2020 MAZDA MODEL 3 HATCHBACK spare tire

[x] Cancel search: spare tire

Page 466 of 598

MAZDA MODEL 3 HATCHBACK 2020  Owners Manual (in English) The temporary spare tire has a tread life
of less than 5,000 km (3,000 miles). The
tread life may be shorter depending on
driving conditions.
 The temporary spare tire is for limited
use, howeve

Page 485 of 598

MAZDA MODEL 3 HATCHBACK 2020  Owners Manual (in English) 7If Trouble Arises
Helpful information on what to do if a problem arises with the vehicle.
Parking in an Emergency................. 7-2 Parking in an Emergency..............7-2
Flat Tire..............

Page 487 of 598

MAZDA MODEL 3 HATCHBACK 2020  Owners Manual (in English) Spare Tire and ToolStorage
▼Spare Tire and Tool Storage
Spare tire and tools are stored in the
locations illustrated in the diagram.
4–Door
1. Tiedown eyelet*
2. Spare tire hold-down bolt
3. Jack

Page 489 of 598

MAZDA MODEL 3 HATCHBACK 2020  Owners Manual (in English) 5–Door
Perform the removal procedure in reverse.
Maintenance
Always keep the jack clean.
Make sure the moving parts are kept
free from dirt or rust.
Make sure the screw thread is
adequately

Page 490 of 598

MAZDA MODEL 3 HATCHBACK 2020  Owners Manual (in English) 2. Turn the spare tire hold-down boltcounterclockwise and remove the spare
tire.
 
1. Spare tire hold-down bolt  
NOTE
If the spare tire hold-down bolt cannot
be loosened, hold the edge of the tire
an

Page 491 of 598

MAZDA MODEL 3 HATCHBACK 2020  Owners Manual (in English) (Vehicles without sub-woofer)
Turn the spare tire hold-down bolt
counterclockwise and remove the spare
tire.
 
1. Spare tire hold-down bolt 
NOTE
If the spare tire hold-down bolt cannot
be loosened, h

Page 492 of 598

MAZDA MODEL 3 HATCHBACK 2020  Owners Manual (in English) 1. Park on a hard, level surface off theright-of-way and firmly set the parking
brake.
2. Put a vehicle with an automatic transmission in Park (P), a manual
transmission in Reverse (R) or 1, and
turn

Page 495 of 598

MAZDA MODEL 3 HATCHBACK 2020  Owners Manual (in English) NOTE
When raising the jack head into the
jacking position and aligning the
groove in the jack head with the rail
under the vehicle body, the top of the
jack head contacts the vehicles
underbody witho
Page:   < prev 1-8 9-16 17-24 25-32 33-40 next >