2019 TOYOTA CAMRY Owners Manual (in English)

15
* Intermittent windshield wiper frequency adjustment Rotate to increase/decrease
wipe frequency.
Refer to the Owner’s Manual for more details.
Windshield wipers & washers
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Adjust frequency*
Pull to wash and wipeMist
Interval wipe
Slow
Fast
Seat heaters (if equipped)
Driver seatFront passenger seat

16
FEATURES & OPERATIONS
Air conditioning/heating
AUTOMATIC (IF EQUIPPED)
With “SYNC” button
Temperature selector
(driver’s side)Temperature selector
Automatic climate control ON -
Adjusting the temperature setting will
cause the airflow vents, air intake and
fan to adjust automatically. Automatic climate control ON -
Adjusting the temperature setting will
cause the airflow vents, air intake and
fan to adjust automatically.
“SYNC” button - Indicator ON: Synchronized
temperature settings for driver and pas-
sengers. Indicator OFF: Separate temperature
settings for driver and passengers.
Airflow mode display
Airflow mode display
Airflow vent mode - In “
” or “” mode,
use outside air (“” indicator OFF) to
reduce window fogging. Airflow vent mode - In “
” or “” mode,
use outside air (“” indicator OFF) to
reduce window fogging.
Temperature selector
(passenger’s side)
Recirculate cabin air
(outside air when OFF)Recirculate cabin air
(outside air when OFF)
Outside rearview mirror*/
rear window defogger
* If equipped.
* If equipped.
Rear window defogger
Outside rearview mirror*/
rear window defogger
Climate control OFF
Climate control OFF
Air ConditioningON/OFF
Rear window defogger
Air Conditioning
ON/OFF
Fan speed
Fan speed
Windshield airflow/defoggerWindshield airflow/defogger
Without “SYNC” button
Type A

17
AUTOMATIC (IF EQUIPPED) (CONTINUED)
With “SYNC” button (continued)
Fan speed
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Temperature selector
(driver’s side)
Automatic climate control ON -
Adjusting the temperature setting will
cause the airflow vents, air intake and
fan to adjust automatically.
“SYNC” button - Indicator ON: Synchronized
temperature settings for driver and pas-
sengers. Indicator OFF: Separate temperature
settings for driver and passengers.
Airflow mode display
Airflow vent mode - In “
” or “” mode,
use outside air (“” indicator OFF) to
reduce window fogging.
Airflow vent mode - In “
” or “”
mode, use outside air (“” indicator
OFF) to reduce window fogging.Temperature selector
(passenger’s side)
Temperature selector
Recirculate cabin air
(outside air when OFF)
Outside rearview mirror*/
rear window defogger
Outside rearview mirror*/
rear window defogger
Air conditioning ON/OFF
Rear window defogger
* If equipped.
Climate control OFF
Air Conditioning ON/OFF
Fan speed Windshield airflow/defogger
Windshield airflow/defogger
MANUAL (IF EQUIPPED)
Recirculate cabin air
(outside air when OFF)
Type B

18
FEATURES & OPERATIONS
Intelligent Clearance Sonar with Rear Cross
Traffic Braking (ICS w/RCTB)
(if equipped)
When parking, this available system scans for stationary objects, like walls or
lampposts. Should the system anticipate a collision, it will emit an audible and
visible alert, reduce engine or motor output, and automatically apply the brakes
if needed. If your vehicle is equipped with ICS, the RCTA system will also have a
braking function that may apply the vehicle’s brakes if the system detects crossing
vehicles while the Camry is backing up.
System ON/OFF on the
Multi-Information Display.
CHANGE SETTINGS
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in decision-making when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system is designed to use radar sensors to detect vehicles traveling in the
Camry’s blind spot and advises the driver of the vehicles’ presence via the outside
rear view mirror indicators.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
(if equipped)
Indicators
Indicators
RCTA function
displayRear Cross Traffic Alert buzzer Outside rear view mirror indicators

19 If the sensors detect an obstacle, the buzzer and MID display informs the driver of
the approximate position and distance of the obstacle by illuminating continuously
(far) or blinking (near).
Note: Use
/, / and of the meter control switches to select
and
in the Multi-Information Display (MID) to change settings. The system
will continue in the last state it was in (ON or OFF) when the engine is started
again.
* Refer to “Intuitive parking assist” section in the Owner’s Manual for more details.
Note: Use/, / and of the meter control switches to select
and
in the Multi-Information Display (MID) to change settings. The system
will continue in the last state it was in (ON or OFF) when the engine is started
again.
Refer to the Owner‘s Manual for more details on this system.
INTELLIGENT PARKING ASSIST* (IF EQUIPPED)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Front
center sensor
Rear
center sensor Corner sensors
(front)Corner sensors
(front)
Corner sensors
(rear)Corner sensors
(rear)
Intelligent Clearance Sonar with Rear Cross
Traffic Braking (ICS w/RCTB)
(if equipped)
When parking, this available system scans for stationary objects, like walls or
lampposts. Should the system anticipate a collision, it will emit an audible and
visible alert, reduce engine or motor output, and automatically apply the brakes
if needed. If your vehicle is equipped with ICS, the RCTA system will also have a
braking function that may apply the vehicle’s brakes if the system detects crossing
vehicles while the Camry is backing up.
Note: Use/, / and of the meter control switches to select
and
in the Multi-Information Display (MID) to change settings. The system
will continue in the last state it was in (ON or OFF) when the engine is started
again.
Refer to the Owner‘s Manual for more details on this system.
System ON/OFF on the
Multi-Information Display.
CHANGE SETTINGS

20
FEATURES & OPERATIONS
Rear view monitor system
See-through view switch Moving view switchRotation pause switch Rotation pause switch
The Bird’s Eye View Camera with Perimeter Scan function assists the driver in
viewing the surroundings, when operating at low speeds or parking, by combining
front, side and rear cameras and displaying an overhead image on the Entune™
3.0 screen.
To view or turn OFF the screen, press the camera switch when the shift lever is in
the “P” position. It will display two angles, the Moving view and the See Through
view.

For limitations and more details, refer to section 6-3 in the “NAVIGATION AND
MULTIMEDIA SYSTEM OWNER’S MANUAL.”
Moving viewSee through view
Bird’s Eye View Camera
with Perimeter Scan Function
(if equipped)
The rear view monitor system displays an image of the view from the bumper
of the rear area of the vehicle. The camera for the rear view monitor system is
located above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button
and select “Display” on the screen. Select “Camera” to adjust the screen
contrast and brightness.
Refer to the Navigation and Multimedia System Owner‘s Manual for limitations
and more details on this system.

21
Multi-Information Display (MID)
4.2” DISPLAY (IF EQUIPPED)
7” DISPLAY (IF EQUIPPED)
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
(1) Drive information
(2) Audio system-linked display
(3) Driving assist system information
(1) Warning messages
(2) Eco-friendly driving information
(3) Driving assist system informationPush “meter control switches” to change information in the following:
Push “meter control switches” to change information in the following:
Refer to the Owner’s Manual for more details.(4) Warning messages
(5) Settings display
(4) Audio system-linked display
(5) Vehicle information
(6) Settings display
Indicators
Menu icons
Shift position Outside temperatureSpeed limit display
(with navigation system)
Clock Full-Speed DRCC and
Lane Departure Alert display
Previous screen
Previous screen
Speedometer IndicatorsDisplay areaMenu icons Shift position
Indicators
Enter/Select
Enter/Select
Scroll/search
screens
Scroll/search
screens
Odometer/trip
meter control
“ODO/TRIP” switch
Odometer/trip meter display
Display area Odometer/trip
meter control
display

22
Moonroof (if equipped)
Color Head-up display (HUD) (if equipped)
The head-up display can display the current vehicle speed and ECO driving
indicator in front of the driver. Also, it can display various types of information to
assist the driver.
Select “
” and then “” in the Multi-Information Display (MID) to access
Head-up display settings. And push “
,” to enter selection.
Refer to the Owner’s Manual for more details.
Driving assist system status/
navigation system-linked display area
(if equipped)
Recommended driving position
to minimize wind noise. Push once to open partway;
again to open completely.
FEATURES & OPERATIONS
SLIDING OPERATION
TILTING OPERATION
Lightly press either side of the moonroof switch while opening/tilting is in progress,
the moonroof stops partway.
Push once to open completely.
Shift position/speed limit display area
ECO driving indicator/Tachometer Information display areaVehicle speed display
TiltClose
OpenClose