2
INTRODUCTION
INTRODUCTION .............................................................. 13
HOW TO USE THIS MANUAL ....................................... 14
Essential Information .................................................... 14
Symbols ........................................................................... 14
WARNINGS AND CAUTIONS ....................................... 14
VAN CONVERSIONS/CAMPERS .................................. 14
VEHICLE MODIFICATIONS/ALTERATIONS............. 15
GETTING TO KNOW YOUR VEHICLE
VEHICLE USER GUIDE — IF EQUIPPED...................... 16
KEYS ..................................................................................... 18
Key Fob ........................................................................... 18
IGNITION SWITCH ........................................................... 25
Keyless Push Button Ignition....................................... 25
REMOTE START — IF EQUIPPED .................................. 28
How To Use Remote Start ............................................ 28
Remote Start Abort Message........................................ 28
To Enter Remote Start Mode........................................ 29
To Exit Remote Start Mode Without Driving The
Vehicle ............................................................................. 29
To Exit Remote Start Mode And Drive The
Vehicle ............................................................................. 29
Remote Start Comfort Systems — If Equipped .........29
General Information ......................................................30
SENTRY KEY .......................................................................31
Key Programming ........................................................31
Replacement Keys..........................................................32
General Information ......................................................32
VEHICLE SECURITY ALARM .........................................33
To Arm The System .......................................................33
To Disarm The System ..................................................34
Rearming Of The System ..............................................34
Security System Manual Override ..............................34
DOORS .................................................................................35
Manual Door Locks .......................................................35
Power Door Locks — If Equipped .............................36
Power Side Steps — If Equipped.................................37
Keyless Enter-N-Go — Passive Entry ........................37
Automatic Door Locks — If Equipped .......................41
Child-Protection Door Lock ........................................42
SEATS ...................................................................................42
Manual Front Seat Adjustment....................................43
Manual Rear Seat Adjustment .....................................45
Power Front Seat Adjustment — If Equipped ..........46
Driver Memory Seats — If Equipped .........................47
Heated Seats — If Equipped ........................................51
2020_DT_1500_OM_US.book Page 2
46 GETTING TO KNOW YOUR VEHICLE
Power Front Seat Adjustment — If Equipped
Some models may be equipped with eight-way power driver
and passenger seats. The power seat switches are located on
the outboard side of the driver and passenger seat cushions.
There are two power seat switches that are used to control
the movement of the seat cushion and the seatback.Power Seat Switches Adjusting The Seat Forward Or Rearward
The seat can be adjusted both forward and rearward. Push
the seat switch forward or rearward. The seat will move in
the direction of the switch. Release the switch when the
desired position has been reached.
Adjusting The Seat Up Or Down
The height of the seats can be adjusted up or down. Pull
upward or push downward on the rear of seat switch, the
seat will move in the direction of the switch. Release the
switch when the desired position has been reached.
Tilting The Seat Up Or Down
The angle of the seat cushion can be adjusted in four direc
-
tions. Pull upward or push downward on the front or rear of
the seat switch, the front or rear of the seat cushion will move
in the direction of the switch. Release the switch when the
desired position is reached.
Reclining The Seatback
The angle of the seatback can be adjusted forward or rear -
ward. Push the seatback switch forward or rearward, the
seat will move in the direction of the switch. Release the
switch when the desired position is reached.
1 — Power Seat Switch
2 — Power Seatback Switch
2020_DT_1500_OM_US.book Page 46
54 GETTING TO KNOW YOUR VEHICLE
• Push the ventilated seat button once to choose HI.
• Push the ventilated seat button a second time to choose MED.
• Push the ventilated seat button a third time to choose LO.
• Push the ventilated seat button a fourth time to turn the ventilated seat off.
NOTE:
The engine must be running for the ventilated seats to
operate.
Plastic Grocery Bag Retainers
Retainer hooks which will hold plastic grocery bag handles
are attached to the underside of the rear seat. To access these
hooks, flip the rear seat bottom upward.
HEAD RESTRAINTS
Head restraints are designed to reduce the risk of injury by
restricting head movement in the event of a rear impact.
Head restraints should be adjusted so that the top of the head
restraint is located above the top of your ear. NOTE:
Do not reverse the head restraints (making the rear of the
head restraint face forward) in an attempt to gain additional
clearance to the back of your head.
Front Head Restraints
Your vehicle is equipped with front four way driver and
passenger head restraints.
To raise the head restraint, pull upward on the head
restraint. To lower the head restraint, push the adjustment
button, located at the base of the head restraint, and push
downward on the head restraint.
WARNING!
• All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head
restraints are placed in their proper positions in order
to minimize the risk of neck injury in the event of a
crash.
• Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head
restraints improperly adjusted or removed could cause
serious injury or death in the event of a collision.
2020_DT_1500_OM_US.book Page 54
GETTING TO KNOW YOUR VEHICLE 55
To adjust the head restraint forward, pull the top of the head
restraint toward the front of the vehicle as desired and
release. To adjust the head restraint rearward, pull the top of
the head restraint to the forward most position and release.
The head restraint will return to the rear most position.
NOTE:
If your vehicle is equipped with a front bench seat, the center
head restraint is not adjustable or removable.Head Restraint Adjustment Button NOTE:
The head restraints should only be removed by qualified
technicians, for service purposes only. If either of the head
restraints require removal, see an authorized dealer.
Rear Head Restraints
The outboard head restraints are non-adjustable, but can be
folded down for improved rearward visibility. Push the
button on the outboard side of the head restraint to release.
To return the head restraint to its upright position, push up
on the head restraint until it locks back into place.
WARNING!
• All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head
restraints are placed in their proper positions in order
to minimize the risk of neck injury in the event of a
crash.
• Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head
restraints improperly adjusted or removed could cause
serious injury or death in the event of a collision.2
2020_DT_1500_OM_US.book Page 55
GETTING TO KNOW YOUR VEHICLE 59
NOTE:
• Always adjust the pedals to a position that allows fullpedal travel.
• Further small adjustments may be necessary to find the best possible seat/pedal position.
• For vehicles equipped with Driver Memory Seat, you can use your key fob or the memory switch on the driver’s
door trim panel to return the adjustable pedals to
pre-programmed positions.
• Refer to “Driver Memory Seat” in this chapter for further information.MIRRORS
Inside Day/Night Mirror — If Equipped
The mirror head can be adjusted up, down, left, and right for
various drivers. The mirror should be adjusted to center on
the view through the rear window.
Headlight glare from vehicles behind you can be reduced by
moving the small control under the mirror to the night position
(toward the rear of the vehicle). The mirror should be adjusted
while set in the day position (toward the windshield).
Adjusting Rearview Mirror
WARNING!
Do not adjust the pedals while the vehicle is moving.
You could lose control and have an accident. Always
adjust the pedals while the vehicle is parked.
CAUTION!
Do not place any article under the adjustable pedals or
impede its ability to move, as it may cause damage to the
pedal controls. Pedal travel may become limited if
movement is stopped by an obstruction in the adjustable
pedal's path.
2
2020_DT_1500_OM_US.book Page 59