2019 Peugeot Rifter seats

59
Rear seats (row 2)
Folding the backrests
First steps:
F l ower the head restraints,
F

i
f necessary, move the front seats for ward,
F

c
heck that nothing or no person might
inter fere with the folding of the backrests
(clothing, luggage, etc.),
F

c
heck that the outer seat belts are lying flat
on the backrests.
The folding of the backrest is
accompanied by a
slight lowering of the
corresponding seat cushion.
When the backrest is released, the red
indicator is visible in the release grips on
the outer seats.
Folding from the passenger
compartment
Outer seat (left-hand or right-hand)
F

T
urn backrest release grip 1 .
Repositioning the backrests
First check that the outer seat belts are
lying vertically flat alongside the backrest
latching rings.
F

P
ut the backrest in the upright position and
push it firmly to latch it home.
F

C
heck that the red indicator in the release
grip 1 is no longer visible.
F

E
nsure that the outer seat belts are not
trapped during the manoeuvre.
F

T
urn backrest release grip 1
.
F

G
uide the backrest down to the horizontal
position.
F
G
uide the backrest down to the horizontal
position.
3
Ease of use and comfort

60
Central seatF
P
ull backrest release tab 1 .
F

G
uide the backrest down to the horizontal
position.Folding from the boot
Outer seat (left-hand or right-hand)
Central seat
F

P
ull the backrest release lever 2 or
3
towards you.
The backrest folds fully onto the cushion.
Repositioning the backrests
Outer seat (left-hand or right-hand)
First check that the outer seat belts are
lying vertically flat alongside the backrest
latching rings.
F

P
ut the backrest in the upright position and
push it firmly to latch it home.
F

C
heck that the red indicator on the release
grips 1
of the outer seats is no longer
visible.
F

E
nsure that the outer seat belts are not
trapped during the manoeuvre.
Check that the backrest of the upright
central seat is correctly aligned with the
backrests of the outer seats.
Central seat
F

P
ut the backrest in the upright position and
push it firmly to latch it home.
F

C
heck that the central seat belt is not
trapped during the manoeuvre.
With the central seat, only the strap must
be used.
Ease of use and comfort

61
Rear seats (row 3)
Access to row 3Longitudinal adjustment
Long
F

Ra

ise the control and slide the seat
forwards or backwards.
Placing the backrest in the table position
F

L

ower the head restraint as far as it will go.
Repositioning the backrest
F U nlock it by pulling control 1 .
F

R
eturn it to its initial position
F

C
heck that the assembly is anchored properly.
F Operate control 1 to fold the backrest onto
the seat cushion.
Table position
F Using the row 2 seat grip, fold the backrest.
F T o reposition it, tilt the backrest backwards
until it locks into place.
Fully folded position
Long
Placing the seat in the fully folded position
F

F

old the backrest to the table position.
Label in row 3
While driving, it is prohibited to have
a passenger seated next to a seat in the fully
folded position.
3
Ease of use and comfort

64
Rear box
It can be accessed from the rear seats and
from the vehicle's boot.
Its capacity is 60 litres, and the maximum
authorised load is 10
kg.
Open the rear box carefully to prevent any
objects stored inside from falling out.
Light ambience
The light ambience can be
configured from the vehicle's
configuration menu.
Blind
Opening/Closing
F
P
ress and hold the button; the blind opens/
closes and stops when you release the
button.
If the blind meets an obstacle during
operation, you must reverse its movement.
To do this, press the switch concerned.
When pressing the button to open/close
the blind, the driver must ensure that
nothing and no one might inter fere with its
movement.
The driver must ensure that passengers
use the blind correctly.
Be particularly aware of children when
operating the blind.
F

F

rom the rear seats, slide the boot shutters
to open it.
F

F

rom the vehicle's boot, place your thumb
on the boot recess then pull the handle to
open it.
12 V socket(s)
(Depending on version.)
F

T
o connect a 12 V accessory (maximum
power: 120
watts), lift the cover and plug in
the correct adapter.
Do not exceed the maximum power rating
of the socket (other wise there is a
risk of
damaging your portable device).
The connection of an electrical device
not approved by PEUGEOT, such as
a
USB charger, may adversely affect the
operation of vehicle electrical systems,
causing faults such as poor radio
reception or inter ference with displays in
the screens.
Ease of use and comfort

68
High load retaining net
Hooked onto the upper fixings and the lower
rings or lugs, this allows the use of the entire
loading volume up to the roof:
-
B
ehind the rear seats (row 2).
-

B
ehind the front seats (row 1) when the rear
seats are folded.
When positioning the net, check that the
strap loops are visible from the boot; this
will make slackening or tightening them
easier.
Installation behind row 1
F Open the covers of the upper fixings 1 .
F U nroll the high load retaining net.
F

P
osition one of the ends of the net's metal
bar in the corresponding upper fixing 1 , then
do the same with the other end.
F

F
ully extend the straps.
F

Wind each strap around bar 3 located under
t he front seat cushion (row 1), then secure each
spring hook to the corresponding strap ring.
Installation behind row 2
F Fold or remove the luggage cover.
F O pen the covers of the upper fixings 2 .
F

U
nroll the high load retaining net.
F

P
osition one of the ends of the net's metal
bar in the corresponding upper fixing 2 , then
do the same with the other end.
F

A
ttach the hook of each of the net's straps
in the corresponding stowing ring 4 (located
on the floor).
F

T
ighten the straps.
F

C
heck that the net is attached securely and
properly extended.
F

F
old down the rear seats.
F
T
ighten the straps without raising the bench
seat.
F
C
heck that the net is attached securely and
properly extended.
Ease of use and comfort

69
2-position luggage cover
parcel shelf (removable)
Standard
Standard
It can be installed in two different positions:
high and low.
It consists of two sections which can be folded
back on each other. Never use the ISOFIX ring which is for
fixing the strap of a
child seat with Top
Tether.
The maximum authorised weight on the
luggage cover parcel shelf is 25 kg.
F

T
o fold it from the boot, take hold of it then
fold it back on itself up to the rear seats. From the low position, you can store it by
sliding it towards the backrests of the rear
seats.
F
T
o unfold it from the boot, take hold of it
then unfold it up to the boot pillars.
Luggage cover roller
When sharp deceleration occurs, objects
placed on the luggage cover may turn into
projectiles. Long
Long
In 5 -seat configuration, it is installed behind
the second row seats, with the third row seats
stored folded away.
In 7-seat configuration, it is stored behind the
third row seats.
Installation
F Position the left and right ends of the roller in the cut-outs A .
F

P
ull out the roller until it reaches the boot
pillars.
F

I
nsert the guides of the roller into the rails in
pillars B .
F

D
epending on version, you can access
the boot by opening the rear screen in the
tailgate and attaching the guides of the
roller into the rails of pillars C .
3
Ease of use and comfort

100
Operating fault
If a fault occurs with the system,
t his warning lamp comes on,
accompanied by the display of
a
message in the instrument panel.
Have it checked by a
PEUGEOT dealer or
a


qualified workshop.
Seat belts
Front seat belts
The front seat belts are fitted with a single
p yrotechnic pretensioning system (or double
on the driver's side, depending on equipment)
and force limiters (or progressive force
limiters on the driver's side, depending on
equipment).
This system improves safety in the front seats
in the event of a
front or side impact.
Depending on the severity of the impact, the
single pyrotechnic pretensioning system
instantly tightens the seat belts against the
body of the occupants.
The double pyrotechnic pretensioning system
operates in identical fashion, except that it
combines two anchoring points instead of one,
thereby reinforcing its efficiency.
The pretensioning seat belts are active when
the ignition is on.
Fastening
F Pull the strap then insert the tongue in the buckle.
F

C
heck that the seat belt is fastened
correctly by pulling the strap.
Unfastening
F Press the red button on the buckle.
F G uide the seat belt as it reels in.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant, thus
improving their protection.
The progressive force limiter operates
in identical fashion, except that it takes
into account the build of the driver, thereby
optimising the reduction of the pressure of the
seat belt against the chest, following an impact.
Rear seat belts (row 2)
Outer seats
Depending on equipment, they may be fitted
with a
single pretensioning system and force
limiters.
Be sure to put the correct seat belt in the
correct buckle.
Do not interchange the belts or buckles for the
outer seats with the belt or buckle for the centre
seat.
Centre seat
The seat belt does not have a pyrotechnic
p retensioning system and force limiters.
Safety

101
Installation
Removal and storage
F Press the red button on buckle B, then on
buckle A .
F

G
uide the strap as it reels in and take
tongue B , then A to the magnet at the
anchoring point on the roof. Before performing any operations on
the rear seats, to avoid damage to the
seat belts, check that the outer belts are
properly tensioned and fix the tongues to
their anchoring points. The centre seat
belt must be completely reeled in.
Rear seat belts (row 3)
F Pull the strap and insert tongue A into the
right-hand buckle.
F

In
sert tongue B into the left-hand buckle.
F

C
heck that each buckle is fastened correctly
by pulling the strap.
They do not have a
pyrotechnic pretensioning
system and force limiters.
Seat belt warning lamps
1. Front left seat belt warning lamp (or
depending on country, driver's warning
lamp).
2. Front right seat belt warning lamp (or
depending on country, driver's warning
lamp).
3. Rear right seat belt warning lamp (row 2).
4. Rear centre seat belt warning lamp (row 2).
5. Rear left seat belt warning lamp (row 2).
From approximately 12
mph (20 km/h),
the warning lamp(s) flashes for 2


minutes
accompanied by an audible signal. Once
these 2
minutes have elapsed, the warning
lamp(s) remains on until the driver or the front
passenger and/or the rear passenger(s) fasten
their seat belt.
5
Safety