2019 Peugeot 208 window

43
Manual air conditioning
1.Temperature adjustment.
2. Air flow adjustment.
3. Air distribution adjustment.
4. Recirculation of interior air.
5. Air conditioning on/off.
Dual-zone automatic air
conditioning
Temperature
F Turn the knob 1 from blue (cold) to red (hot)
to adjust the temperature.
Air flow
F Turn the knob 2 from position "1" to position
" 6 " to obtain the desired air flow for your
comfort.
If you place the air flow control at position
" 0
"(off), the temperature in the vehicle
will no longer be maintained. A slight flow
of air can still be felt, resulting from the
for ward movement of the vehicle.
Air distribution
You can vary the air distribution in the
passenger compartment using the knob 3 .
Windscreen and side windows.
Windscreen, side windows and
footwells.
Footwells.
Central and side vents.
The air distribution can be
modulated by placing the knob at an
intermediate position.
Air conditioning
With the engine running, the air conditioning is
designed to operate effectively in all seasons,
with the windows closed.
It allows you:
-

i
n summer, to lower the temperature,
-

t
o increase the effectiveness of the
demisting in winter, above 3°C.
On/Off
F Press button 5 to activate/deactivate the air
conditioning system. To cool the air more quickly, you can use
interior air recirculation for a
few moments by
pressing button 4 . Then return to the intake of
exterior air.
The air conditioning does not operate
when the air flow adjustment control 2 is in
position " 0".
Switching the system off may result in
some discomfort (humidity, misting).
1. Temperature adjustment for left/right side.
2. Air flow adjustment.
3. Air distribution adjustment.
4. Recirculation of interior air.
5. Air conditioning on/off.
6. Automatic comfort programme.
7. Automatic visibility programme.
3
Ease of use and comfort

44
AUTO mode
F Press the "AUTO" button 6 su c c e s s i ve l y.
The active mode appears in the display screen,
as described below: Provides soft and quiet operation by
limiting air flow.
Offers the best compromise between
a
comfortable temperature and quiet
operation.
Provides dynamic and effective air
f low.
When the engine is cold, the air flow will
only reach its optimum level gradually
to prevent too much cold air being
distributed.
In cold weather, it favours the distribution
of warm air to the windscreen, the side
windows and the footwells only.
Manual mode
If you wish, you can make a different choice
f rom that offered by the system by changing
a
setting. The other functions will still be
automatically managed.
When you modify a
setting, the indicator lamp
in the button 6
goes off. F

P
ress the button 6 again to return to the
automatic comfort programme.
Visibility programme
For information on how to use the visibility
programme 7 , refer to the corresponding
section in " Front demisting – defrosting ".
Temperature
The driver and front passenger can each set
the temperature individually.
The value shown on the display is a
level
of comfort, not a
temperature in Celsius or
Fahrenheit.
F

P
ush the button 1 down (blue) to reduce the
value or up (red) to increase it.
A setting of around 21
provides optimum
comfort. Depending on your requirements, a
setting between 18
and 24 is normal.
It is also recommended to avoid a
left /right
setting difference of more than 3.
For maximum cooling or heating of the
passenger compartment, it is possible
to exceed the minimum value 14
or the
maximum value 28.
F

P
ush the button 1 down until "LO" is
displayed or up until " HI" is displayed. On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value setting, there is no
need to alter the value displayed in order
to reach the required level of comfort. The
system compensates automatically and
corrects the temperature difference as
quickly as possible.Air conditioning
With the engine running, the air conditioning is
designed to operate effectively in all seasons,
with the windows closed.
It allows you:
-

i
n summer, to lower the temperature,
-

t
o increase the effectiveness of the
demisting in winter, above 3°C.
On/Off
F Press button 5 to activate/deactivate the air
conditioning system.
To cool the air more quickly, you can use
interior air recirculation for a
few moments by
pressing button 4 . Then return to the intake of
exterior air.
The air conditioning does not operate
when the air flow adjustment control 2
is in
position " 0".
Ease of use and comfort

45
Switching the system off may result in
some discomfort (humidity, misting).
Air distribution
F Press button 3 successively to direct the air
flow towards:
-

t
he windscreen, the side windows and the
footwells,
-

t
he windscreen and side windows
(demisting or defrosting),
-

t
he central and side vents,
-

t
he central vents, the side vents and the
footwells,
-

t
he footwells.
Air flow
F Press button 2 "Full fan " to increase the air
f low.
The air flow symbol (a fan) appears in the
screen. It is filled in progressively in relation to
the value required.
F

P
ress button 2 "Empty fan " to reduce the
air f low.
Deactivating the system
F Press button 2 "Empty fan " for the air flow
until the fan symbol disappears and "- - -"
appears. This action deactivates all functions of the air
conditioning system.
Temperature is no longer regulated. A slight air
flow can still be felt however, resulting from the
for ward movement of the vehicle.
Avoid driving for too long with the system
switched off – risk of misting and of
deterioration of the air quality.
Pressing button 2 "
Full fan " reactivates the
system with the values in use at the time it was
switched off.
Recirculation of interior air
The intake of exterior air prevents the formation
of mist on the windscreen and the side
windows.
Recirculation of the interior air isolates the
passenger compartment from exterior odours
and fumes.
This allows hot or cold air to be delivered
quickly when required.
F

P
ress button 4 to recirculate the interior air/
to permit the intake of outside air.
When the interior air recirculation is active, the
symbol appears or the indicator lamp comes on
(depending on version). Avoid prolonged use of the recirculation of
interior air – Risk of formation of mist and
deterioration of the air quality!
Front demisting – defrosting
With heating
F Put the controls for air
flow 2 , temperature 1
and
air distribution 3
in the
appropriately marked position.
With manual air conditioning
F Put the controls for air flow 2 ,
temperature 1 and air distribution
3
in the appropriately marked
position.
F

F

or air conditioning, press button 5 ; its
indicator lamp comes on.
3
Ease of use and comfort

46
Courtesy lamp
Rear screen demisting –
defrosting
On/Off
F Press this button to switch on/switch off
the defrosting of the rear screen and door
mirrors (if fitted to your vehicle).
Switch off the defrosting of the rear
screen and door mirrors as soon
as appropriate, as lower current
consumption results in reduced fuel
consumption.
With automatic dual-zone
air conditioning
Auto – Visibility programme
Switching on
F Press button 7 to demist or defrost the
windscreen and side windows as quickly as
possible.
The system automatically manages the air
conditioning, air flow and air intake, and
provides optimum distribution towards the
windscreen and side windows.
Switching off
F Press button 7 or button 6 again; the
indicator lamp in button 7 goes off, and the
indicator lamp in button 6
comes on.
The system starts again with the values in use
at the time it was switched off.
With Stop & Start, when demisting/
defrosting has been activated, STOP
mode is not available. The rear screen demisting/defrosting
can only operate when the engine is
running.1.
Courtesy lamp
2. Map reading lamps
In this position, the lighting comes
on gradually:
-

w
hen the vehicle is unlocked,
-

w
hen the key is removed from the ignition,
-
w

hen opening a

door,
-
w

hen unlocking remotely.
Ease of use and comfort

66
Lateral airbags
System which protects the driver and front
passenger in the event of a serious side impact
in order to limit the risk of injury to the chest,
between the hip and the shoulder.
Each lateral airbag is fitted in the seat backrest
frame, door side.
Deployment
It is deployed on one side in the event of
a serious side impact applied to all or part
of the side impact zone B , perpendicular
to the longitudinal centreline of the vehicle
on a
horizontal plane and directed from the
outside towards the inside of the vehicle.
The lateral airbag inflates between the hip and
shoulder of the front occupant of the vehicle
and the corresponding door trim panel.
Curtain airbags
System contributing towards greater protection
for the driver and passengers (with the
exception of the rear centre passenger) in the
event of a
serious side impact in order to limit
the risk of injury to the side of the head.
Each curtain airbag is built into the pillars and
the upper passenger compartment area.
Deployment
The curtain airbag is deployed at the same
time as the corresponding lateral airbag in the
event of a
serious side impact applied to all or
part of the side impact zone B , perpendicular
to the longitudinal centreline of the vehicle
on a
horizontal plane and directed from the
outside towards the inside of the vehicle.
The curtain airbag inflates between the front or
rear occupant of the vehicle and the windows.
Operating fault
If this warning lamp in the instrument
panel comes on, you must contact
a
PEUGEOT dealer or a qualified
workshop to have the system
checked. The airbags might no
longer deploy in a


crash. In the event of a
minor impact or bump on
the side of the vehicle or if the vehicle rolls
over, the airbag may not be deployed.
In the event of a rear or front collision, the
airbag is not deployed.
Safety

78
Advice
The incorrect installation of a child seat in
a vehicle compromises the protection of
the child in the event of an accident.
Ensure that there is no seat belt or seat
belt buckle under the child seat, as this
could destabilise it.
Remember to fasten the seat belts or
the child seat harness keeping the slack
relative to the child's body to a
minimum,
even for short journeys.
When installing a


child seat using the seat
belt, ensure that the seat belt is tightened
correctly on the child seat and that it
secures the child seat firmly on the seat
of your vehicle. If your passenger seat is
adjustable, move it forwards if necessary.
The head restraint must be removed
before installing a
child seat with
a
backrest on a passenger seat.
Ensure that the head restraint is stored or
attached securely to prevent it from being
thrown around the vehicle in the event
of sharp braking. Refit the head restraint
when the child seat is removed. Children at the rear
At rear seating positions, always leave
sufficient space between the front seat
and:
-

a "
rear ward facing" child seat,
-

t
he child's feet for a child seat fitted
"forward facing".
To do this, move the front seat for wards
and, if necessary, straighten its backrest.
For optimal installation of the "forward
facing" child seat, verify that its backrest is
as close as possible to the backrest of the
vehicle seat, if possible in contact with it.
Children at the front
The legislation on carrying children on the
front passenger seat is specific to each
country. Refer to the legislation in force in
the country in which you are driving.
Deactivate the front passenger airbag
when a "rear ward facing" child seat is
installed on the front passenger seat.
Other wise, there is a
risk of serious or
fatal injury to the child if the airbag is
deployed. Installing a


booster seat
The chest part of the seat belt must be
positioned on the child's shoulder without
touching the neck.
Ensure that the lap part of the seat belt
passes correctly over the child's thighs.
We recommend using a
booster seat with
a
backrest, equipped with a belt guide at
shoulder level.
Additional protections
To prevent accidental opening of the doors
and rear windows, use the child lock.
Take care not to open the rear windows by
more than one third.
To protect young children from the rays
of the sun, fit side blinds on the rear
windows.
As a
safety precaution, do not leave:
-

a c
hild or children alone and
unattended in a
vehicle,
-

a c
hild or an animal in a vehicle
which is exposed to the sun, with the
windows closed,
-

t
he keys within reach of children inside
the vehicle.
Safety

79
Child lock
Manual child lock
Mechanical system to prevent opening of a rear
d oor using its interior control.
The control is located on the edge of each rear
d o o r.
Locking
F Using the ignition key, turn the red control as far as it will go:
-

t
o the left on the left-hand rear door,
-

t
o the right on the right-hand rear door.
Unlocking
F Using the ignition key, turn the red control as far as it will go:
-

t
o the right on the left-hand rear door,
-

t
o the left on the right-hand rear door.
Electric child lock
Electric system for locking the rear doors so
that they cannot be opened using their interior
controls.
Activation
F With the ignition on, press this button.
The red indicator lamp in the button comes on,
accompanied by a message confirming the
activation.
This red indicator lamp remains on for as long
as the child lock is activated.
Opening the doors from the outside and
operation of the electric rear windows from the
driver's controls remain possible.
Deactivation
F With the ignition on, press this button again.
The indicator lamp in the button goes off,
accompanied by a
message to confirm
deactivation.
This indicator lamp remains off while the child
lock is switched off. Any other state of the indicator lamp
indicates a

f
ault with the electric child lock.
Have it checked by a PEUGEOT dealer or
a

qualified workshop.
This system is independent and in no
circumstances does it take the place of
the central locking control.
Check the status of the child lock each
time you switch on the ignition.
Always remove the key from the ignition
when leaving the vehicle, even for a short
time.
5
Safety

136
Fuse N°Rating Functions
F01 40
AHeated rear screen.
F02 10


AHeated door mirrors.
F03 30
AFront one-touch
windows.
F05 30
ARear one-touch
windows.
F06 10


AFolding door mirrors.
F07 10


AFolding door mirrors.
F09 15


AHeated front seats.
F10 20
AHi-Fi amplifier.Engine compartment
The fusebox is placed in the engine
compartment near the battery.
Access to the fuses
F Unclip the cover.
F
C hange the fuse.
F

A
fter the operation, close the cover very
carefully to ensure correct sealing of the
fusebox.
Right-hand side
In the event of a breakdown