2020 CHRYSLER VOYAGER Vehicle Warranty

TABLE OF CONTENTS
TIRE INFORMATION SUPPLEMENT................ 3
BFGOODRICH TIRES ........................... 27
BRIDGESTONE® - FIRESTONE® ................ 45
CONTINENTAL TIRE ............................ 87
FALKEN TIRE CORPORATION ................... 95
GENERAL TIRE ............................... 115
GOODYEAR DUNLOP TIRES ................... 123
HANKOOK TIRES ............................. 139
KUMHO TIRES ................................. 145
MICHELIN .................................... 159
NEXEN TIRE .................................. 187
PIRELLI TIRES ................................. 197
TOYO TIRES – LIMITED WARRANTY ........... 217
YOKOHAMATIRES — LIMITED WARRANTY ..... 261
1

2

TIRE
INFORMATION SUPPLEMENT

TIRES
TireSafety Information
Tire
safety
information
will
cover
aspects
of
the
following
information:

Tire
Markings,
Tire
Identification
Numbers1

•LT
(Light
Truck)
—
Metric
tire
sizing
is
based
on
US
design
standards.
The
size
designation
for
LT-Metric
tires
is
the
same
as
for
P-Metric
tires
except
for
the
letters
“LT”
that
are
molded
into
the
sidewall
preceding
the
size
designation.
Example:
LT235/85R16.
• Temporary spare tires are designed for temporary emergency use only.
Temporary high pressure compact spare tires have the letter “T” or “S”
molded into the sidewall preceding the size designation. Example:
T145/80D18 103M.
• High
flotation
tire
sizing
is
based
on
US
design
standards
and
it
begins
with
the
tire
diameter
molded
into
the


sidewall.
Example:
31x10.5
R15
LT.
Tire
Sizing
$IBSU
EXAMPLE:
Example SizeDesignation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, 
T145/80D18 103M, 31x10.5 R15LT
P =Passenger car tiresize based on US design standards, or
....blank.... = Passenger car tire based on European design standards, or
LT =Light truck tirebased on US design standards, or
Tor S =Temporary spare tireRU
31 =Overall diameter in inches (in)
215, 235,145=Section width inmillimeters (mm)
65, 85,80=Aspect ratioinpercent (%)
– Ratio of section height to section width oftire, or
10.5 =Section width ininches (in)
R =Construction code
– "R" means radial construction, or
– "D" means diagonal or bias construction
15, 16, 18 = Rim diameter in inches (in)
Service Description:
95 = Load Index
– A numerical code associated with the maximum load a tire can carry
H = Speed Symbol
– A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions
– The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, veh icle
loading, road conditions, and posted speed limits) TIRES
5

EXAMPLE:
Load Identification:
Absence of the following load identification symbols on the sidewall of th etire
indicates a Standard Load (SL) tire:
• XL
= Extra load (or reinforced) tire, or
• LL = Light load tire or
• C, D, E, F, G = Load range associated with the maximum load a tire can carry
at a specified pressure
Maximum Load–Maximum load indicates the maximum loadthistireisdesigned 
to carry
Maximum Pressure– Maximum pressure indicates the maximum permissible cold 
tire inflation pressure for this tire
TireIdentification Number (TIN)
The
TIN
may
be
found
on
one
or
both
sides
of
the
tire;
however,
the
date

code
may
only
be
on
one
side.
Ti re s
with
white
sidewalls
will
have
the

full
TIN,
including
the
date
code,
located
on
the
white
sidewall
side
of

the
tire.
Look
for
the
TIN
on
the
outboard
side
of
black
sidewall
tir
es
as

mounted
on
the
vehicle.
If
the
TIN
is
not
found
on
the
outboard
side,
then

you
will
find
it
on
the
inboard
side
of
the
tire.
EXAMPLE:
DOT MAL9ABCD 0301
DOT =Department 2fTransportation
– This symbolcertifies that thetireisin compliance with theUSDepartment
of Transportation tire safety standards and is approved for highway use
MA =Code representing the tiremanufacturing location (two digits)
L9 =Code representing the tiresize (two digits)
ABCD = Code used by the tiremanufacturer (one to four digits)
03 =Number representing the week in which thetirewas manufactured (twodigits)
–03 means the 3rd week
01 =Number representing the

year inwhich thetirewas manufactured (twodigits)
– 01 means the year 2001
– Prior to July 2000, tire manufacturers were only required to have one number
to represent the year in which the tire was manufactured. Example: 031 coul d
represent the 3rd week of 1981 or 1991
TIRES
6

Tire Terminology And Definitions
TermDefinition
B-Pillar The vehicle B-Pillar is the structural member of
the body located behind the front door.
Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire
pressure after the vehicle has not been driven
for at least three hours, or driven less than 1
mile (1.6 km) after sitting for a minimum of three
hours. Inflation pressure is measured in units of
PSI (pounds per square inch) or kPa
(kilopascals).
Maximum Inflation Pressure The maximum inflation pressure is the
maximum permissible cold tire inflation pressure
for this tire. The maximum inflation pressure is
molded into the sidewall.
Recommended Cold Tire Inflation Pressure Vehicle manufacturer’s recommended cold tire
inflation pressure as shown on the tire placard.
Tire Placard A label permanently attached to the vehicle
describing the vehicle’s loading capacity, the
original equipment tire sizes and the
recommended cold tire inflation pressures. TIRES
7