2020 MERCEDES-BENZ S-CLASS SALOON LONG lights

R
For the sear chlight: the function is availa‐
ble in theve hicle when it is dar k.
R The front passenger seat is not occupied or a
ch ild is sitting in a child restra int sy stem.
R The hand mo vement is made bythe driver in
th e interaction area abo vethe front
passenger seat.
Switching there ading light on and off Carr
ying out operation of there ading light forthe
driver and front passenger #
Moveyour hand up and down vertically under
th e inside review mir ror.
The reading light is swit ched on or off. Switching
the sear chlight on and off Interaction area
for activating the sear chlight #
Toswitch on: reach across the front
passenger seat with a hand.
The sear chlight is switched on automatically
fo rth e driver. #
Toswitch off: take a hand back away from
th e front passenger seat.
The sear chlight is switched off again. Au
tomatic preselection of the outside mir ror
(COMFORT/reactive) Unti
l now,toset the outside mir rorth e desired
mir ror had tobe selected using a preselection
button in the driver's door.
Wi th th e MBUX Interior Assis tant, the mir rorto
be set is preselected automatically bythe natu‐
ra l mo vement of your head tothe left or right.
When the hand touches the button for adju sting
th e outside mir ror,th e LED under the button of
th e preselected mir ror side lights up.
Use the button toset the position of the active
outside mir ror.
% Preselection of the outside mir ror using but‐
to ns is still possible. Further information on
adjusting the outside mir rors ( / page 168).
% The driver camerais also used forth is appli‐
cation. MBUX multimedia sy
stem 305

#
Select ¥Replace route .
The selected destination address is set as a
new destination. Route guidance begins.
Selecting a route type #
Select Zinthe navigation menu
(/ page 316). #
Select Route.
The route is calculated as a fast route with a
sho rtjou rney time. The trailer mode can be
used if a trailer has been coupled wi th the
ve hicle. If available, you can select online
ro utes. Traf fic announcements forth ero ute
are take n into account via Dynamic route
guidance r.
% Trailer mode and online routes are not availa‐
ble in all countries and for all vehicles.
Calculating alternative routes #
Select Zinthe navigation menu. #
Select View. #
Activate Overview of route after start.
Alternati veroutes are calculated forev ery
ro ute. Selecting alternative
routes
% IfOverview of route after start has been
switched on and a route has been calcula‐
te d, the function is available. #
Select ¡inthe navigation menu. #
Select Other routes. #
When the alternative routes ha vebeen calcu‐
lated, display thero ute in the navigation win‐
dow byswiping totheright or left. #
Select Start.
Ac tivating a commuter route
% A user profile has been created and Allow
destination suggestions has been activated
in the user options (/ page 309).Route
guidance is not active. #
Select Zinthe navigation menu. #
Select Route. #
Activate Activate commuter route .
The navigation sy stem automatically de tects
th at theve hicle is on a commuter route. Fo
rth e daily commuter route, traf fic inci‐
dents on thero ute are also repor ted when
driving without active route guidance. #
Toselect or dele tea commuter route:
selectStart or¨.
Av oiding or using route sections, e.g. mo tor‐
ways orferries #
Select Zinthe navigation menu. #
Select Route. #
Select Avoid options. #
Activate or deacti vate theavo id option.
Ac tivating route guidance with augmented
re ality #
Tap on ¨ inthe map.
The indicator lamp lights up blue.
The video image of the augmented reality
camera is shown on the cent ral display
before a turning manoeuvre. The video image
includes additional information. #
Toreturn tothe navigation map: tap on
¨ again.
The indicator lamp is not lit. MBUX multimedia sy
stem 319

R
Nearest Mercedes-Benz service centre
R Other products and services from Mercedes-
Benz
Data is transfer red during the connection tothe
Mercedes-Benz Cus tomer Centre (/ page 328).
Calling the Mercedes-Benz Cus tomer Centre
using the multimedia sy stem
Re quirements:
R Access toa GSM network is available.
R The contract partner's GSM network co ver‐
age is available in there spective region.
R The ignition must be switched on so that
ve hicle data can be transfer red automati‐
call y.
Multimedia sy stem:
4 © 5
Phone 5
© #
Call Mercedes me connect.
Af ter confirmation, the multimedia sy stem
sends there qu ired vehicle data. The data
transfer is shown in the cent ral displa y. Then,
you can select a service and be connected
to a specialist at the Mercedes-Benz Cus tomer
Centre.
Calling the Mercedes-Benz Cus tomer Centre
af te r automatic accident or breakdown
de tection
Re quirements:
R The vehicle has de tected an accident or
breakdown situation.
R The vehicle is stationar y.
R The hazard warning lights are switched on.
% This function is not available in all countries.
The vehicle can de tect accident or breakdown
situations under cer tain circums tances.
In theeve nt an accident or breakdown is de tec‐
te d, the emer gency guide sho wssafety no tes in
th e multimedia sy stem displa y.
Af terqu itting the emer gency guide displ ayon
th e multimedia sy stem, a prom ptappears asking
whe ther youwo uld like toget support from the
Mercedes-Benz Cus tomer Centre. #
Select Call.
R Afteryo ur agreement, or if the Mercedes
me connect service "Accident and Break‐
down Management" is active, theve hicle
data is transfer red automatically
(/ page 325).
R The Mercedes-Benz Cus tomer Centre
ta ke syo ur call and or ganises the break‐
down and accident assis tance.
Yo u may be charge dfo rth ese services.
% Depending on the se verity of the accident,
an automatic emer gency call can be initi‐
ated. This has prio rity over all other active
calls.
% In addition, if the Mercedes me connect
service "Telediagnostics" is active, a similar
prom ptcan appear af ter a delay in theeve nt
of a breakdown. If you are already in contact
with the Mercedes-Benz Cus tomer Centre or
ha ve already recei ved support, this prom pt
can be igno red or declined. MBUX multimedia sy
stem 327

Indicators in
the displa ys
The following messages appear in the multime‐
dia sy stem display for bo themer gency call sys‐
te ms:
R SOS NOT READY: the ignition is not on or
eCall is not available. This does not necessa‐
ri ly indicate comple tefailure of the emer‐
ge ncy call sy stem. Emer gency calls call still
be transmitte d.
The display only refers to theve hicle and
does not take account of theav ailability of
mobile phone networ ksand the Mercedes-
Benz emer gency call centre.
The functional readiness of the emer gency
call sy stem on theve hicle can be seen when
th eSOS NOT READY display disappears once
th e ignition is switched on.
R G: The icon appears in the display during
an active emer gency call.
% Ifth ere is a malfunction of the emer gency
call sy stem, the loudspeakers, microphone,
airbag or the SOS button, forex ample, are
fa ulty. Yo
u can recognise a fault in the emer gency
call sy stem bythefo llowing displa ys:
R A cor responding message appears onthe
driver displa y.
R The SOS button lights up red continu‐
ousl y. Tr
iggering an automatic emer gency call Re
quirements:
R The ignition is switched on.
R The star ter battery is suf ficiently charge d.
Bo th th e Mercedes-Benz emer gency call sy stem
as well as the11 2 emergency call sy stem (EU
eCall) automatically initiate an emer gency call:
R After activation of there stra int sy stems such
as airbags or seat belt tensioners af ter an
accident
R After an auto matically initia ted emer gency
st op byActive Emergency Stop Assist The emer
gency call has been made:
R Avo ice connection is es tablished with the
emer gency call centre.
R A messa gewith accident data is transmitted
to the emer gency call centre.
The SOS button in theove rhead control panel
fl ashes until the emer gency call is finished.
If no connection can be made tothe public
emer gency services, a cor responding message
appears inthe displa y. #
Dial the emer gency number 112 or an app ro‐
priate local emer gency call number on your
mobile phone.
If an eme rgency call has been initiated:
R Remain in theve hicle if thero ad and traf fic
conditions permit youto do so until a voice
connection is es tablished with the emer‐
ge ncy call centre.
R Onthe basis of the call, the emer gency call
centre decides wh ether it is necessary tocall
re scue teams and/or the police tothe acci‐
dent site. MBUX multimedia sy
stem 335

Fo
r accident clarification purposes, thefo llowing
measures can be take n up toan hour af terthe
emer gency call has been initia ted:
R The cur rent vehicle position can be de ter‐
mined.
R Avo ice connection totheve hicle occupants
can be es tablished.
R Emer gency call da tacan be called up.
% ForRu ssia: various functions, e.g. receiving
traf fic information, cannot be per form ed for
up totwo hou rsafte r sending an emer gency
call. Self diagnosis function of the eme
rgency call
sy stem Yo
ur car verifies the operability of the emer‐
ge ncy call sy stem each time the ignition is ON.
During this time the SOS button lights up redfor
fi ve seconds. In case of sy stem failure, you will
be informed with text messa geon the instru‐
ment clus ter and with red indicator SOS NOT
READY onthe displa y. Please, make sure,
that during 30 seconds af ter
switching ignition ON there d indicator SOS
NOT READY inthe upper right corner of display
is switched OFF, this means the emer gency call
sy stem passed diagnostics successfully. St
arting/ending ERA-GLONASS test mode Re
quirements:
R The star ter battery is suf ficiently charge d.
R The ignition is switched on.
R The vehicle has been stationary for at least
one minute.
% The test mode is cur rently available in the
fo llowing countries, forex ample:
R Russia
R Belarus
R Kazakh stan
R Armenia
R Kyrgyzs tan #
Tostart thete st mode: press and hold the
~ button on the multifunction steering
wheel for at least five seconds.
The test mode is star ted and automatically
ends af terth e language test has been per‐
fo rm ed. #
Toend thete st mode manuall y:switch off
th e ignition.
The test mode is ended. Information on data processing
Processing of personal data via
the
Mercedes-Benz emer gency call sy stem
All processing of personal data via the
Mercedes-Benz emer gency call sy stem cor re‐
sponds with the specifications in the EU Regula‐
tion 20 16/679 "on the pr otection of individuals
with rega rd tothe processing of personal data
(GDPR)".
The data is solely used bythe Mercedes-Benz
emer gency call sy stem forre scue and reco very
in theeve nt of an accident. 338
MBUX multimedia sy stem

Lights
Display messages
Possible causes/consequences and M
MSolutions
: Left dipped beam (examp le) *T
he cor responding light source is defective. #
Drive on carefully. #
Consult a qualified specialist workshop immediatel y.
% LED light sources: the display message forth e cor responding light appears only when allthe light-emitting
diodes in the light are faulty.
: Malfunction See Owner's
Manual *T
heexterior lighting is malfunctioning. #
Consult a qualified specialist workshop.
* Ve hicles with a trailer hitch: a fuse may haveblown. #
Stop theve hicle in accordance with the tra ffic conditions. #
Check the fuses and replace them if necessary (/ page378).
:
Automatic driving lights
inoperative *T
he light sensor for auto matic driving lights is malfunctioning. #
Consult a qualified specialist workshop. 498
Display messages and warning/indicator lamps

Display messages
Possible causes/consequences and M
MSolutions
: Active Light System inoper-
ative *T
he active headlamp s are malfunctioning. #
Consult a qualified specialist workshop.
: Switch on headlamps *Y
ou are driving without lo w-beam headlamps. #
Turn the light switch totheL orà position.
:
Switch off lights *Y
ou are leaving theve hicle and the lights are still switched on. #
Turn the light switch totheà position.
DIGITAL LIGHT Functions
limited *T
he DIGITAL LIGHT sy stem is malfunctioning. The lighting sy stem will continue towo rkeve n wi thout the functions
of the DIGITAL LIGHT sy stem. #
Consult a qualified specialist workshop.
MULTIBEAM LED Functions
limited *T
he MULTIBEAM LED sy stem is malfunctioning. The lighting sy stem will continue towo rk, but without the functions
of the MULTIBEAM LED sy stem. Display messages and
warning/indicator lamps 499

T
St
anding lights (/ page152)
L Low beam (
/page 152)
K High beam (/
page154)
#! Tu
rn signal lights (/ page154)
R Re
ar fog light (/ page152) Occupan
t safety Wa
rning/indicator lamp
Possible causes/consequences and M
MSolutions
6 Re stra int sy stem warning
lamp *T
he redre stra int sy stem warning lamp is lit while the engine is running.
The restra int sy stem is malfunctioning (/ page41). &
WARNING Risk of inju rydue tomalfunctions in there stra int sy stem
Components in there stra int sy stem may be activated unintentionally or not deploy as intended in an accident. #
Have there stra int sy stem checked and repaired immediately at a qualified specialist workshop. #
Drive on carefully. #
Comply with the messages on the driver displa y. #
Consult a qualified specialist workshop immediatel y. Displ
aymessa ges and warning/indicator lamps 551