2019 Seat Arona tow

Emergencies
No. Consumer/Amps
14 Steering Column LSS: wiper control 1015 Instrument panel 7.5
16 Right Lights Power Supply 40
17 Right Door Window Control 30
18 Windscreen wipers 30
19 Radio, Multimedia System 25
20 Heated Rear Window 30
21 SCR Control Unit 30
23 Rear View Camera 7.5
24 Connectivity Box, external audio
sour
ce wiring (Double USB-Aux IN),
tel ephone amplifier
, MIB display 5
25 Steering Column Electronics (MFL) 7.5
26 Gateway 7.5
27 Active Suspension Control Unit 7.5
28 DWA Sensor 7.5
29 DWA Horn 7.5
31 9AA/9AB climate control unit 7.5
9AK Climatronic control unit
15
32 Steering Column LSS, without Kessy 7.5
33 Left Door Window Control 30
35 Left Lights Power Supply 40 No. Consumer/Amps
36 Signal Horn 20
37 Heated seats control unit 30
38 BCM Power C63 30
39 BSD, PDC, MRR 10
40 Light switch, diagnosis input, head-
lamp range regul
at

or, LSS steering
column: lamps, halogen lamps,
switch, reverse gear, electrochromic
mirror, RKA without radio. 7.5
41 Regulation of unfolded exterior mir-
r
ors, 7.5
4 2 Clut
ch pedal
, ignition r

elays, AA
pressure sensor 7.5
43 DWP r

elay coil, rear window wiper
motor, heated nozzl
es 15
44 Airbag 7.5
45 Leimo Plus left headlight 7.5
46 Leimo Plus right headlight 7.5
48 Steering Column Lock, Kessy Con-
trol Unit 7.5
49 SCR Relay Coil 7.5
53

Automatic gearbox lever, ZSS 7.5
58 Double Water Pump 7.5
59 Heated rear view mirrors 10 No. Consumer/Amps
60 Tow Hook 30
61 Tow Hook 30 Fuse arrangement in engine com-
partment
Read the additional information carefully

Operation
Note
For anti-theft security, only the driver door
is fitted with a lock cylinder. “Safe” security system*
1)This is an anti-theft device which consists of a
double lock for the door l
ocks and a deacti-
v
ation function for the boot in order to prevent
forced entry.
Activation
The “safe” system is activated when the vehi-
cle is locked using the key or the remote con-
trol.
To activate it with the key, rotate once it is in-
serted in the door lock cylinder in the locking
direction.
To activate the system using the remote con-
trol, press the lock button once  on the re-
mote.
Once this system is activated, opening doors
from the outside and the inside is not possi-
ble. The rear lid can not be opened. The cen-
tral lock button does not work. When the ignition is switched off, the instru-
ment panel display indicates that the “Safe”
syst em is on.
Deactiv

ation
Rotate the key inserted in the lock cylinder
twice towards the locking direction.
To activate the system using the remote con-
trol, press the lock button  on the remote
twice in less than 5 seconds.
On deactivating the “Safe” system, the alarm
volumetric sensor is also deactivated.
With the “Safe” switched off, doors can be
opened from the interior but not from the ex-
terior.
See “Selective unlocking system*”
“Safe” status
On the driver door, there is warning lamp visi-
ble from outside the vehicle through the win-
dow which shows the “Safe” system status.
We will know that “Safe” system is activated
by the flashing warning lamp. The indicator
will flash on all vehicles, fitted and nor fitted
with an alarm, until they unlock.
Remember: Safe enabled with or without alarm: con-
tinuous flashing of warning lamp.
Saf
e disabled without alarm: the warning
lamp stays off.
Safe disabled with alarm: the warning lamp
stays off. WARNING
No one should remain inside the vehicle if
the “Safe” system is activat ed because
opening the doors will not be possibl

e in
the event of an emergency neither from the
inside nor the outside and help from the
outside is made difficult. Danger of death.
Passengers could become trapped inside
in case of emergency. Selective unlocking system*
This system allows to unlock either just the
driv
er door or all the v
ehicle
.
Driv

er door unlock button
Unlock once. Use either the key or the remote
control.
Once the key is inserted in the lock cylinder,
rotate once in the unlock direction. The driver
door will remain without “Safe” and unlocked. 1)
Available depending on market and version.
128

Driver assistance systems
When the ACC halts the vehicle (e.g. traffic
jam), the instrument panel displ ay sho
ws the
ACC ready to start message. If the v
ehi-
cl
e ahead drives off again, the ACC will also
do so automatically.
If the vehicle ahead does not drive off again,
the vehicle can be kept indefinitely in the ACC
ready to start status by operating the
third lever repeatedly towards position 2

Towing bracket device
Meaning of the orientation lines

Driving
Description Fig. 263
Towing bracket device support / de-
t achabl
e ball joint / k ey.Depending on the country or version, the
t
o wing br
acket de
vice

Towing bracket device
Step 1.

Towing bracket device
Checking proper attachment Fig. 270
Detachable ball properly attached. Whenever you go to use the detachable ball,
mak
e sur
e that it is pr operly att
ached first.
Det
achable ball properly attached.

Towing bracket device
Connectors
Y our v
ehicle is fitt
ed with a 13-pin connect
or
for the electrical connection between the
trailer and the vehicle.
If the trailer has a 7-pin plug you will need to
use an adapter cable. It is available at any
Technical Service.
Trailer weight/drawbar load
Never exceed the authorised trailer weight. If
you do not load the trailer up to the maximum
permitted trailer weight, you can then climb
correspondingly steeper slopes.
The maximum trailer weights listed are only
applicable for altitudes up to 1000 m above
sea level. With increasing altitude the engine
power and therefore the vehicle climbing
ability are impaired because of the reduced
air density. The maximum trailer weight has to
be reduced accordingly. The weight of the
vehicle and trailer combination must be re-
duced by 10% for every further 1000 m (or
part thereof). The gross combination weight
is the actual weight of the laden vehicle plus
the actual weight of the laden trailer. When
possible, operate the trailer with the maxi-
mum permitted drawbar load on the ball
joint of the towing bracket, but do not exceed
the specified limit.
The figures for trailer weights and drawbar
loads that are given on the data plate of the
towing bracket are for certification purposes only. The correct towing bracket figures for
your specific model, which may be lower
than these figures
, are given in the vehicle
documentation or on