as follows:
v 7 speakers in different locations and with
different power levels (watts).

v 300W external amplifier (Ethernet or CAN,
depending on the infotainment system),
which processes the audio signals sent by
the central computer. »1)
Equipment name: Media System
2) Equipment name: Connect System.
155