31
DON’T SPIN YOUR TIRES 
EXCESSIVELY 
Avoid excessive tire spinning when your 
vehicle is stuck in snow, ice, mud or sand. The 
centrifugal forces generated by a free-spinning 
tire/wheel assembly may cause sudden tire 
explosion resulting in vehicle damage and/or 
serious personal injury to you or a bystander. 
Never exceed 35 mph/55 km/h, as indicated 
on your speedometer. Use a gentle backward 
and forward rocking motion to free your 
vehicle for continued driving. Never stand near 
or behind a tire spinning at high speeds. For 
example, while attempting to push a vehicle 
that is stuck or when an on-the-car spin 
balance machine is in use.
DO CHECK YOUR TIRES FOR 
WEAR
Always remove tires from service when 
they reach two thirty-seconds of an inch 
(2/32) remaining tread depth. All new tires 
have treadwear indicators which appear as 
smooth banks in the tread grooves when they 
wear to the two thirty-seconds of an inch 
(2/32) level. Many wet weather accidents 
result from skidding on bald or nearly bald 
tires. Excessively worn tires are also more 
susceptible to penetrations. 
DO CHECK YOUR TIRES FOR 
DAMAGE 
Frequent (at least monthly) inspection of your 
tires for signs of damage and their general 
condition is important for safety. If you have any questions, have your tire Dealer inspect 
them. Impacts, penetrations, cracks, knots, 
bulges or air loss always require tire removal 
and expert inspection. Never perform a 
temporary repair or use an inner tube as a 
substitute for a proper repair. Only qualified 
persons should repair tires.
PROPER TIRE REPAIR NOTE: 
Goodyear and Dunlop do not warrant any 
inspection or repair process. The repair is 
entirely the responsibility of the repairer and 
should be made in accordance with established 
Rubber Manufacturers Association (RMA) 
procedures. 
TIRE PRESSURE MONITORING 
SYSTEM ALERT
Refer to your vehicle Owner’s Manual for more 
information on what to do if the tire pressure 
warning system activates.
THE CONVENIENCE 
(TEMPORARY) SPARE
The Convenience (Temporary) Spare is 
designed, built, and tested to the high 
engineering standards set by North America’s 
leading car manufacturers and to Goodyear 
and Dunlop’s own high standards of quality 
control. It is designed to take up a minimum 
of storage space and, at the same time, fulfill 
the function of a spare tire when needed. The 
spare is kept in its storage space, fully inflated 
at 60 psi. To be sure it is always ready for use, 
the air pressure should be checked on a regular 
basis. The Convenience (Temporary) Spare can be 
used in combination with the original tires 
on your vehicle. You can expect a tire tread 
life of up to 3,000 miles (4,800 kilometers), 
depending on road conditions and your driving 
habits. To conserve tire tread life, return the 
spare to the storage area as soon as it is 
convenient to have the standard tire repaired 
or replaced. 
The Convenience (Temporary) Spare weighs 
less than a standard tire so it’s easier to handle. 
It also helps reduce the total car weight which 
contributes to fuel economy. 
The wheels used with the Convenience 
(Temporary) Spare are specifically designed for 
use with high pressure spares and should never 
be used with any other type tire.
DON’T ATTEMPT TO MOUNT YOUR 
OWN TIRES 
Serious injury or Death may result from 
explosion of tire/rim assembly due to improper 
mounting procedures. Follow tire manufacturer’s 
instructions and match tire diameter to rim 
diameter. Mount light truck radials on rims 
approved for radial service. Do not apply bead 
sealer. This can inhibit bead seating. Lubricate 
beads and tire rim (including tube or flap) 
contact surfaces. Lock assembly on mounting 
machine or place in safety cage. STAND BACK 
and never exceed 40 psi to seat beads. Never 
use a volatile substance or a rubber “donut” (also 
known as a bead expander or “O-Ring”) to aid 
bead seating. Only specially-trained persons 
should mount tires.
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY
(Continued on next page)