2020 MAZDA MODEL 6 warning

[x] Cancel search: warning

Page 542 of 702

MAZDA MODEL 6 2020  Owners Manual (in English) 3. If any fuse but the MAIN fuse isblown, replace it  with a new one of the
same amperage rating .
NormalBlown
WARNING
Do not replace the main fuse by
yourself. Have an Authorized Mazda
Dealer perform

Page 544 of 702

MAZDA MODEL 6 2020  Owners Manual (in English) DESCRIPTIONFUSE
RATING PROTECTED COMPONENT
36 WIPER.DEI 20A Windsh ield wiper de-icer
37 ENG.+B 7.5 A Engine control system
38 H/L LOW L 15 A Headlight low beam (LH)
39 GLOW SIG 5 A ―
40 ENGINE1
ENG

Page 548 of 702

MAZDA MODEL 6 2020  Owners Manual (in English) Wa t e r   M a r k s
Occurrence
Rain, fog, dew, and even tap water can
contain harmful minerals such as salt and
lime. If moisture containing these minerals
settles on the vehicle and evaporates, the

Page 557 of 702

MAZDA MODEL 6 2020  Owners Manual (in English) 7If Trouble Arises
Helpful information on what to do if a problem arises with the vehicle.
Parking in an Emergency................. 7-2 Parking in an Emergency..............7-2
Flat Tire..............

Page 558 of 702

MAZDA MODEL 6 2020  Owners Manual (in English) Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
 
The hazard warning lights warn other
drivers that your vehicle is a traffi

Page 563 of 702

MAZDA MODEL 6 2020  Owners Manual (in English) Changing a Flat Tire
NOTE
If the following occurs while driving, it
could indicate a flat tire.
Steering becomes difficult.
The vehicle begins to vibrate
excessively.
The vehicle pulls in one

Page 566 of 702

MAZDA MODEL 6 2020  Owners Manual (in English) 6. Insert the jack lever and attach the lugwrench to tire jack.
 
7. Turn the jack handle clockwise andraise the vehicle high enough so that
the spare tire can be installed. Before
removing the lug nu

Page 568 of 702

MAZDA MODEL 6 2020  Owners Manual (in English) ▼Mounting the Spare Tire
1. Remove dirt and grime from the
mounting surfaces of the wheel and
hub, including the hub bolts, with a
cloth.
 
WARNING
Make sure the mounting surfaces of the
wheel, hub