2019 Seat Ibiza pairing phone

Operating modes
Follow instructions in the manual for the mo-
bil e t
elephone
.
During the pairing pr
ocess, it is necessary to
enter data via the mobile telephone

Infotainment System
deleted, and then press Delete to confirm
the pr ocess. WARNING
Do not perform the pairing and connection
process while driving. This may cause an
accident! Note
Check that there are no requests pending
acceptance in your mobile phone. If ther e
ar
e, this could block some of the functions
in the Telephone menu. Telephone main menu
Fig. 197
Phone main menu. Assign a user profile
The phonebook
, the call lists and the speed
dial butt ons are assigned t
o a user pr

ofile andremain stored on the telephone management
system. This information will be availabl

e ev-
ery time the mobile telephone is connected.
After the first connection, it will take a few mi-
nutes for the data from the linked mobile
phone to be available in the system. The next
time that the mobile telephone is connected
the phonebook is updated automatically.
If the mobile phonebook has been modified
while connected, a manual update of the
phonebook data can be started from the
User profile settings menu.
Telephone management can store a maxi-
mum of 4 profiles for mobile phones. If you
wish to pair another mobile phone, the oldest
user profile will be replaced.
Telephone management system function
buttons

Operating modes
Once the first pairing is made, it may take
some time until the phonebook dat a1)
of the
pair ed mobil e ar
e av
ailable in the infotain-
ment system. Depending on the volume of
data that has to be transferred, the process
may take several minutes. It may be necessa-
ry to confirm the data transmission on the
mobile phone.
The phonebook can also be viewed during a
telephone conversation.
If the name saved in the phonebook has an
assigned photo, it can be displayed on the list
next to the name. To do this, the option Show pictures for contacts in the Phone set
-
tings conte
xt must be enabl

ed and your mo-
bile phone must support this functionality
(check the compatibility list)