2019 Seat Arona wheel

Instruments and warning/control lamps
Changing memory (vehicles with digital
instrument clust er)
Whil e in Travel data ! General infor-
mation pr
ess  on the multi-function steer-
ing wheel t o s
wit ch betw
een the 3 memo-
ries 1)
:
The memory is del
eted if the
journey is interrupted for more than 2
hours.
Display and storage of
the journey data and the consumption
values collected. When refuelling, the
memory is deleted.
This memory contains travel data
up to a maximum of 19 hours and 59 mi-
nutes or 99 hours and 59 minutes, or up
to a maximum of 1999.9 km or
9999.9 km. When one of these values is
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is deleted.
Delete journey data presets

Instruments and warning/control lamps
In vehicles with multifunction steering wheel,
the multifunction displ ay can only be
oper ated with the st
eering wheel butt
ons.
Some menu options can only be read when
the vehicle is at a standstill. WARNING
Distracting the driver in any way can lead
to an accident and cause injuries.

Operation
Using the multifunction steering
wheel Fig. 127
Right side of multifunction steering
wheel : buttons t
o the menus and inf ormativ
e in-
dications on the instrument panel. As long as a priority 1

Operation
Operating the audio, telephone and navigation system with voice control Fig. 128
Controls on the steering wheel. Applies to vehicles with analogue instrument panel
Button
RadioMedia (except AUX) AUXTelephone* Navigation*
A Turn
Turn volume up/down. You do
not need to be in audio mode
(radio). Turn volume up/do
wn. You do
not need to be in audio mode
(media). Turn volume up/down. Y
ou do
not need to be in audio mode
(media). Turn volume up/down. Y
ou do
not need to be in telephone
mode. T
urn announcement volume
up/down. You do not need to
be in navigation mode but
ther e has t

o be an announce-
ment active when you adjust
the volume.
A Press
Mute volume.
Mute volume.Mute volume.Mute incoming call.Mute the current navigation
announcement.
B a)
Activate/deactivate voice control.
This function can be used from any mode (audio, media, navigation, assistants, v
ehicl

e status, travel data). When the system is in telephone mode this button

Instruments and warning/control lamps
Operating the audio, telephone and navigation system without voice control Fig. 129
Controls on the steering wheel. Button
RadioMedia (except AUX) AUXTelephone* Navigation*
A Turn
Turn volume up/down. You do
not need to be in audio mode
(radio). Turn volume up/do
wn. You do
not need to be in audio mode
(media). Turn volume up/down. Y
ou do
not need to be in audio mode
(media). Turn volume up/down. Y
ou do
not need to be in telephone
mode. T
urn announcement volume
up/down. You do not need to
be in navigation mode but
ther e has t

o be an announce-
ment active when you adjust
the volume.
A Press
Mute volume.
Mute volume.Mute volume.Mute incoming call.Mute the current navigation
announcement.
B a)

Start and driving
Electronic differential lock (EDS)* The EDL operates along with the ABS in vehi-
cles equipped with Electronic St
abilit
y Con-
trol (ESC)*.
EDL helps the vehicle to start moving, accel-
erate and climb a gradient in slippery condi-
tions where this may otherwise be difficult or
even impossible.
It uses the ABS sensors to monitor the speed
of the driven wheels.
At speeds of up to approximately 80 km/h
(50 mph), it is able to balance out differences
in the speed of the driven wheels of approxi-
mately 100 rpm/min caused by a partially
slippery road surface. It does this by braking
the wheel which has lost traction and distrib-
uting more driving force to the other driven
wheel via the differential.
To prevent the disc brake of the braking
wheel from overheating, the EDL cuts out au-
tomatically if subjected to excessive loads.
The vehicle will continue to function normally
without EDL. For this reason, the driver is not
informed that the EDL has been switched off.
The EDL will switch on again automatically
when the brake has cooled down. Control lamp
A malfunction in the EDL is indicated by the
ESC control lamp 

. Take the vehicle to a
specialised workshop as soon as possible. WARNING

Start and driving
Electronic torque management
(XDS)* When taking a curve, the driveshaft differen-
tial mechanism allows the outer wheel t
o t
urn
at a higher speed than the inner wheel. In this
way, the wheel that is turning faster (outer
wheel) receives less drive torque than the in-
ner wheel. This may mean that in certain sit-
uations the torque delivered to the inner
wheel is too high, causing the wheels to spin.
On the other hand, the outer wheel is receiv-
ing a lower drive torque than it could transmit.
This causes an overall loss of lateral grip on
the front axle, resulting in understeer or
“lengthening” of the trajectory.
The XDS system can detect and correct this
effect via the sensors and signals of the ESC.
Via the ESC, the XDS will brake the inside
wheel and counter the excess driving torque
of that wheel. This means that the driver

Driving
Engaging gears with the tiptronic
mode* Fig. 221
Centre console: changing gear with
tiptr onic Fig. 222
Steering wheel: automatic gearbox
l e v
ers The tiptronic gives the driver the option to
change gears manually. Changing gear manually with the selector
l
e
ver
It is possibl e t
o change to tiptronic mode,
both when the vehicle is stopped and while
driving.