2019 Seat Ateca Owner's Manual

Operating modes
The unit

Infotainment System

Operating modes
Instructions for navigation When the Infotainment system is unable to re-
ceive any dat
a fr
om GPS satellites (due to a
dense tree canopy, underground car park),
navigation can still continue using the vehicle
sensors.
Possible limitations in navigation
In areas that are not or are only partially digi-
tised on the data storage device (e.g. insuffi-
cient definition of one-way streets and road
categories), the Infotainment system will still
attempt to provide route guidance.
Navigation area and updating navigation
data
Roads and streets are subject to constant
change (e.g. new roads, changes to street
names and building numbers). Therefore, if
the navigation data is not updated, then er-
rors or inaccuracies may occur during guid-
ance.
SEAT recommends updating navigation data
on a regular basis. Up to date navigation data
can be downloaded from www.seat.com or
acquired at a SEAT dealer. Updating and using navigation da-
ta fr
om an SD car

d  Only available for the model: Navi System
The Inf ot

ainment system always requires the
navigation data that is currently valid for this
unit in order to allow all functions to be used
in full. Using an old version may lead to errors
during navigation.
Updating navigation data
The current navigation data can be downloa-
ded in the internet at www.seat.com and stor-
ed in a SD card compatible with the unit.
Suitable SD Cards can be acquired at SEAT
dealerships.
The procedure is described on the internet at
www.seat.com.
Using navigation data

Infotainment System
in full. Using an old version may lead to errors
during navigation.
Updating navigation dat a
T o updat
e navigation data visit our website:
www.seat.com.
The navigation data must be installed after
downloading. Navigation is not possible from
the memory card.
Installing navigation data
The installation process takes about 2 hours.
If the Infotainment system is switched off, the
installation process is paused and will auto-
matically resume when switched back on.

Operating modes
Function button: function
B Messages and function buttons on the map
display

Infotainment System
Using the map

Operating modes
Route In the Navigation main menu, press the
Rout efunction button.
The
Route function button is only displayed
with rout e guidance activ

ated.Function button: function
Stop route guidance : Aborts current route guidance.
Enter destination : To enter a new destination or a new
stopo v

er

Infotainment System

To start guidance direct to the selec-
ted destination. Destinations that
come bef
or
e the selected destination
are ignored.
 To open the detailed view of the desti-
nation in question.
Available function buttons.
New dest. To add a new destination to the tour.
Destina-
tions To add a new destination from My
destinations to the tour

.
Storing To store the created tour in the tour
memory.
Start To start route guidance.
Calculate To update calculated distance and es-
timated arrival time

.a)
Stop To stop route guidance to the active
destination.b)
c To move a stopover or a destination to
another position on the list. Press and
drag t

o move the destination. a)
This function button is only displayed with route
guidance activ at
ed and when a destination has been
added t

o the tour.
b) This function button is only displayed with route
guidance activated.
L

ast destinations
View of destinations for which a route has al-
ready been started. My destinations