2020 CITROEN C4 parking brake

162
Practical information
Changing to free-wheeling
In certain situations, it is necessary to put the
vehicle into free-wheeling mode (e.g. towing, on
a rolling road, automatic car wash (Wash mode),
rail or sea transport).
The procedure varies according to the type of
gearbox and parking brake.
Never leave the vehicle unattended with
the vehicle into free-wheeling mode.
Keyless Entry and Start
You must not depress the brake pedal
while switching the ignition on again, then
switching it off. If you do, the engine will start,
requiring you to restart the procedure.
/
Release procedure
► With the vehicle stationary and the engine
running, depress the brake pedal and select
mode
N.
Within 5
seconds:
►

Depress and hold the brake pedal, then
observe this order: switch off the engine and
move the push selector forwards or backwards.
►


Release the brake pedal, then switch on the
ignition.
►


Place your foot on the brake and press the
electric parking brake control to release it.
► Release the brake pedal, then switch off the
ignition.
A message is displayed on the instrument panel to confirm the unlocking
of the wheels for 15
minutes.
After 15 minutes or reverting to normal
operation
► While depressing the brake pedal, restart the
engine and select mode P .
Advice on care and maintenance
General recommendations
Observe the following recommendations to avoid
damaging the vehicle.
Exterior
Never use a high-pressure jet wash in
the engine compartment - risk of
damaging the electrical components!
Do not wash the vehicle in bright sunshine or
extremely cold conditions.
When washing the vehicle in an
automatic roller-brush car wash, be sure
to lock the doors and, depending on version,
move the electronic key away.
When using a pressure washer, keep the jet
nozzle at a minimum distance of 30 cm from
the vehicle (particularly when cleaning areas
containing chipped paint, sensors or seals).
Promptly clean up any stains containing
chemicals liable to damage the vehicle's
paintwork (including tree resin, bird
droppings, insect secretions, pollen and tar).
Depending on the environment, clean the
vehicle frequently to remove salty deposits
(in coastal areas), soot (in industrial areas)
and mud/salts (in wet or cold areas). These
substances can be highly corrosive.
Contact a CITROËN dealer or a qualified
workshop for advice on removing stubborn
stains requiring special products (such as tar
or insect removers).
Preferably, have paint touch-ups performed
by a CITROËN dealer or a qualified
workshop.
Interior
When washing the vehicle, never use a
water hose or high-pressure jet to clean
the interior.
Liquids carried in cups or other open
containers can spill, presenting a risk of
damage to the instruments and controls and
the controls located on the centre console. Be
vigilant!

167
In the event of a breakdown
8Tyre inflation pressures are indicated on this label.
For more information on Identification
markings, particularly this label, refer to the
corresponding section.
Should the pressure of one or more tyres
be adjusted, it is necessary to reinitialise
the under-inflation detection system.
For more information on Tyre under-inflation
detection, refer to the corresponding section.
Repair procedure
Do not remove any foreign body
(e.g. nail, screw) which has penetrated
the tyre.
►

Park the vehicle without obstructing traffic
and apply the parking brake.
►


Follow the safety instructions (hazard
warning lamps, warning triangle, high visibility
jacket, etc.) according to the legislation in force
in the country in which you are driving.
►


Switch the ignition off.
►


Uncoil
the pipe stowed under the compressor.


► Connect the pipe from the compressor to the
bottle of sealant.


► Turn the bottle of sealant over and secure it
in the notch provided on the compressor.
►

Remove the valve cap from the tyre to be
repaired, and place it in a clean place.


► Connect the hose from the bottle of sealant
to the valve of the tyre to be repaired and tighten
firmly
.
►

Check that the compressor switch is in
position

"O".
►

Fully uncoil the electric cable stowed under
the compressor

.
►

Connect the compressor's electric plug to the
vehicle's 12

V socket.
► Affix the speed limit sticker .
The speed limit sticker must be affixed
inside the vehicle in the area close to the
driver, to remind them that a wheel is in
temporary use.
►

Switch the ignition on.

169
In the event of a breakdown
8Spare wheel
Scan the QR Code on page 3 to view
explanatory videos.
For more information on the Tool kit,
refer to the corresponding section.
Accessing the spare wheel

The spare wheel is stored in the boot, under the
floor.
To access the spare wheel, first refer to the
Tool
kit
section.
Depending on version, the spare wheel
may be a standard (steel or aluminium)
or 'space-saver' wheel.
Removing the spare wheel

► Slacken the central nut.
► Remove the fastening device (nut and bolt).
►

Lift the spare wheel towards you from the
rear

.
►

T
ake the wheel out of the boot.
Putting the spare wheel back in place
The punctured wheel cannot be put under the boot floor.


► Put the spare wheel back in place in its
housing.
►

Slacken the nut on the bolt by a few turns.
►


Position the fastening device (nut and bolt) in
the middle of the wheel.
►


T
ighten the central nut sufficiently to retain
the wheel correctly.
►

Depending on version, put the tool box back
in place

in the middle of the wheel and clip it in
place.
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does
not obstruct traffic: the ground must be level,
stable and non-slippery.
With a manual gearbox, engage first gear
to lock the wheels, apply the parking brake,
unless it is set to automatic mode, and switch
off the ignition.
With an automatic gearbox, select mode

P

to lock the wheels, apply the parking brake,
unless it is set to automatic mode, and switch
off the ignition.
Check that the parking brake indicator lamps
on the instrument panel are on fixed.
The occupants must get out of the vehicle
and wait where they are safe.
If necessary, place a chock under the wheel
diagonally opposite the wheel to be changed.
Never go underneath a vehicle raised using a
jack; use an axle stand.

178
In the event of a breakdown
Reconnecting the (+) terminal

► Raise lever A fully.
► Refit open clamp B on the (+) terminal.
►

Push clamp
B fully down.
►

Lower lever

A
to lock clamp B.
►

Depending on equipment, lower the plastic
cover on the

(+) terminal.
Do not force the lever when pressing on
it, as if the clamp is not positioned
correctly, locking will then not be possible.
Start the procedure again.
Following reconnection
After reconnecting the battery, turn on the
ignition and wait 1 minute before starting the
engine, to enable the electronic systems to
initialise.
If minor problems nevertheless persist following
this operation, contact a CITROËN dealer or a
qualified workshop.
Referring to the relevant section, reinitialise
certain equipment:
–

Remote control key or electronic key
(depending on version).
–

Sunroof.
–

Electric windows.
–


Date and time.
–


Preset radio stations.
The Stop & Start system may not be operational during the trip following the
first engine start.
In this case, the system will only be available
again after a continuous period with the
vehicle immobilised, the duration of which
depends on the exterior temperature and the
state of charge of the battery (up to about 8
hours).
Towing the vehicle
General recommendations
Observe the legislation in force in the
country where you are driving.
Ensure that the weight of the towing vehicle is
higher than that of the towed vehicle.
The driver must remain at the wheel of the
towed vehicle and must have a valid driving
licence.
When towing a vehicle with all four wheels on
the ground, always use an approved towing
arm; rope and straps are prohibited.
The towing vehicle must move off gently.
When the vehicle is towed with its engine
off, there is no longer braking and steering
assistance.
A professional towing service must be
called if:
–

Broken down on a motorway or main road.
–


Not possible to put
the gearbox into neutral,
unlock the steering, or release the parking
brake.
–

Not possible to tow a vehicle with an
automatic gearbox, with the engine running.
–


T

owing with only two wheels on the ground.
–

Four-wheel drive vehicle.
–


No approved towbar available.
Before towing the vehicle, it is essential
to put the vehicle in free-wheeling mode.
For more information on Free-wheeling, refer
to the corresponding section.
Electric motor
An electric vehicle cannot under any
circumstances be used to tow another
vehicle.
However, it may be used, for example, to exit
a rut.

179
In the event of a breakdown
8Towing constraints
Type of vehicle
(engine/gearbox) Front wheels on the
ground Rear wheels on the
ground Flatbed
4 wheels on the ground
with towbar
Internal combustion/Manual


Internal combustion/Automatic

Electric

In case of battery or electric parking brake failure, it is essential to call a p
rofessional using flatbed recovery vehicles (excluding manual gearbox).
Accessing the tools
The towing eye is stored with the tool kit in the
boot.
For more information on accessing the Tool kit,
refer to the corresponding section.
Towing your vehicle
To access the front screw thread:

► Unclip the cover by pressing on its left-hand
section.
►

Release the cover downwards.
T

o be towed:
► Screw the towing eye in fully .
► Install the towbar .
►

Put the gearbox into neutral.
Failure to observe this instruction could
result in damage to certain components
(braking, transmission, etc.) and to the
absence of braking assistance the next time
the engine is started.
Automatic gearbox
Never tow the vehicle with the driving
wheels on the ground and the engine off.
►

Unlock the steering and release the parking
brake.

240
Alphabetical index
Instrument panel, LCD 9
Internet browser
218, 221
ISOFIX mountings

78, 81–82
J
Jack 165–166, 169, 224
Jump starting
176
K
Key 28–29, 32–33
Key, electronic
30–31
Keyless Entry and Starting

28, 30–31, 87–88
Key not recognised

88–89
Key with remote control

28, 86
Kit, hands-free

201–202, 226
Kit, puncture repair

166
Kit, temporary puncture repair

165–168
L
Labels, identification 185
Lamp, boot
56
Lamps, parking

58
Lamps, rear

174
Lams with Full LED technology

61
Lane assist

109, 113–115
Lane departure warning active

11 8
Leather (care) 163
LEDs - Light-emitting diodes
58, 172, 174
Level, AdBlue®

158
Level, brake fluid

157
Level, Diesel additive

158
Level, engine coolant

19, 157
Level, engine oil

19, 156
Levels and checks

155–157
Level, screenwash fluid

63, 157
Light-emitting diodes - LEDs

58, 172, 174
Lighting, cornering

61
Lighting dimmer

23
Lighting, exterior

57, 60
Lighting, guide-me home

29, 59–60
Lighting, interior

55
Lighting, mood

55
Lighting, welcome

59
Loading

152–153
Load reduction mode

154
Locking

29, 31
Locking from the inside

32
Locking the doors

32
Low fuel level

137
Lumbar

41
M
Mains socket (domestic network) 141
Maintenance (advice)
139, 162
Maintenance, routine

102, 158–160
Manoeuvring aids (recommendations)

101
Map reading lamps 55
Markings, identification
185
Massage function

41
Mat

54, 102
Menu, main

26
Menus (audio)

197–198, 210–211
Menu short cuts

26
Messages

228
Messages, quick

228
Minimum traction battery charge
level (Electric)

21
Mirror, rear view

43
Mirrors, door

43, 51, 121
Mirror, vanity

52
Misfuel prevention

138
Mobile application

27, 51, 148
Motor, electric

89, 156, 184
Mountings, ISOFIX

78, 81–82
Multimedia support

52
N
Navigation 215–217
Navigation, connected
218–220
O
Obstacle detection 126
Oil change
156
Oil consumption

156

241
Alphabetical index
OIl, engine 156
On-board tools
56, 165–166
Opening the bonnet

154
Opening the boot

30, 35
Opening the doors

30, 35
Opening the windows

28
P
Pads, brake 159
Paint
163, 185
Paint colour code

185
Park Assist

132
Parking brake

89, 159
Parking brake, electric

90–92, 159
Parking sensors, audible and visual

126
Parking sensors, front

127
Parking sensors, rear

126
Passenger compartment temperature pre-
conditioning (Electric)

27, 51
Pedestrian horn (Electric)

67, 85
Personalisation

10
Plates, identification

185
Player, Apple®

200, 225
Player, USB

200, 224
Port, USB

52, 200, 203, 220, 224
Post Collision Safety Brake

70
Power

21
Power indicator (Electric)

8, 21
Pressures, tyres

159, 167, 185
Pre-tensioning seat belts

72
Priming the fuel system 165
Profiles
229
Protecting children

74–80
Proximity Keyless Entry & Start

30
Public fast charging station

141, 147
Puncture

166–167, 169
R
Radar (warnings) 101
Radio
198, 223
Radio, digital (Digital Audio
Broadcasting - DAB)

199–200, 224
Range, AdBlue®

20, 158
RDS

199, 223
Reading lamps

55
Rear screen, demisting

51
Recharging the battery

175–176
Recharging the traction battery
(Electric)

138, 142, 145, 147–148
Recirculation, air

50
Recovery

178–180
Recovery of the vehicle

178–179
Reduction of electrical load

154
Regeneration of the particle filter

158
Regenerative braking (deceleration
by engine braking)

94–95
Reinitialisation of the under-inflation
detection system

99–100
Reinitialising the remote control

34
Reminder, key in ignition

87
Reminder, lighting on 57–58
Remote control
28–32
Remotely operable functions
(Electric)

27, 51, 148
Removing a wheel

169–171
Removing the mat

54
Replacing bulbs

171–172, 174
Replacing fuses

174
Replacing the air filter

158
Replacing the oil filter

158
Replacing the passenger compartment
filter

158
Reservoir, screenwash

157
Reset trip

24
Retractable support

52
Rev counter

9–10
Reversing camera

102, 127–130
Reversing lamps

174
Roof bars

152–153
Roof, opening

38–39
Running out of fuel (Diesel)

165
S
Safety, children 74–80
Saturation of the particle filter (Diesel)
158
Screenwash

63
Screenwash, front

62
SCR (Selective Catalytic Reduction)

21, 160
Seat angle

41
Seat belts

71–72, 78