2019 Peugeot Partner navigation

[x] Cancel search: navigation

Page 267 of 312

Peugeot Partner 2019  Owners Manual 7
Global voice commands
These commands can be made from any 
screen page after pressing the " Voice 
commands" button located on the steering 
wheel, as long as there is no telephone 
call in progress

Page 268 of 312

Peugeot Partner 2019  Owners Manual 8
Voice commandsHelp messages
Navigate home To plan a route, say "navigate to" followed by the address, the contact name or an intersection. For 
example, "navigate to address 11 Regent Street, London

Page 273 of 312

Peugeot Partner 2019  Owners Manual 13
Select "My destinations ".
Select the " Recent" tab.
Select the address chosen in the list to display 
the " Guidance criteria ".
Press " OK" to start navigation.
Select " Position " to visualise t

Page 274 of 312

Peugeot Partner 2019  Owners Manual 14
Select "My destinations ".
Select the " Contact" tab.
Select a contact in the list to start navigation.
To points of interest (POI)
Points of Interest (POI) are listed in different 
categories. Pre

Page 275 of 312

Peugeot Partner 2019  Owners Manual 15
AndPress this button to enter the value 
for "Longitude " using the virtual 
keypad.
TMC (Traffic Message 
Channel)
TMC (Traffic Message Channel) 
messages are linked to a European 
standard on the

Page 276 of 312

Peugeot Partner 2019  Owners Manual 16
Select a Wi-Fi network found by the 
system and connect.
Wi-Fi connection
This function is only available if it has been 
activated either via the "Notifications" or 
via the "Applications" menu. P

Page 277 of 312

Peugeot Partner 2019  Owners Manual 17
Select "Map".
Activate or deactivate:
-
  "Allow declaration of danger 
zones ".
-
  "Guidance to final destination 
on foot "
-
  "Display recommended 
speed "
These settings must be made 
accordi

Page 278 of 312

Peugeot Partner 2019  Owners Manual 18
"Danger zones" pack 
updates
Press Settings to display the 
primary page.
Press the " OPTIONS" button to go to the 
secondary page.
Select "System settings ".
Select the " System info " tab.
Select
Page:   < prev 1-8 9-16 17-24 next >