Maintaining
thetime-dependent servicesched-
ule:
X Note down theservice duedate display edin
the multifunction displaybeforedisconnec t-
ing the battery.
or X Aft erreconn ectingthebattery, subtract the
battery disconnec tionperiods fromtheser-
vice date shown onthe display . Hiding
service displays
X Press the0076 or0038 button onthe steer-
ing wheel. Showing
servicedisplays
X Switch onthe ignition.
X Press 0059or0065 onthe steering wheel
to select theServ. Serv.
menu.
X Press 0063or0064 toselect theASSYST ASSYST
PLUS PLUS
submenu andconfirm bypressing the
0076 button.
The service duedate appears inthe multi-
funct iondisplay . Informat
ionabout Service
Resetting theASSYST PLUSservice
interval display !
If
the ASS YST PLUS service interval dis-
play hasbeen inadvertent lyreset, thisset-
ting canbecorrect edataq ualified special-
ist workshop.
Have service workcarried outasdescribed
in the Maintenanc eBooklet. Thismay other-
wise leadtoincreased wearanddamage to
the major assemblies orthe vehicle.
Aq ualified specialist workshop, e.g.anauthor-
ized Mercedes-Ben zCenter, willreset the
ASS YST PLUS service interval displayafterthe
service workhasbeen carried out.Youcan
also obtain further information onmainte-
nance work,forexample. Special
servicerequirements The
specified maintenanc einterval takesonly
the normal operation ofthe vehicle into
account. Serviceworkwillneed tobe per-
formed moreoften ifthe vehicle isoperated
under arduou scondition sorincreased loads.
The ASSYST PLUS service interval displayis
only anaid. Thedriver ofthe vehicle isrespon-
sible forwhether serviceworkwillneed tobe
performed morefrequently thanrequired asa
result ofthe actual operating conditions
and/or loads.
Examples ofarduou soperating condition s:
R regular citydriving withfrequent intermedi-
ate stops
R the vehicle isprimarily usedtotravel short
distances
R frequent useinmountainous terrainoron
poor roadsurfaces
R the engine isoften leftidling forlong peri-
ods
R particularly dustycondition s,or ifair-recir-
culation modeisfrequently used
In these orsimilar operating conditions,have
the interior filter,airfilter, engine oiland oilfil-
ter, forexample, changedmorefrequently.
Under arduou soperating condition s,the tires
must becheck edmore often. Further informa-
tion canbeobtained ataq ualified specialist
workshop.
Driving abroad An
exten siveMercedes-Ben zService network
is also availa bleinother countr ies.You can
obtain further information fromanyauthorized
Mercedes-Ben zService Center. Care
Notes
oncare H
Environmental
note
Dispose ofempty packaging andcleaning
cloths inan environm entallyresponsible
manner.
! When
cleaning yourcar,donot use:
R dry, coarse orhard cloths
R abrasive cleaningagents 246
CareMaintenance
andcare
If
the indicator/wa rninglampsdon otlight up
at low temperature s,itis very likely thatthe
discha rgedbattery hasfrozen. Inthis case,
you may neither chargethebattery norjump-
start thevehicle .The service lifeofat hawed -
out battery maybeshorter. Thestarting char-
acteristics canbeimpa ired, particul arlyatlow
temperature s.Have thethawed -outbattery
checked ataq ualifie dspecia listworkshop.
Rea dthe battery charger's operatinginstruc-
tions before charging thebattery.
X Open thehood.
X Connect thebattery charger tothe positive
terminal andground pointinthe same order
as when connecting thedonor battery inthe
jump-starting procedure(Y page 261). Replaci
ngthe 12Vb attery
Observe thenotes onthe 12Vb attery
(Y page 258).
Mercedes-Benz recommendsthatyouhave
the 12Vb attery replacedataq ualifie dspe-
ciali stworkshop, e.g.atan authori zed
Mercedes-Benz Center. If
you want torepla cethe battery yourself,
observe thefollow ingnotes:
R Alway srepla cead efective batterywitha
battery whichmeets thespecific require-
ments ofthe vehicle .
The vehicle isequi pped withanAGM
(Absorbent GlassMat) technology battery.
Full vehicle functionality isonly guaranteed
with anAGM battery. Forsafety reasons,
Mercedes-Benz recommendsthatyouonly
use batteries whichhavebeen tested and
appro vedforyou rvehicle byMercedes-
Benz.
R Use detachab leparts suchasbreather
hoses, angled connecting piecesorterminal
covers fromthebattery whichisto be
repla ced.
R Make surethatthevent hose isalw ays con-
nected tothe origina lopening onthe bat-
tery side.
R Install existing orsupp liedcellcaps topre-
vent gases orbattery acidfrom escapi ng.
R Make surethatthedetachab leparts are
connected againinthe same way. Jump-star
ting
For thejump-starting procedure,use only thejump-starting connectionpointinthe engine com-
partment, consisting ofap ositive terminal andaground point. G
WARNING
Battery acidiscaustic. Thereisar isk ofinjury.
Avoid contact withskin, eyesorclothing. Donot inhal eanybattery gases.Don otlea no ver the
battery. Keepchildre nawayfrom batteries. Washawaybattery acidimmedi atelywithplenty of
clean water andseek medica lattention. G
WARNING
During charging andjump-starting, explosivegases canescape fromthebattery. Thereisa
risk ofan explosi on.
Particul arlyavoid fire,open flames ,creating sparksandsmoking. Ensurethereissufficie nt
ventilation whilecharging andjump-starting. Donot leano ver abattery. G
WARNING
During thecharging process,abattery produceshydro gengas. Ifas hort circuit occurs or
sparks arecreated, thehydro gengascan ignite. Thereisar isk ofan explosi on. Jump-st
arting
261Breakd owna ssis tance
Z
R
Make surethatthepositive terminal ofac onn ected battery doesnotcome intocontactwith
vehicle parts.
R Never placemetal object sortools onabattery.
R Itis important thatyouobserve thedescribed orderofthe battery terminals whenconnect-
ing and disconnec tingabattery.
R When jump-st arting,makesurethatthebattery poleswithidentical polarityareconn ected.
R Itis particularly importanttoobserve thedescribed orderwhenconnecting anddisconnec t-
ing the jumper cables.
R Never connectordisconnec tthe battery terminals whiletheengine isrunning. G
WARNING
Ad ischarged batterycanfreeze attemperatures belowfreezing point.Whenjump-st artingthe
vehicle orcharging thebattery, gasescanescape fromthebattery. Thereisar isk ofan explo-
sion.
Allow thefrozen battery tothaw outbefore charging itor jump-st arting.
! Avoid
repeated andlengthy startingattempt s.Otherwise, thecatalytic convertercould be
damaged bythe non- combusted fuel.
If the indicator/warnin glamps donot light upatlow temperatures, itis very likely thatthedis-
charged batteryhasfrozen .Int his case, youmay neither chargethebattery norjump-st artthe
vehicle. Theservice lifeofat hawed-out batterymaybeshorter. Thestartin gcharacterist icscan
be impaired, particularly atlow temperatures. Havethethawed-out batterycheckedataq uali-
fied specialist workshop.
Do not start thevehicle usingarapid charging device.Ifyour vehicle's batteryisdischarged, the
engine canbejump-st artedfromanother vehicleorfrom adonor battery usingjumper cables.
Observe thefollowing points:
R The battery isnot accessible inall vehicles. Ifthe other vehicle's batteryisnot accessible,
jump-st artthe vehicle usingadonor battery orajump-st artingdevice.
R You may onlyjump-st artthe vehicle whentheengine andexhaust systemarecold.
R Do not start theengine ifthe battery isfrozen .Let the battery thawfirst.
R Only jump-st artfrom batteries witha12V voltage rating.
R Only usejumper cableswhichhaveasufficient cross-sectionandinsulated terminalclamps.
R Ifthe battery isfully discharged, leavethebattery thatisbeing usedtojump-st artconn ected
for afew minutes beforeattempt ingtostart. Thischarges thebattery slightly.
R Make surethatthetwo vehicles donot touch.
Make surethat:
R The jumper cablesarenot damaged.
R Bare parts ofthe terminal clampdonot come intocontactwith other metal partswhile the
jumper cablesareconn ected tothe battery.
R The jumper cablescannot comeintocontactwith parts which canmove whentheengine is
running, suchasthe V-belt pulleyorthe fan.
X Secure thevehicle byapply ingthe electric parking brake.
X Shift thetransmission toposition 005D.
X Make surethattheignition isswitched off.Allindicator lampsinthe instrumen tcluster must
be off. When usingtheSmartK ey,turn theSmartK eytoposition 0092inthe ignition lockand
remove it(Y page 118). 262
Jump
-startingBr eakdown assistance
X
Make surethattheignition isswitched off
(Y page 118).
or
X When usingtheSmartK ey,turn theSmart-
Key toposition 0092inthe ignition lockand
remove it(Y page 118).
X Secure thevehicle against rollingaway
(Y page 134).
All indicator lampsinthe instrumen tcluster
must beoff.
The fuses arelocated invarious fuseboxes:
R Fuse boxinthe engine compartmen tonthe
left-hand sideofthe vehicle, whenviewed in
the direction oftravel
R Fuse boxinthe trunk Fuse
boxinthe engine compart ment
i Observe
the"Important safetynotes" sec-
tion (Ypage 266). G
WARNING
When thehood isopen andthewindshield
wipers aresetinmotion, youcan beinjured
by the wiper linkage. Thereisar isk ofinjury.
Always switchoffthe windshield wipersand
the ignition beforeopening thehood. X
Make surethatthewindshield wipersare
turned off.
X Open thehood.
X Use adrycloth toremove anymoisture
from thefuse box.
X To open: openclamps 0044.
X Remove fuseboxcover 0043forwards. X
To close :check whether theseal islying
correct lyin cover 0043.
X Insert cover0043atthe rear ofthe fuse box
into theretainer.
X Fold down cover 0043and close clamps 0044.
X Close thehood. Fuse
boxinthe trunk
i Observe
the"Important safetynotes" sec-
tion (Ypage 266). The
fuse boxislocated inthe trunk behind the
partition covering.
X Open thetrunk lid.
X To open: release cover0043onthe right and
left-hand sideswithaflat object .
X Open cover 0043downwards inthe direction
of the arrow. Fuses
267Breakdown assistance Z
Information
aboutappro vedbrake fluidcan be
obtained atany qualifiedspecia listworkshop
or on the Internet at
<004B005700570053001D00120012004500480059005200110050004800550046
00480047004800560010004500480051005D0011004600520050[ .
i Have
thebrake fluidregul arly repla cedata
qua lifiedspecia listworkshop andthe
repla cement confirmed inthe Maintenance
Booklet. Coo
lant
Important safetynotes G
WARNING
If antifreeze comesintocontact withhot
components inthe engine compartment, it
may ignite. Thereisar isk offire and injury.
Let the engine cooldown before youadd
antifreeze. Makesurethatantifreeze isnot
spil led next tothe fillerneck. Thorou ghly
clean theantifreeze fromcomponents
before starting theengine.
! Only
addcoolant thathasbeen premixed
with thedesire dantifreeze protection. You
could otherwise damagethe engine.
You canfind additional notes onthe coolant
in the follow ingplaces:
R in the Mercedes-Benz Specificationsfor
Service Products,MBBeVo 310.1
- on the Internet at
<004B005700570053001D00120012004500480059005200110050004800550046
00480047004800560010004500480051005D0011004600520050[
- on the Mercedes-Benz BeVoapp
R aq ualifie dspecia lizedworkshop
! Alway
suseasuita blecoolant mixture,
even incountries wherehightemperature s
prevai l.
Otherwise ,the engine cooling systemisnot
sufficie ntlyprotected fromcorrosion and
overhea ting.
i Have
thecoolant regularlyrepla cedata
qua lifiedspecia listworkshop andthe
repla cement confirmed inthe Maintenance
Booklet.
Compl ywiththe important safetynotesfor
service productswhen handli ngcoolant
(Y page 299). The
coolant isam ixture ofwater andanti-
freeze/corrosion inhibitor.Itis responsib lefor
the follow ing:
R anti-corrosion protection
R antifreeze protection
R raisi ngthe boiling point
If the coolant hasantifreeze protection down
to -35 ‡(-37 †), theboiling point ofthe cool-
ant duri ngopera tionisappro ximately 266‡
(130 †).
The <004400510057004C0049005500480048005D0048001200460052005500550052
0056004C00520051[ inhibitorconcentr a-
tion inthe engine cooling systemshould:
R be atlea st50% .This willprotect theengine
cooling systemagainst freezing downto
appro ximately -35‡(-37 †).
R not exceed 55%(antifreeze protectiondown
to -49 ‡[-45 †]). Otherwise ,heat willnot
be dissi pated aseffectively .
If the vehicle haslost coolant, addequa l
amou ntsofwater and<004400510057004C0049005500480048005D0048001200460052005500550052
0056004C00520051[
inhibi tor.
Mercedes-Benz recommendsanantifreeze/
corrosion inhibitorconcentr ateinaccordance
with MBSpecificatio nsfor Service Products
310.1.
i When
thevehicle isfirst delivered, itis fil-
led with acoolant mixture thatensures ade-
qua teantifreeze andanti-corrosion protec-
tion.
i The
coolant ischecked withevery mainte-
nance interval ataq ualifie dspecia listwork-
shop.
Fil ling capacitie s Missi
ngvalu eswere notavai lableat time of
going toprint. Model Capacity
SLC
300 Approx.
8.5USqt
(8.0 l) Mercede
s‑Benz
SLC 43AMG Approx.
8.2USqt
(7.8 l) Servic
eproducts andfilling capacitie s
303Techni caldata Z