Page 236 of 372
Driving
The control lamp should light up for a few
seconds when the ignition is s wit
ched on. It
shoul d go out once the engine is st
art
ed.WARNING
Never ignore the warning lamps or messag-
es.
Page 238 of 372
Driving
engage a lower gear when the engine works
“irr egul
arly”. F
or the first 1000 km or
600 mil
es, please note:
Page 239 of 372

Start and driving
The engine takes a long time to warm up
when it is idling. Mechanical w ear and pollu-
t ant emissions ar e al
so especially high during
this initial w
arm-up phase. It is therefore best
to drive off immediately after starting the en-
gine. Avoid running the engine at high speed.
Regular maintenance
Regular servicing helps in saving fuel even
before the engine is started. A well-serviced
engine gives you the benefit of improved fuel
efficiency as well as maximum reliability and
an enhanced resale value. A badly serviced
engine can consume up to 10% more fuel
than necessary.
Avoid short journeys
The engine and catalytic converter need to
reach their optimal operating temperature
in order to minimise fuel consumption and
emissions.
A cold engine consumes a disproportionate
amount of fuel. The engine reaches its work-
ing temperature after about four kilometres
(2.5 miles), when fuel consumption will return
to a normal level.
Check tyre pressure
Always make sure the tyres are inflated to the
correct pressures
Page 268 of 372
Driving
The control lamps light up together when the
ignition is s wit
ched on and shoul d t
urn off af
-
ter approximately 2 seconds. This is the time
taken for the function check.
Brake assist systems Electronic Stability Control (ESC)*
The ESC helps to improv
e saf
ety. It reduces
the tendency to skid and improves the stabili-
ty and roadholding of the vehicle. The ESC
detects critical handling situations, such as
vehicle understeer or oversteer, or wheelspin
on the driving wheels. It stabilises the vehicle
by braking individual wheels or by reducing
the engine torque. The warning lamp will
flash on the instrument panel when the ESC is
intervening !.
The ESC includes the anti-lock brake system
(ABS), the hydraulic brake assist (HBA), the
traction control system (ASR), electronic dif-
ferential lock (EDS), electronic torque control
(XDS).
ESC also helps stabilise the vehicle by
changing the torque.
The ASR can be deactivated when wheel spin
is desirable
Page 290 of 372
Driving
Pin Meaning
12 Unassigned
13 Earth for pin 9 Power socket for trailer
The vehicle is fitted with a 13-pol
e po
wer
socket for the connection between the trailer
and the vehicle. With the engine running,
electrical devices on the trailer receive power
from the electrical connection (pin 9 and pin
10 of the trailer power socket).
If the system detects that a trailer has been
connected, the consumers on the trailer will
receive electricity through this connection
(pins 9 and 10). Pin 9 has a permanent live.
This powers, for example, the trailer
Page 304 of 372