2020.25 OPEL VIVARO C seats

Seats, restraints73Permissible options for fitting an ISOFIX child restraint system with ISOFIX bracketsVivaro
Weight classSize class
On front
passenger
seatOn seats in the second
row 6
with passenger bench
in frontOn seats in the second
row 6
with single passenger
seat in frontOn seats in
the second
row (single
seats)Outer seatscentre seatOuter seatscentre seatGroup 0: up to 10 kgF
GX
XX
XX
XIL 3,4
IL 3,4X
XX
IL 2Group 0+: up to
13 kgC
D
EX
X
XX
X
XX
X
XIL 3,4
IL 3,4
IL 3,4X
X
XIL 2
IL 2
ILGroup I: 9 to 18 kgCXXXIL 3,4XIL2DXXXIL 3,4XIL2AXIUF 3,4XIUF3,4XIUF, ILBXIUF3,4XIUF 3,4XIUF, ILB1XIUF3,4XIUF 3,4XIUF, IL

74Seats, restraints
Weight classSize class
On seats in the third rowFixed rear seat and bench seatFixed one-piece bench seatGroup 0: up to 10 kgF
GX
XX
XGroup 0+: up to 13 kgCXXDXXEXXGroup I: 9 to 18 kgCXXDXXAIUF, IL 4,5XBIUF, IL4,5XB1IUF, IL4,5X

Seats, restraints75Zafira Life
Weight classSize class
On front passenger
seatOn seats in the second rowfixed seats, bench seat1/3 - 2/3 bench
seats on railsSingle seats on rails 5Group 0: up to 10 kgF
GX
XX
IL 1,2IL1,2,3
IL 1,2,3X
XGroup 0+: up to 13 kgCXIL 2ILIL3DXIL 2ILILEXILILILGroup I: 9 to 18 kgCXIL2ILIL3DXIL2ILILAXIUF, IL 4IUF, IL4IUF, IL4BXIUF, IL4IUF, IL 4IUF, IL4B1XIUF, IL4IUF, IL4IUF, IL4

76Seats, restraints
Weight classSize class
On seats in the third rowFixed rear seat and
bench seatFixed one-piece
bench seat1/3 - 2/3 bench seats
on railsSingle seats on rails 5Group 0: up to 10 kgF
GX
XX
XIL 1,2,3
IL 1,2,3X
XGroup 0+: up to 13 kgCXXXIL 3DXXIL3IL3EXXIL3ILGroup I: 9 to 18 kgCXXXIL3DXXIL3IL3AIUF, IL 4,5XIUF, IL4IUF, IL 4BIUF, IL4,5XIUF, IL4IUF, IL 4B1IUF, IL4,5XIUF, IL4IUF, IL 4IL:suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories.
The ISOFIX restraint system must be approved for the specific vehicle type (refer to the vehicle type list of the child restraint system)IUF:suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this weight classX:no ISOFIX child restraint system approved in this weight class1:with a child seat installed usage of one or more seats in the same row may not be allowed2:installation possible only behind the driver's seat3:move the respective front seat ahead of the child restraint system forwards as far as necessary

Seats, restraints774:adjust the respective headrest as necessary or remove if required5:with a child seat installed on the centre seat, usage of outer seats is not allowed6:fixed seat bench; folding seat bench is in process of being approved
ISOFIX size class and seat device
A – ISO/F3:forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kgB – ISO/F2:forward-facing child restraint system for smaller children in the weight class 9 to 18 kgB1 – ISO/F2X:forward-facing child restraint system for smaller children in the weight class 9 to 18 kgC – ISO/R3:rear-facing child restraint system for children of maximum size in the weight class up to 18 kgD – ISO/R2:rear-facing child restraint system for smaller children in the weight class up to 18 kgE – ISO/R1:rear-facing child restraint system for young children in the weight class up to 13 kgF– ISO/L1:left lateral facing position child restraint system (carry-cot)G – ISO/L2:right lateral facing position child restraint system (carry-cot)

Storage79Rear cupholder
A cupholder for the second row seat
can be located in the storage
compartment in the footwell.
Cupholders for the third row seats can be located in the sides of the load
compartment.
Fold up the multifunctional table.
Multifunctional table 3 87.
Front storage
To open the storage compartment
press the button and open the cover.
Some versions have a glovebox
cooler in the storage compartment.

Storage81Load compartment
Depending on version, the load
compartment area can be increased
by folding up or removing the seats in
the second and third row.
Vehicle version with seat benches
in second and third row
When loading the following has to be
observed:
● Only store objects on seats of the
third row folded down to the table
position, when the seats in the
second row are also folded down to the table position.
● Bench seat in the second or third
row in the tilted position: the outerseat must not be occupied.
● Single bench seat in the second or third row in the tilted position:
the center seat must not be
occupied.
● Seat in the second row folded down to the table position:
respective seat in the third row must not be occupied.
● Seat in the second row in the tilted position: respective seat inthe third row must not be
occupied.
Folding the passenger seat 3 51.
Folding or removing the rear seats
3 53.
Load compartment cover Do not place any objects on the cover.
Raise the load compartment cover to
remove it.
To install the load compartment cover
insert it in the retainers on both sides.

82StorageLashing eyes
The lashing eyes are designed to
secure items against slippage, e.g.
using lashing straps or luggage net.
Lashing eyes may be located on the
vehicle floor. The number and
location of the lashing eyes may vary depending on the vehicle.
Cargo management system
Flap behind the passenger seat Depending on version, a partition
behind the front seats protects the
driver and front passengers against
the risk of load movement.
There may be a flap in the partition
behind the passenger seat which can
be removed to accommodate long
objects.
If the outer passenger seat is folded
and the flap is open, the centre seat
has to stay free.
Removing the flap1. Release the locking device, lower
the flap and then remove it.
2. Stow the flap behind the driver’s seat.
Turn the locking device upwards.
Put the hinges of the flap in their
housing, lift the flap and close the
locking device.