2019 TOYOTA MIRAI display
[x] Cancel search: displayPage 33 of 56
![TOYOTA MIRAI 2019 Owners Manual (in English) 31
Radar sensorCamera sensor
Sensors
TSS combines an in-vehicle camera mounted in front of the inside rear vi\
ew mirror and
a radar mounted in the front grill. These sensors support the driver ass\](/manual-img/14/42621/w960_42621-32.png "TOYOTA MIRAI 2019 Owners Manual (in English) 31
Radar sensorCamera sensor
Sensors
TSS combines an in-vehicle camera mounted in front of the inside rear vi\
ew mirror and
a radar mounted in the front grill. These sensors support the driver ass\")
31
Radar sensorCamera sensor
Sensors
TSS combines an in-vehicle camera mounted in front of the inside rear vi\
ew mirror and
a radar mounted in the front grill. These sensors support the driver ass\
ist systems.
The Pre-Collision System uses a radar sensor and camera sensor to help d\
etect a
vehicle or pedestrian or bicyclist in front of your vehicle.
As there is a limit to the degree of recognition accuracy and control pe\
rformance that
this system can provide, do not overly rely on this system. This system \
will not prevent
collisions or lessen collision damage or injury in every situation. Do n\
ot use PCS
instead of normal braking operations under any circumstances. Do not att\
empt to test
the operation of the Pre-Collision System yourself, as the system may no\
t operate or
engage, possibly leading to an accident. In some situations, such as whe\
n driving in
inclement weather such as heavy rain, fog, snow or a sandstorm or while \
driving on a
curve and for a few seconds after driving on a curve, a vehicle or pedes\
trian may not
be detected by the radar and camera sensors, preventing the system from \
operating or
engaging properly.
Refer to a Toyota Owner’s Manual for a list of additional situations \
in which the
system may not operate properly.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision i\
s high, a buzzer
will sound and a warning message will be displayed on the Multi-Informat\
ion Display
(MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide addi\
tional braking
force using Brake Assist. This system may prime the brakes and may apply\
greater
braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision System with
Pedestrian Detection (PCS w/PD)
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3110/22/18 1:28 PM
Page 35 of 56
![TOYOTA MIRAI 2019 Owners Manual (in English) 33
CHANGING PRE-COLLISION ALERT TIMING
% * 4 " # - * / ( 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
Far
Mi](/manual-img/14/42621/w960_42621-34.png "TOYOTA MIRAI 2019 Owners Manual (in English) 33
CHANGING PRE-COLLISION ALERT TIMING
% * 4 \" # - * / ( 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
Far
Mi")
33
CHANGING PRE-COLLISION ALERT TIMING
% * 4 " # - * / ( 1 3 & $ 0 - - * 4 * 0 / 4 : 4 5 & . 1 $ 4
Each time the PCS switch is pressed, the response to the PCS alert timin\
g changes.
Far
Middle
(default)
Near
1 S F T T i” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select from the MID and then press
“
”. The setting screen is displayed.
1 S F T T i
” each time to change the setting. Each time it is pressed, the
S F T Q P O T F U P U I F 1 $ 4 B M F S U U J N J O H D I B O H F T B T T I P X O B C P W F : P V D B O press “
” to
go back to the menu.
Note: PCS is enabled each time the ignition switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
1 S F T T i
” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” and “” switches to change the setting.
1 S F T T i
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON
mode.
Refer to a Toyota Owner’s Manual for additional information on PCS op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3310/22/18 1:28 PM
Page 36 of 56
![TOYOTA MIRAI 2019 Owners Manual (in English) 34
TOYOTA SAFETY SENSE™
LDA in TSS uses an in-vehicle camera designed to detect visible white an\
d yellow
lane markers or road edge in front of the vehicle and the vehicle’s p\
osition on the
r](/manual-img/14/42621/w960_42621-35.png "TOYOTA MIRAI 2019 Owners Manual (in English) 34
TOYOTA SAFETY SENSE™
LDA in TSS uses an in-vehicle camera designed to detect visible white an\
d yellow
lane markers or road edge in front of the vehicle and the vehicle’s p\
osition on the
r")
34
TOYOTA SAFETY SENSE™
LDA in TSS uses an in-vehicle camera designed to detect visible white an\
d yellow
lane markers or road edge in front of the vehicle and the vehicle’s p\
osition on the
road. If the system determines that the vehicle is starting to unintenti\
onally deviate
from its lane, the system alerts the driver with an audio and visual ale\
rt. When the
alerts occur, the driver must check the surrounding road situation and c\
arefully
operate the steering wheel to move the vehicle back to the center part o\
f their lane.
- % " J T E F T J H O F E U P G V O D U J P O B U T Q F F E T P G B Q Q S P Y J N B U F M Z N Q I L N I
P S I J H I F S
on relatively straight roadways.
* O B E E J U J P O U P U I F B M F S U G V O D U J P O
- % " X 4 " B M T P G F B U V S F T B T U F F S J O H B T T J T U
function. When enabled, if the system determines that the vehicle is on \
a path to
unintentionally depart from its lane, the system may provide small corrective steering
inputs to the steering wheel for a short period of time to help keep the\
vehicle in its
lane.
If the vehicle repeatedly deviates from the lane, the vehicle drifts wit\
hin the lane due
to inattention, or the driver abruptly operates the steering wheel after\
an inattentive
period, when enabled, the vehicle sway warning function alerts the drive\
r with an
audio and visual alert, urging them to take a break.
Lane Departure Alert with Steering Assist
(LDA w/SA)
5 6 3 / * / ( 5 ) & - % " 4 : 4 5 & . 0 / 0 ' '
Press the LDA switch to turn the LDA system on. Depress again to turn it\
off.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
Press to ONMulti-Information Display
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3410/22/18 1:28 PM
Page 37 of 56
35
LANE DEPARTURE ALERT
LDA function display
Operation display
of steering wheel
operation supportLDA indicator
Steering control
indicator
Lane markers
(2)
(1)
- B O F % F Q B S U V S F " M F S U - % "
J O E J D B U P S G M B T I F T P S B O H F X I F O P Q F S B U J O H
The LDA function E J T Q M B Z T X I F O U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
J T T X J U D I F E
to the driving assist system information screen.
5 I F T Z T U F N E J T Q M B Z T T P M J E X I J U F M J O F T P O U I F - % " J O E J D B U P S X I F O W J T J C M F M B O F
markers on the road are detected. A side flashes orange to alert the dri\
ver when the
vehicle deviates from its lane.
5 I F T Z T U F N E J T Q M B Z T P V U M J O F T P O U I F - % " J O E J D B U P S X I F O M B O F N B S L F S T P O U I F S P B E
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LDA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to a Toyota Owner’s Manual for additional information on LDA op\
eration,
settings adjustments, limitations, and precautions before attempting to \
use it.
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3510/22/18 1:28 PM
Page 40 of 56
38
5 6 3 / * / ( 4 : 4 5 & . 0 / 0 ' '
" % + 6 4 5 * / ( 4 & 5 4 1 & & %
(3)
(1)
Push once: On
Push twice: Off
(2)
TOYOTA SAFETY SENSE™
DRCC helps maintain a pre-set distance to a preceding vehicle when the p\
receding
vehicle is traveling at a lower speed. This mode is always selected firs\
t when the
cruise control button is depressed. Constant speed cruise control mode i\
s also
available.
Refer to page 40 for switching to Constant Speed (Cruise) Control Mode\
.
Increase speedResume2
Cancel1
Decrease speed
Set
Vehicle-to-vehicle distance button
Set speed
Dynamic radar control switch Indicators
Display
Dynamic Radar Cruise Control (DRCC)
1
The set speed may also be cancelled by depressing the brake pedal.
2 The set speed may be resumed once vehicle speed exceeds 25 mph.
Vehicle will cruise at a set speed, decelerate to maintain selected dist\
ance from a
slower vehicle traveling in front and accelerate back up to the selected\
speed if the
vehicle in front changes lanes or speeds up.
1 V T I U I F 0 / 0 ' ' C V U U P O 5 I F i 3 " % " 3 3 & " % : w P S i
” indicator will come on.
1 V T I U I F M F W F S E P X O U P 4 & 5 T Q F F E
Q V T I J U V Q U P 3 F T V N F B O E Q V M M J U P S E F Q S F T T brake to Cancel.
1 V T I V Q U P J O D S F B T F U I F T F U T Q F F E
Q V T I E P X O U P E F D S F B T F N Q I < L N I > P S L N I < N Q I > J O D S F N F O U T
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 3810/22/18 1:28 PM
Page 42 of 56
40
TOYOTA SAFETY SENSE™
4 8 * 5 $ ) * / ( 5 0 $ 0 / 4 5 " / 5 4 1 & & % $ 3 6 * 4 &
$ 0 / 5 3 0 - . 0 % &
4 & 5 5 * / ( $ 0 / 4 5 " / 5 4 1 & & % $ 3 6 * 4 &
$ 0 / 5 3 0 -
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic
deceleration via the cruise control is not possible, the display will flash and the
buzzer will sound to alert the driver. An example of this would be if another driver
cuts in front of you while you are following a vehicle. Depress the brake pedal to
ensure an appropriate vehicle-to-vehicle distance.
If you are already using DRCC “ w
Q V T I 0 / 0 ' ' C V U U P O U P U V S O U I F T Z T U F N P G G
G J S T U
U I F O Q V T I B O E I P M E 0 / 0 ' ' C V U U P O G P S B U M F B T U T F D P O E T U P T X J U D I
Note: When the ignition is turned off, it will automatically default to DRCC.
Refer to a Toyota Owner’s Manual for additional information on DRCC o\
peration,
settings adjustments, limitations, and precautions before attempting to \
use it.
1.5 seconds
Set
Acceleration when there are no longer any preceding vehicles driving
slower than the set speed The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SET SPEED on
page 38.
" % + 6 4 5 * / ( % * 4 5 " / $ & $ 0 / 5 * / 6 & %
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 4010/22/18 1:28 PM
Page 44 of 56
![TOYOTA MIRAI 2019 Owners Manual (in English) 42
TOYOTA SAFETY SENSE™
Road Sign Assist (RSA)
Road Sign Assist is designed to help ensure drivers are kept informed. T\
he RSA
T Z T U F N S F D P H O J [ F T T Q F D J G J D S P B E T J H O](/manual-img/14/42621/w960_42621-43.png "TOYOTA MIRAI 2019 Owners Manual (in English) 42
TOYOTA SAFETY SENSE™
Road Sign Assist (RSA)
Road Sign Assist is designed to help ensure drivers are kept informed. T\
he RSA
T Z T U F N S F D P H O J [ F T T Q F D J G J D S P B E T J H O")
42
TOYOTA SAFETY SENSE™
Road Sign Assist (RSA)
Road Sign Assist is designed to help ensure drivers are kept informed. T\
he RSA
T Z T U F N S F D P H O J [ F T T Q F D J G J D S P B E T J H O T V T J O H B G P S X B S E G B D J O H J O U F M M J H F O U D B N F S B U P
Q S P W J E F J O G P S N B U J P O U P U I F E S J W F S W J B B . V M U J J O G P S N B U J P O % J T Q M B Z . * %
* G U I F T Z T U F N
K V E H F T U I B U U I F W F I J D M F J T C F J O H E S J W F O P W F S U I F T Q F F E M J N J U
P S Q F S G P S N J O H B D U J P O T
prohibited by other support types of road signs, it alerts the driver us\
ing a warning
E J T Q M B Z B O E N B Z T P V O E B X B S O J O H C V [ [ F S
3 4 " % * 4 1 " :
4 6 1 1 0 3 5 & % 5 : 1 & 4 0 ' 3 0 " % 4 * ( / 4
SETTING RSA
When the driving assist systems
display is selected, a maximum of
2 signs can be displayed.Speed limit Stop
Do Not Enter : J F M E
When a tab other than the driving
assist systems display is selected,
P O M Z B S F D P H O J [ F E T Q F F E M J N J U T J H O P S
E P O P U F O U F S T J H O X I F O O P U J G J D B U J P O J T
O F D F T T B S Z
X J M M C F E J T Q M B Z F E
1 S F T T i
” switches and select G S P N U I F . V M U J * O G P S N B U J P O % J T Q M B Z . * %
1 S F T T i
” switches and select the setting function and then press “.”
1 S F T T i
” each time to change the setting.
1 S F T T i
” to go back to the menu.
Note: If the ignition switch was last turned off while a speed limit sign was
displayed on the multi-information display, the same sign displays again when
the ignition switch is turned back ON.
Refer to the Owner’s Manual for additional information on RSA operati\
on, settings
adjustments, limitations, and precautions before attempting to use it.
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 4210/22/18 1:28 PM
Page 51 of 56
49
To begin the Bluetooth® Pairing process, press the HOME button on the faceplate of
your multimedia system.
Bluetooth® Pairing for your phone
Pairing your phone is the first step in connecting with your Toyota for \
hands-free
calling and for audio streaming via Bluetooth. This pairing process is q\
uick and easy.
All you have to do is setup the phone and multimedia system to form a co\
nnection.
1
Select "Bluetooth", then select
"Add New Device"on display
screen.
Ensure Bluetooth is turned on for
your device.
Select "Device Name".
iPhone bluetooth MenuAndroid bluetooth Menu
1
Some Android devices may have slightly different SETTINGS screen layout\
depending on manufacturer of device and Android OS version.
Check the display on your smart
Q I P O F % P F T U I F 1 * / 9 9 9 9
match the PIN displayed? If it
does select "Pair".
1 S F T T < . & / 6 > P O U I F G B D F Q M B U F
U I F O T F M F D U