Page 112 of 122

Scooter care and storage
9-3
1
2
3
4
5
6
7
8
9
10
11
12
13
14 3. Use a chrome polish to shine
chrome, aluminum, and stainless
steel parts. Often the thermally in-
duced discoloring of stainless steel
exhaust systems can be removed
through polishing.
4. Apply a corrosion protection spray on all metal parts including chrome
or nickel-plated surfaces.
WARNING! Do not apply
silicone or oil spray to seats,
hand grips, rubber foot pegs or
tire treads. Otherwise these
parts will become slippery,
which could cause loss of con-
trol. Thoroughly clean the sur-
faces of these parts before
operating the vehicle.
[EWA20650]
5. Treat rubber, vinyl, and unpaintedplastic parts with a suitable care
product.
6. Touch up minor paint damage caused by stones, etc.
7. Wax all painted surfaces using a non-abrasive wax or use a detail
spray for motorcycles.
8. When finished cleaning, start the engine and let it idle for several
minutes to help dry any remaining
moisture.
9. If the headlight lens has fogged up, start the engine and turn on the
headlight to help remove the mois-
ture.
10. Let the vehicle dry completely be- fore storing or covering it.
NOTICE
ECA26320
Do not apply wax to rubber or
unpainted plastic parts.
Do not use abrasive polishing
compounds as they will wear away the paint.
Apply sprays and wax sparing-
ly. Wipe off excess afterwards.
WARNING
EWA20660
Contaminants left on the brakes or
tires can cause loss of control.
Make sure there is no lubricant
or wax on the brakes or tires.
If necessary, wash the tires with
warm water and a mild deter-
gent.
If necessary, clean the brake
discs and pads with brake
cleaner or acetone.
Before riding at higher speeds,
test the vehicle’s braking perfor-
mance and cornering behavior.
BV1-9-E2.book 3 ページ 2018年8月28日 火曜日 午後5時28分
Page 114 of 122
Scooter care and storage
9-5
1
2
3
4
5
6
7
8
9
10
11
12
13
14 Otherwise, turn the wheels a little
once a month in order to prevent
the tires from becoming degraded
in one spot.
9. Cover the muffler outlet with a plastic bag to prevent moisture
from entering it.
10. Remove the battery and fully charge it, or attach a maintenance
charger to keep the battery opti-
mally charged. NOTICE: Confirm
that the battery and its charger
are compatible. Do not charge a
VRLA battery with a convention-
al charger.
[ECA26330]
TIP
If the battery will be removed,
charge it once a month and store it
in a temperate location between 0-
30 C (32-90 F).
See page 8-28 for more informa-
tion on charging and storing the
battery.
BV1-9-E2.book 5 ページ 2018年8月28日 火曜日 午後5時28分
Page 120 of 122

Index
12-2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Spark plugs, checking ............................. 8-9
Special features ...................................... 4-1
Specifications ........................................ 10-1
Speedometer .......................................... 5-4
Starting off............................................... 7-3
Starting the engine .................................. 7-2
Steering, checking ................................ 8-27
Storage ................................................... 9-4
Storage compartment and fuel tank access ................................................ 3-11
Storage compartments.......................... 5-23
T
Tachometer ............................................. 5-4
Throttle grip and cable, checking and lubricating ........................................... 8-25
Throttle grip free play, checking ............ 8-17
Tires ...................................................... 8-18
Tool kit .................................................... 8-2
Traction control system ........................... 4-4
Traction control system indicator light..... 5-3
Troubleshooting .................................... 8-33
Troubleshooting charts ......................... 8-35
Turn signal indicator lights ...................... 5-2
Turn signal light bulb (front), replacing ............................................. 8-32
Turn signal switch ................................... 5-1
V
Valve clearance .................................... 8-17
Vehicle identification number ................ 11-1
Vehicle lights ......................................... 8-31
W
Wheel bearings, checking ..................... 8-27
Wheels .................................................. 8-20
Windshield (XP530-A)........................... 5-24
Y
Yamalube .............................................. 8-13
BV1-9-E2.book 2 ページ 2018年8月28日 火曜日 午後5時28分