2019 TOYOTA SUPRA jacking

299
5
Supra Owner's Manual5-1. MOBILITY
MOBILITY
The vehicle manufacturer recom-
mends that the vehicle should addi-
tionally be protected against rolling
away during a wheel change.
WARNING
The jack, issued by the vehicle manu-
facturer, is provided in order to per-
form a wheel change in the event of a
breakdown. The jack is not designed
for frequent use; for example, chang-
ing from summer to winter tyres.
Using the jack frequently may cause it
to become jammed or damaged.
There is a danger of injury and dam-
age to property. Only use the jack to
change an emergency wheel or a
spare wheel in the event of a flat tyre.
WARNING
On soft, uneven or slippery ground,
for example, snow, ice, tiles or similar,
the jack may slip. There is a danger of
injury. Perform the wheel change on a
level, firm and non-slip surface if at all
possible.
WARNING
The jack is only optimised for raising
the vehicle and for use with the jack-
ing points on the vehicle. There is a
danger of injury. Do not lift another
vehicle or other items with the jack.
WARNING
If the jack has not been guided intot
he jacking point provided, the vehicle
might be damaged when the jack is
extended, or the jack could slip. There
is a danger of injury or damage to
property. When extending, make sure
that the jack is guided into the jacking
point adjacent to the wheelhouse.
WARNING
A vehicle raised with a jack can fall
from the jack if lateral forces are
applied. There is a danger of injury
and damage to property. If the vehi-
cleis raised, do not apply any lateral
forces to the vehicle or pull the vehi-
cle with sudden movements. Have
any wheel that is jammed removed by
any authorized Toyota retailer or
Toyota authorized repairer, or any reli-
able repairer.
WARNING
The jack supplied with your vehicle
should not be used for any purpose
other than wheel changing and
should never be used in conjunction
with a vehicle support stand. Raising
the vehicle for the purpose of inspec-
tion should only be performed in a
controlled workshop environment on
a hoist by trained personnel.
The jack should be used on level firm
ground wherever possible. It is rec-
ommended that the wheels of the
vehicle be chocked, and that no per-
son should remain in a vehicle that is
being jacked.
The jack of your Toyota is mainte-
nance-free. Please observe the infor-
mation marked on the jack.
Protecting the vehicle
against rolling
General

301
5
Supra Owner's Manual5-1. MOBILITY
MOBILITY
3After screwing on the wheel
stud, remove the adapter again
and stow it.
• Park the vehicle on firm and-
non-slip ground at a safe dis-
tance from traffic.
• Switch on the hazard warning
lights.
• Apply the parking brake.
• Engage a gear or select selector
lever position P.
• As soon as the traffic permits,
have all vehicle occupants get
out of the vehicle and guide them
out of the danger area, for exam-
ple behind the crash barrier.
• Depending on the equipment,
take the wheel change tools and,
if necessary, the emergency
wheel out of the vehicle.
• If applicable, set up warning tri-
angle or flashing light at the cor-
rect distance.
• Additionally protect the vehicle
against rolling away.
• Undo the wheel studs by half a
turn.The jacking points are located in
the marked positions.
1Hold the jack with one hand,
arrow 1, and grasp the jack
crank or lever with your other
hand, arrow 2.
2Guide the jack into the rectangu-
lar recess of the jacking point Preparing the vehicleJacking points
Raising vehicle
WARNING
Your hands or fingers could get
trapped when using the jack. There is
a danger of injury. Keep your hands in
the described position when using the
jack, and do not change this position.

302
Supra Owner's Manual5-1. MOBILITY
closest to the wheel to be
changed.
3Turn the jack crank or lever
clockwise to extend the jack.
4Remove your hand from the jack
as soon as the jack is under
load and continue to turn the
jack crank or lever with one
hand.
5Make sure that the base of the
vehicle jack is extended perpen-dicular to and at right angles
underneath the jacking point.
6Make sure that the base of the
jack is extended perpendicular
to and at right angles below the
jacking point.
7Raise by cranking until the jack
is supported on the ground with
its entire surface and the wheel
in question is at most 3 cm, 1.2
inches off the ground.
Only fit one emergency wheel at
most, as required.
1Unscrew the wheel studs.
2Remove the wheel.
3Put on the new wheel or emer-
gency wheel and tighten at least
Fitting a wheel