16
Three-zone Automatic Climate Control
1 Automatic On and Off Button
This system automatically controls
outlet air temperature, fan speed, air
flow distribution, air inlet control, and air
conditioner compressor operation. Press
“AUTO” to activate. Press “OFF” to turn
off the system.
2 Temperature Control Dial
Rotate the dial clockwise to increase the
temperature or rotate the dial counter -
clockwise to decrease the temperature.
The temperature is displayed digitally on
the screen. Separate temperature settings
can be adjusted for the driver’s side and
passenger’s side.
3 SYNC Button Press the button to synchronize both
the driver’s side and passenger’s side
temperatures using the driver’s side
temperature control.
Operation in Manual Mode
4 Air Conditioner Button Press the “A/C” button to activate the air
conditioning. Press it again to turn off the
air conditioning.
5 MAX Air Conditioner Button
For quicker cooling, press the
“MAX A/C” button.
6 Air Flow Mode Selection Button
Press the button to select the desired
air flow mode. The selected air flow mode
– either ventilation, ventilation 2, bi-level,
heat, heat-defrost or defrost – is shown
on the display.
7 Fan Speed Control Dial
Rotate the fan speed control dial to select
the desired fan speed.
8 Recirculated/Outside Air Button
Press the air inlet selection button to
prevent outside air from being drawn
into the passenger compartment. Press
the button again to allow outside air
into the compartment. TO PREVENT
WINDSHIELD FOGGING, DO NOT
REMAIN IN THE RECIRCULATED MODE
FOR AN EXTENDED PERIOD OF TIME.
9 Defroster Button Press the button to defrost or dehumidify
the windshield and front door windows.
10 Rear Window Defogger Button
Press the button to turn on the defogger.
It will automatically shut off after about
15 minutes. If the window clears before
that time, you can press the button again
to turn it off. If equipped, the outside
mirror defogger and windshield wiper
de-icer will also activate.
Controls
2
15
3
4
2
7
89106
11
12
3422055_19a_Subaru_Ascent_QRG_032118.indd 163/21/18 10:50 AM
