2020 MERCEDES-BENZ S-CLASS SALOON LONG lights

#
Save the settings with the memory function
(/ page 131).
% The head restra int height will be adjus ted
automatically when you adjust the seat
height or the seat fore -and-aft position.
% Ve
hicles with EASY ADJUST luxury head
re stra ints: thefo re -and-aft position of the
head restra int will be adjus ted automatically
when you adjust the backrest angle. Ad
justing the front passen ger seat electri‐
cally from the driver's seat Yo
u can call up thefo llowing functions forthe
front passenger sea t:
R Seat adjustment
R Seat heating
R Seat ventilation
R Memory function #
Toselect the front passenger seat: press
button 1.
When the indicator lamp lights up, the front
passenger seat is selected. #
Adjust the front passenger seat using the
buttons on the driver's side door control
panel. 11 0
Seats and stowing

Ad
justing the front passen ger seat electri‐
cally from the rear Ve
hicles with electrically adjus table outer seats
1 Selects the front passenger seat
2 Head restra int height
3 Seat backrest inclination
4 Seat height
5 Seat fore -and-aft position Ve
hicles with an EASY ADJUST luxury head restra int
1 Selects the front passenger seat
2 Head restra int fore -and-aft position
3 Head restra int height
4 Seat backrest inclination
5 Seat height
6 Seat fore -and-aft position #
Adjust there ar seat (/ page111). #
Toselect the front passenger seat: press
button 1.
When the indicator lamp lights up, the front
passenger seat is selected. #
Adjust the front passenger seat using the
buttons on the door operating unit in there ar
passenger compartment.
% You can use there ar-compartment child
saf ety lock todisable this function
(/ page 76). Ad
justing the rear seats electrical ly &
WARNING Risk of inju ryor death due to
incor rect seat position
The seat belt will not of ferth e intended le vel
of pr otection if you ha venot mo vedth e seat
backrest toan almost vertical position.
In particular, you may slip under the seatbelt
and injure yourself. #
Adjust the seat proper lybefore begin‐
ning your journe y. Seats and
stowing 111

1
Selects the front passenger seat
2 Sets the seat fore -and-aft position #
Toselect the front passenger seat: press
button 1.
When the indicator lamp lights up, the front
passenger seat is selected. Setting
thech auf feur position #
Push button 2forw ards and hold it in this
position.
The front passen ger seat will mo veforw ard
and stop at theth re shold of the area for
ch auf feur mode. #
Release button 2. #
Push button 2forw ard and hold it again
until the front passenger seat is in the posi‐
tion forch auf feur mode.
The front passen ger seat head restra int will
fo ld forw ards. The front passenger seat will
mo veforw ard.
% Ifth e front passenger seat is already at the
th re shold tothe area forch auf feur mode,
th e position forch auf feur mode will be set
immediatel y. #
Save the settings with the memory function
(/ page 132).
% You can use there ar-compartment child
saf ety lock todisable this function
(/ page 76). Using
thefo ot re st on the front passenger
seat
Re quirements:
R Depending on the equipment, the front
passenger seat is in one of thefo llowing
positions:
- Vehicles without leg rest:th e front
passenger seat has mo ved into a random
position.
- Vehicles with leg rest:th e front
passenger seat has been mo ved fully
fo rw ard.
R The front passenger seat is in the position for
ch auf feur mode.
Using thefo ot re st
The foot re st is located on the lo wer part of the
front passenger seat backrest. Seats and
stowing 11 5

#
Toselect the front passenger seat: press
button 1.
When the indicator lamp lights up, the front
passenger seat is selected. Fo
lding the head restra int down #
Push button 2forw ards and hold it in this
position.
The head restra int will mo veforw ards slightly
and stop. #
Release button 2. #
Push button 2forw ards again.
The head restra int will fold forw ards. #
Tofold the head restra int into position:
push button 2bac k.
The head restra int will fold into position.
% You can also fold the front passenger head
re stra int into position from the front
passenger seat. Todo so, press any button
on the door operating unit on the front
passenger side.
% Ifth e head restra int is already in thefo re‐
most position, it will fold forw ard immedi‐
atel y.
% You can use there ar-compartment child
saf ety lock todisable this function
(/ page 76). Moving
the front passenger seat into the
normal position (chauf feur mode) Seats and
stowing 117

#
Toselect the front passenger seat: press
button 1.
When the indicator lamp lights up, the front
passenger seat is selected.
Setting the normal position #
Push button 3towa rdsth ere ar and hold it
in this position.
The front passen ger seat will mo vetothe
th re shold of the area forch auf feur mode. The head
restra int on the front passenger
side will be mo ved into the upright position.
The front passenger seat will then mo vefur‐
th er towa rdsth ere ar.
or #
Brief lypush button 2towa rdsth ere ar.
The front passenger seat will mo veautomati‐
cally totheth re shold of the area forch auf‐
fe ur mode. The head restra int on the front
passenger side will be mo ved into the upright
position.
% You can also set the normal position from
th e front passenger seat. Todo so, press any
button on the door operating unit on the
front passenger side. #
Call up the settings with the memory func‐
tion (/ page132).
% You can use there ar-compartment child
saf ety lock todisable this function
(/ page 76). Head
restra ints Ad
justing the front seat luxury head
re stra ints mechanically &
WARNING Risk of inju ryifve hicle set‐
tings are adjus ted while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in par‐
ticular in thefo llowing situations:
R Ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion.
R Ifyo ufast enyour seat belt while theve hi‐
cle is in motion. #
Before starting the engine: adjust the
driver's seat, head restra ints, steering
wheel and mir ror in particular and fas‐
te nyo ur seat belt. 11 8
Seats and stowing

1
Tomo veup
2 Tomo veback
3 Tomo vedown
4 Tomo veforw ard #
Save the settings with the memory function
(/ page 131). Swi
tching the steering wheel heater on/off Re
quirements:
R The po wer supply or the ignition is switched
on. #
Push the switch into position 1or2.
If indicator lamp 3lights up, thesteering
wheel heater is switched on. When
you swit ch the ignition off, thesteering
wheel heater will switch off. Coupling
thest eering wheel heater tothe
seat heating Re
quirements:
R The po wer supply or the ignition is switched
on.
Multimedia sy stem:
4 © 5
Comfort 5
Seat
5 Heating settings #
Tap on Additional steering wheel heater .
The steering wheel heater will be coupled to
th e seat heating.
When the function has been activated, thesteer‐
ing wheel heater is automatically activated and
deactivated when you swit ch the switch the seat
heating on and off. 12 8
Seats and stowing

Yo
u can sa vethefo llowing settings forth ere ar
seat:
R Position of the seat, backrest and head
re stra int
R Vehicles with active multicontour seats:
th e seat side bols ters of the seat backrest as
we ll as the conto ur ofthe seat backrest in
th e lumbar region
R Seat heating: distribution of the heated sec‐
tions of the seat cushion and seat backrest
Operating the front passenger seat and rear
seat
Fr ont passenger seat adjustments and rear seat
adjustments for up tothre e people can be
st ored and called up using the memory function
in there ar compartment.
Yo u can sa vethefo llowing settings forth e front
passenger seat:
R Position of the seat, backrest and head
re stra int Yo
u can sa vethefo llowing settings forth ere ar
seat:
R Position of the seat, backrest and head
re stra int
R Vehicles with active multicontour seats:
th e seat side bols ters of the seat backrest as
we ll as the conto ur ofthe seat backrest in
th e lumbar region
R Seat heating: distribution of the heated sec‐
tions of the seat cushion and seat backrest
The following settings are also stored toa mem‐
ory position, if the indicator lamp in thev
button lights up:
R Position of thefo ot re st of the front
passenger seat, if available
R Position of the screen, if available
Using the preset position buttons, you alw ays
st ore the cur rent setting of ea chseat. Operating
there ar seat via the memory func‐
tion in there ar passenger comp artment St
oring #
Press button 1.
The rear seat is selec ted if the indicator lamp
in the button does not light up. #
Adjust there ar seat using the buttons in the
door control panel (/ page111). 13 2
Seats and stowing

Example:
vehicles without a reclining rear seat #
Press theV button and then release it.
Calling up #
Press button 1.
The rear seat is selec ted if the indicator lamp
in the button does not light up. Operating
the front passenger seat and rear
seats via the memory function in there ar
comp artment St
oring #
Press button 1.
The rear seat is selec ted if the indicator lamp
in the button does not light up. #
Adjust there ar seat using the buttons in the
door control panel (/ page111). #
Press button 1.
When the indicator lamp lights up, the front
passenger seat is selected. #
Adjust the front passenger seat using the
buttons on the door control panel in there ar
passenger compartment (/ page107). #
Ensure that the indicator lamp in button 1
lights up. Seats and
stowing 13 3