If
it is absol utely necessary tocarry achild on
the front passe ngerseat, besure toobserve
the information onthe "Occupa ntCla ssifica -
tion System (OCS)"(Ypage 47).There youwill
also findinformation ondisa bling thefront
passe ngerfront airbag.
All child restraint systemsmustmeet thefol-
lowi ngstandards:
R U.S. Federal MotorVehicle SafetyStandards
213 and225
R Cana dianMotor Vehicle SafetyStandards
213 and210.2
Confirma tionthat thechild restraint system
corresponds tothe standards canbefound on
an instruction labelon the child restraint sys-
tem. Thisconfirmation canalso befound in
the installa tioninstructions thatareinclude d
with thechild restraint system.
Observe thewarning labels inthe vehicle inte-
rior and onthe child restraint system. LATC
H-type (ISOFI X)chil dseat
sec uring system G
WARNING
For LATCH-type (ISOFIX)childrestraint sys-
tems inwhich thechild issecured usingthe
safety beltintegrated inthe child restraint
system, themaximum permissibleweig htof
the child andchild restraint systemtogether
is 73 lbs (33 kg).
If the child andthechild restraint system
together weighmore than73lbs (33 kg),the
LATCH-type (ISOFIX)childrestraint system
with integrated safetybeltnolonger offers
sufficie ntprotection. TheLATCH-type (ISO-
FIX) child seatsecuring systemmaybeover-
load ed,and thechild maynotberestrained
in an accident, forexample .This poses an
increased riskofinjury oreven fatalinjury.
If the child andthechild restraint system
together weighmore than73lbs (33 kg),
use only aLATCH-type (ISOFIX)child
restraint systeminwhich thechild isalso
secured withthevehicle seatbelt. Also
secure thechild restraint systemwiththe
Top Tether belt,ifavai lable. Regu
larlycheck thatthepermissi blegross
weig htofthe child together withthechild
restraint systemisstill maintained .
Alway scomply withthemanufacture r'sinstal-
lation andopera tinginstructions forthe child
restraint systemused.
Before everytrip,make surethattheLATCH-
type (ISOFIX) childrestraint systemisengaged
correctly inboth LATCH-type (ISOFIX)securing
rings
! When
installi ngthe child restraint system,
make surethattheseat beltforthe middl e
seat does notgettrapped .The seat belt
could otherwise bedama ged. X
Install theLATCH-type (ISOFIX)child
restraint systemonboth LATCH-type (ISO-
FIX) securing rings0043.
ISOFIX isastandardi zedsecuring systemfor
specia llydesig nedchild restraint systemson
the rear seats. LATCH-type (ISOFIX)securing
rings fortwo LATCH-type (ISOFIX)child
restraint systemsareinstalle don the left and
right ofthe rear seats.
Non-LATCH-type (ISOFIX)childseats mayalso
be used andcanbeinstalle dusing thevehi-
cle's seatbeltsystem. Installthechild seat
according tothe manufacture r'sinstructions. Top
Tether
Introductio n Top
Tether provide san addi tional connection
betwee nthe child restraint systemsecured
with aLATCH-type (ISOFIX)systemandthe
vehicle .This helps reduce therisk ofinjury
even further. Ifthe child restraint systemis
equi pped withaTop Tether belt,thisshoul d
alw ays beused . 56
Chil
dren inthe vehic leSafety
