139
SCHEDULED SERVICING
During each scheduled servicing
operation and anyway every 12 months,
check operation of the soft top locks.135)Before starting the car make sure
the soft top is correctly locked.
It is recommended not to remove/install
the soft top with people sitting in the car,
as the soft top could fall in the passenger
compartment while it is moved.
Be careful while installing/removing the
soft top to prevent any damage or injury.
Keep children away from the area in which
the soft-top is folding while
installing/removing it.
IMPORTANT
29)Never open the soft top in presence
of snow or ice to prevent damage. Loads
may not be secured on the vehicle roof.
30)Bird droppings and plant resins must
be washed off the soft top immediately
as they can damage its fabric. Never use
high-pressure washing systems. When
using steam washers or high-pressure
water washers, maintain a suitable
distance and do not exceed a maximum
temperature of 60°C.
Damage, alterations and water
infiltration may occur if the distance is
too small and the pressure is too high.
WARNING
If a water jet is used, direct away from the
edges of the fabric and the windscreen
surround: water infiltration can occur.
Never use alcohol, petrol, chemical
products, detergents, stain removers,
wax, solvents and “wash and polish”
products. Rinse immediate to remove
soap to prevent stains and halos.
Repeat the operation if needed.
31) Follow the instructions on the
waterproofing product container for
perfect results. The rubber seals of the
soft top must be washed with water only.
If you notice that this trim is dry or is
sticking, apply talcum powder or products
specifically for rubber trim (silicone
spray).
