2020 KIA CADENZA display
[x] Cancel search: displayPage 204 of 243
9-34
SW Info/Update
You can see the versions of system components. You can also
update the system to the latest version.
Perform any of the following methods:
000eSetting in the General screen: On the All Menus screen, touch
Setup >
General >
SW Info/Update.
000eSetting in the System Info screen: On the All Menus screen,
touch Setup >
General >
System Info >
SW Info/Update.
The SW Info/Update screen appears.
Type A
Screen Saver
You can select the items to display on the screen saver in standby
mode.
Digital Clock
Displays the digital clock on the system screen saver.
Analog Clock
Displays the analog clock on the system screen saver.
None
Displays nothing on the system screen saver.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140015> ß
1 ß
1
Page 206 of 243
9-36
Storage
You can check the storage space of the system memory where
voice memos can be saved.
User's Manual on Web (QR Code)
You can access the online user’s manual of the system by
scanning the QR code with your smartphone.
Reset
You can initialize all system settings including general settings
and navigation settings.
ÜÜCaution
000eWhen initialization is performed, all user data in the system
including the location data is deleted.
000eWhen phone projection is active, you cannot reset the system
settings. To reset the settings, remove the USB cable from
your system.
Confi guring the display
settings
You can change the system display settings such as display
brightness.
1 On the All Menus screen, touch Setup >
Display.
The display settings screen appears.
2 Confi gure the settings required:
Mode
You can set the system to automatically adjust the display
brightness depending on the ambient light intensity. You can also
set the system to keep the display bright or dark all the time.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140017> ß
1 ß
1
Page 207 of 243
9-37
Automatic
The display brightness is automatically adjusted based on the
surrounding environment.
Daylight
It can be activated when Automatic is turned off . It keeps the
display always bright regardless of the surrounding environment.
Night
It can be activated when Automatic is turned off . It keeps the
display always dark regardless of the surrounding environment.
Illumination
You can set the system to automatically adjust the display
brightness depending on the cluster illumination. You can also
set the level of display brightness to use while using the daytime
or night mode.
Link to Cluster Illumination Control
The display brightness is automatically adjusted based on the
cluster illumination.
Daylight
You can set the display brightness when Daylight is selected
under Mode. Uncheck Link to Cluster Illumination Control and
then set to the desired brightness.
Night
You can set the display brightness when Night is selected under
Mode. Uncheck Link to Cluster Illumination Control and then
set to the desired brightness.
Blue Light Filter
Enable blue light fi ltering to adjust the screen light to reduce the
level of eye strain.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140018> ß
1 ß
1
Page 208 of 243
9-38
Confi guring the media settings
Set to receive a notifi cation when the information changes during
playback or to include sub-folders when playing a folder on
repeat.
1 On the All Menus screen, touch Setup >
Media.
The media settings screen appears.
2 Confi gure the settings required:
Media Change Notifi cations
You can set to briefl y display media information at the top of
screen while playing the next item when you move from the
media player screen to another.
Use Blue Light Filter
Enable or disable blue light fi ltering.
Blue Light Filter Settings
Set to activate blue light fi ltering automatically based on the
ambient light or pick the time range manually.
000eAutomatic: Enable blue light fi ltering based on the ambient
light.
000eScheduled Time: Enable blue light fi ltering during the set
time range.
Reset
You can initialize all display settings such as brightness.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140019> ß
1 ß
1
Page 212 of 243
10-2
Solutions
Before reporting a malfunctioning system, refer to the following table and see if you can identify and fi x the problem. If the problem persists
or you are unable to locate your specifi c need, contact your place of purchase or dealer.
Sound and display
Symptom Possible cause Solution
A blank screen appears and
sound is not audible.The system is turned off .
000eCheck that the start switch is in “ACC” or “ON.”
000ePress the Power button on the control panel to turn on the
system.
Sound volume is too low. Turn the Volume knob on the control panel to adjust the volume.
Sound is muted. Press the Mute button on the steering wheel to unmute.
Sound is audible from only one
side of the speakers.Sound is imbalanced. On the All Menus screen, touch Setup >
Sound >
Position
and adjust the sound outputs for the left and right speakers.
> See “Position.”
The sound is cut off or noise is
heard.Vibration occurs in the system. When the system vibrates, the sound may be cut off or noise may
occur. This is not a system failure. The system is restored as soon as
the vibration stops.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e0013> ß
1 ß
1
Page 213 of 243
10-3
Symptom Possible cause Solution
The image quality is poor. Screen adjustment is required. On the All Menus screen, touch Setup >
Display >
Illumination,
and then adjust the brightness.
> See “Illumination.”
Vibration occurs in the system. The images may get distorted when vibration occurs in the system.
This is not a system failure. The system is restored as soon as the
vibration stops.
The display is aged or the system
performance is degraded.If the problem persists, contact your place of purchase or dealer.
Small red, blue, and green dots
are shown on the screen.LCD has very high-density pixels. For this reason, there may be dead
pixels (that are always off ) or lit pixels (that are always on) within 0.01
percent of the total pixels.
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e0014> ß
1 ß
1
Page 221 of 243
10-11
Bluetooth
QWhich functions can I use via Bluetooth?
AYou can use the hands-free call function with a mobile
phone connected. You can also play music after
connecting an audio device such as MP3 player or mobile
phone.
> See “Making a call via Bluetooth.“, “Listening to music
via Bluetooth.”
QHow can I register a Bluetooth device?
AOn the All Menus screen, touch Setup >
Device
Connections >
Bluetooth >
Bluetooth Connections >
Add New. From the Bluetooth device to be connected,
search for the vehicle system and register it. Use the
Bluetooth device to enter or approve the authentication
number displayed on the system. Then the device is
added to the list of Bluetooth devices in the system and
automatically connected to the system.
> See “Connecting
a Bluetooth device.”
FAQ
Navigation
QHow can I update the map?
AYou can download the latest map data to a USB device
and use the device to update the map.
> See “Updating the
system software and map.”
QGuidance is made by bypassing the route or the speed
camera alerts are late.
ASelect another route after setting the route options.
On the map screen, touch Menu >
Route >
Route
Options to change the settings and resume navigation.
> See “Changing the route search criteria.”
When the system is not updated, update the software
and map and then perform search again.
> See “Updating
the system software and map.”
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e00120012> ß
1 ß
1
Page 230 of 243
10-20
Index
A
Advanced system settings 9-13
Android devices
Android Auto 2-4
Apple devices
Apple CarPlay 2-6
B
Battery warning 1-6
Bluetooth
Bluetooth phone
Answering a call 6-15
Call 6-7
Contacts list 6-11
Dial pad 6-13
Favorites settings 6-9
Options during a call 6-16
Recent calls list 6-7
Switching to another call 6-17
Text message 6-18
Specifi cations 10-16
Bluetooth connection
Adding a device 6-3
Deleting a device 6-6
Device connection 6-4
Disconnecting a device 6-6
C
Climate
Climate control system 2-13
Component Names and Functions
Control panel
Custom button 1-2
MAP button 1-2
MEDIA button 1-2
NAV button 1-2
POWER button/VOLUME knob 1-2
RADIO button 1-2
SEEK/TRACK button 1-2
SETUP button 1-2
System Reset button 1-3
TUNE knob/FILE knob/ENTER
button 1-3
Steering wheel remote control
Call button 1-4
End Call button 1-4
MODE button 1-3
Move button 1-4
Voice Recognition button 1-3
Volume lever/Mute button 1-3
Contacts list 6-11
Control panel 1-2
D
Date and time settings 9-29
Deleting a location 5-26
Destination search 5-3
Driving assist display 2-8
, @ / " ' , @ : ( 1 & @ ( 8 * % & < 6 4 " @ & 6 > " 7 / 5 @ ' . 4 $ # @ J O E C <002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e00130011> ß
1 ß
1