2019 Seat Alhambra Owner's Manual

Driver assistance systems
The ACC function allows the driver to pro-
gr am a cruise speed and t
o sel
ect the dis-
tance required with regard to the vehicle in
front.
There are two versions of the system availa-
ble by default:

Driving

Driver assistance systems
Vehicle ahead detected. ACC is active
and is r egul
ating your speed.
Dist
ance level 2 set by the driver.
ACC is active and is regulating your dis-
tance based on speed. Note
When the ACC is connected, the indica-
tions on the instrument panel screen may be conceal ed by w

arnings from other func-
tions, such as an incoming call. Radar sensor
Fig. 263
On the front behind the SEAT badge:
r adar sensor
.On the front behind the SEAT badge, a radar
sensor has been inst
alled t

o capture the traf-
fic situation

Driving
Operating the Adaptive Cruise
Contr ol ACC Fig. 264
On the left of the steering column:
thir d le
ver for operating the Adaptive Cruise
Control. Fig. 265
On the left of the steering column:
thir d le

ver for operating the Adaptive Cruise
Control. When the Adaptive Cruise Control (ACC) is
connect
ed, the gr
een contr

ol lamp

Driver assistance systems
ACC on the instrument panel display will
s wit
ch t
o Active mode

Driving

Driver assistance systems
In order for the ACC to start regulating ac-
tiv ely again, the driv
er must st
art driving
again faster than 2 km/h for a few seconds.
Below 2 km/h, the ACC stops the vehicle
again.
The ACC turns off in the following cases:

Driving
Factors that may affect how the radar
sensor oper at
es
If l
aser sensor operation is impaired, due to
heavy rain, spray, snow or mud, the ACC is
deactivated temporarily. The relevant text
message will appear in the dash panel dis-
play. If necessary clean the SEAT
badge