178
Practical information
► Insert a finger into the notch in the upper part 
of the screen.
►  Pull towards you to unclip the unit.
Repeat these operations for the other screen.
Energy economy mode
This system manages the duration of use of 
certain functions, in order to conserve a sufficient 
level of charge in the battery with the ignition off.
After switching off the engine, you can still 
use functions such as the audio and telematic 
system, the wipers and the dipped beam 
headlamps or courtesy lamps, for a combined 
duration of approximately 40 minutes.
Selecting the mode
A confirmation message is displayed when 
energy economy mode is entered, and the active 
functions are placed on standby.
If a telephone call is in progress at the 
time, it will be maintained for around 10 
minutes via the audio system’s hands-free 
system.
Exiting the mode
These functions are automatically reactivated the 
next time the vehicle is used.
To restore the use of these functions 
immediately, start the engine and let it run:
–  For less than 10 minutes, to use the 
equipment for approximately 5 minutes.
► Stop the vehicle and check that the snow 
chains are correctly tightened.
It is strongly recommended that before 
you leave, you practise fitting the snow 
chains on a level and dry surface.
Avoid driving with snow chains on roads  that have been cleared of snow to avoid 
damaging the vehicle's tyres and the road 
surface. If the vehicle is fitted with alloy 
wheels, check that no part of the chain or its 
fixings is in contact with the wheel rim.
Hybrid vehicles
The use of snow chains is only 
authorised on the  front wheels.
Very cold climate screen
(Depending on country of sale.)
This removable protective screen prevents the 
accumulation of snow at the radiator cooling fan.
It consists of two elements to be attached to the 
front bumper.
 
 
For fitting / removing, it is recommended 
that you contact a PEUGEOT dealer or a 
qualified workshop.
Before any operation, ensure that the 
engine is off and the cooling fan has 
stopped.
It is essential to remove them when:
–  the exterior temperature exceeds 
10°C.
–
 
towing.
–
 
the speed is above 75 mph (120
   km/h).
Fitting 
 
► Hold the corresponding screen in front of the 
lower grille of the bumper .
►
 
First insert the two lower fixing brackets into 
the bumper
.
►
 
T
 ilt the screen upwards until the three upper 
fixing brackets click into the bumper.
►
 
Check that the unit is firmly held by pressing 
around the edges.
Repeat these operations for the other screen.
Removing