2020 HONDA ACCORD SEDAN service

[x] Cancel search: service

Page 617 of 728

HONDA ACCORD SEDAN 2020  Owners Manual (in English) 615
uuMaintenance MinderTMuTo Use Maintenance MinderTM
Continued
Maintenance
■Maintenance Service Items1Maintenance Service Items
•Adjust the valves during services A, B, 1, 2, or 3 if 
they are n

Page 618 of 728

HONDA ACCORD SEDAN 2020  Owners Manual (in English) 616
uuMaintenance MinderTMuTo Use Maintenance MinderTM
Maintenance
1Maintenance Service Items
•Adjust the valves during services A, 0, 9, 1, 2, or 3 
if they are noisy.
Canadian models
*1: If a Main

Page 619 of 728

HONDA ACCORD SEDAN 2020  Owners Manual (in English) 617
uuMaintenance MinderTMuTo Use Maintenance MinderTM
Maintenance
Reset the maintenance minder information display if you have performed the 
maintenance service.
1. Set the power mode to ON.
2. Pres

Page 651 of 728

HONDA ACCORD SEDAN 2020  Owners Manual (in English) 649
uuChecking and Maintaining Tires uDOT Tire Quality Grading (U.S. Vehicles)
Continued
Maintenance
DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle m eet all U.S. Federal Safety 
R

Page 653 of 728

HONDA ACCORD SEDAN 2020  Owners Manual (in English) 651
uuChecking and Maintaining Tires uWear Indicators
Maintenance
Wear Indicators
The groove where the wear indicator is 
located is 1/16 inch (1.6 mm) shallower than 
elsewhere on the tire. If  the t

Page 660 of 728

HONDA ACCORD SEDAN 2020  Owners Manual (in English) 658
Maintenance
Climate Control System Maintenance
Air Conditioning
To ensure proper and safe operation, th e Society of Automotive Engineers (SAE 
J2845) recommends that the refrigerant  system only

Page 671 of 728

HONDA ACCORD SEDAN 2020  Owners Manual (in English) 669Continued
Handling the Unexpected
If a Tire Goes Flat
Changing a Flat Tire
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually 
to reduce speed. Then, stop in a

Page 682 of 728

HONDA ACCORD SEDAN 2020  Owners Manual (in English) uuJump Starting uJump Starting Procedure
680
Handling the Unexpected
Once your vehicle’s engine has started, re move the jumper cables in the following 
order.
1. Disconnect the jumper cable from yo