2019 TOYOTA MIRAI phone

2
OVERVIEWInstrument panel
Steering wheel controls
Odometer/trip
meter and trip
meter reset
button
Telephone switches
1
Voice command switch1
Audio control switches1
Dynamic Radar Cruise
Control (DRCC)/Cruise
control switch
Power switch
Parking brake lever
Hood lock release lever
Trunk opener
switch
Fuel door opener
switch Water release switch
Automatic High
Beam (AHB) switch
Power tilt and telescopic
steering lock control switch
Instrument panel light
control switches
Meter control switches
Dynamic Radar Cruise
Control (DRCC)
vehicle-to-vehicle
distance switchLane Departure Alert
(LDA) switch
Turn signal lever and headlight switch Windshield wiper and washer switch
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 210/22/18 1:27 PM

23
Qi Wireless charger
(1)
Operation
indicator light
Power
supply switch
Charge area
When the fuel cell system is turned off, the last
state (ON/OFF) of the charger is memorized.
Place device nearest the center of charging area for
best results. Moving device may result in stopping
or restarting the charging process.
(2)
(3)
A mobile device can be charged wirelessly on the tray. (1) Open the console box.
(2) Press the power supply switch and the green operation indicator light tu\
rns
on. (3) Place a mobile device on the tray as shown in the illustration. An ambe\
r
indicator illuminates while charging is in progress. When charging is co\
mplete, the
indicator illuminates green. Some phones, cases or cover type wireless c\
hargers
may not cause the green indicator to illuminate even though it is fully \
charged.
Refer to the Owner‘s Manual for more details on this system before at\
tempting to
use it.
Press
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 2310/22/18 1:28 PM

24
FEATURES & OPERATIONS
Odometer/trip meter and
reset switch
Audio/Multimedia remote control
Voice command switch /
Mobile Assistant access*
End call
Start call
Steering wheel switches
& telephone controls (Bluetooth®)
: Volume Control
: Push to change an audio
mode. Push and hold to
turn the audio mutes or
pauses.
: Use to search within
the selected audio
medium (radio, CD,
etc.).
Steering wheel telephone switches
Microphone
Bluetooth® technology allows dialing or receipt of calls without removing your han\
ds
from the steering wheel or using a cable to connect the compatible telep\
hone and
the system.
* Push and hold to access Mobile Assistant. When a compatible smartphone\
is
Bluetooth® connected push and hold the Voice command switch 2-3 seconds to
access Siri® &ZFT 'SFF

Refer to the “Bluetooth
® Device Pairing Section” in this guide for more information
about phone connections and compatibility.
Refer to the “Navigation System Owner’s Manual” for more detail\
s.
NOTE: Concentrating on the road should always be your first priority while
driving. Do not use the Entune system if it will distract you.
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 2410/22/18 1:28 PM

43
Safety Connect® (if equipped)
Safety Connect® is a subscription-based telematics service that uses Global
1PTJUJPOJOH 4ZTUFN (14
EBUB BOE FNCFEEFE DFMMVMBS UFDIOPMPHZ UP QSPWJEF TBGFUZ
and security features to subscribers. Safety Connect
® is supported by Toyota’s
designated response center, which operates 24 hours per day, 7 days per \
week.
Services for subscribers include: Automatic collision notification, Stol\
en vehicle
location, Emergency assistance button and Enhanced roadside assistance
Contact your dealer for more information about Safety Connect
®.
Microphone
LED Indicators “SOS” button
Rear door child safety locks
Moving the lever to lock position will allow the door to be opened only \
from the
outside.
Rear door
Lock
SAFETY & EMERGENCY FEATURES
OVERVIEW
HYDROGEN FUEL CELL SYSTEM
& SAFETY FEATURES
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 4310/22/18 1:28 PM

49
To begin the Bluetooth® Pairing process, press the HOME button on the faceplate of
your multimedia system.
Bluetooth® Pairing for your phone
Pairing your phone is the first step in connecting with your Toyota for \
hands-free
calling and for audio streaming via Bluetooth. This pairing process is q\
uick and easy.
All you have to do is setup the phone and multimedia system to form a co\
nnection.
1
Select "Bluetooth", then select
"Add New Device"on display
screen.
Ensure Bluetooth is turned on for
your device.
Select "Device Name".
iPhone bluetooth MenuAndroid bluetooth Menu
1
Some Android devices may have slightly different SETTINGS screen layout\
depending on manufacturer of device and Android OS version.
Check the display on your smart
QIPOF %PFT UIF 1*/ 9999
match the PIN displayed? If it
does select "Pair".
1SFTT <.&/6> PO UIF GBDFQMBUF
UIFO TFMFDU

50
BLUETOOTH® DEVICE PAIRING
"Connecting" displays while
device is forming the connection
to your multimedia system.&OBCMF /PUJGJDBUJPOT UFYU
NFTTBHF
 8IJMF QBJSJOH ZPVS
device message will display:
"You may need to allow
message access on your
phone".
/PUF :PV NBZ BMTP TFMFDU
"Skip" on display screen to skip
enabling notifications. If skipped
proceed to Step 8.
Turn on "Show Notifications" for
iPhone or "ON" for Android.
A confirmation will appear once
your phone has been paired and
connected.
iPhoneAndroid
Bluetooth® Pairing for your phone (cont.)
STEP 6
STEP 8
STEP 7
STEP 9
50037_MY19_Mirai_QRG_V3_ML_1011_Text_R1.indd 5010/22/18 1:28 PM