2019 MERCEDES-BENZ S CLASS high beam

Exterior lighting
Information about lighting systems andyourresponsibility
Thevarious lighting systems ofthevehicle areonly aids. The driver ofthevehicle isresponsiblefor correctvehicle illumination in accordancewiththe prevailing light and visibility conditions,legalrequirements and traffic situation.
Light switch
Operating the light switch
GcLeftstanding light
HdRightstanding light
I`Parking lights and license plate lamp
JXAutomatic driving lights (preferred lightswitch position)
KXLow beam/high beam
6^Switchestherearfog lights on or off
When low beam is activated,the`indicatorlampforthe parking lights is deactivated andreplacedbytheXlow beam indicator lamp.
#Always parkyourvehicle safely and in awell-lit area, in accordance withtherelevant legalstipulations.
*NOTEBattery dischargingbyoperatingthestanding lights
Operatingthestanding lightsover a period ofhours puts astrain onthe battery.
#Where possible, switch ontherightdor leftcparking light.
Inthe case of severebattery discharging,thestanding lights or parking lights are automati‐cally switched offtofacilitatethe next enginestart.
Theexterior lighting (exceptstanding and park‐ing lights) switches off automatically whenthedriver's door is opened.
Light and visibility14 5

RObservethe notes on surround lighting(→page149).
Automatic driving lights functionThe parking lights, low beam and daytimerun‐ning lamps are switched on automaticallydepending onthe ignitionstatus andthe ambi‐ent light.
&WARNINGRisk of accident whenthe lowbeam is switched off in poor visibility
Whenthe light switch is settoX,the lowbeam may not be switched on automaticallyifthere isfog, snow orother causes of poorvisibility such as spray.
#In such cases, turnthe light switchtoX.
The automatic driving lights are only an aid.Yo uareresponsibleforvehicle lighting.
Switchingtherearfog lights on or off
Requirements:RThe light switch is intheXorXposi‐tion.
#Pressthe^button.
Please observethe country-specific lawsontheuse ofrearfog lamps.
Operatingthe combination switchfor thelights
1High-beam headlamps
2Turnsignal indicator,right
3High-beamflasher
4Turnsignal light, left
#Usethe combination switchtoactivatethedesired function.
14 6Light and visibility

High-beam headlamps
#Toswitch on:turnthe light switchtotheXorXposition.
#Pressthe combination switch beyondthepoint ofresistance inthe direction of arrow1.Whenthe high beam is activated,theXindicator lampfor low beam will be deactiva‐ted andreplacedbytheWindicator lampfor high beam.#Toswitch off:movethe combination switchbacktoitsstarting position.
High-beam flasher
#Pullthe combination switch inthe directionof arrow3.
Turnsignal lights
#Toindicate briefly:pressthe combinationswitch brieflytothe point ofresistance inthedirection of arrow2or4.The corresponding turn signal indicator willflashthree times.
#Toindicate permanently:pressthe combi‐nation switch beyondthe point ofresistanceinthe direction of arrow2or4.
Vehicles withActive Lane Change Assist
RIndicator operation activatedbythe drivercanextendforthe duration ofthe lanechange.
RIfthe driver has indicated immediatelybeforehand but a lanechange isthen notpossible,the turn signal indicator mayactivate automatically.
Activating/deactivating the hazardwarninglights
#Press button1.
Light and visibility147

Cornering light
Cornering light function
The cornering light improvesthe illumination oftheroadwayover a wide angle inthe turningdirection, enabling better visibility on tightbends,forexample. It can be activated onlywhenthe low beam is switched on.
The function is active:
RAtspeeds below 25mph (40 km/h) whenthe turn signal light is switched on orthesteering wheel is turned
RAtspeeds between 25mph (40 km/h) and45mph (70 km/h) whenthesteering wheelis turned
Traffic circle and intersection function:thecornering light is activated on bothsidesthroughanevaluation ofthe current GPS position ofthevehicle. Itremains active until afterthevehiclehas leftthe traffic circle orthe intersection.
Adaptive Highbeam Assist
Adaptive Highbeam Assist function
&WARNINGRisk of accident despiteAdaptive Highbeam Assist
Adaptive Highbeam Assist does notrecog‐nizethefollowingroad users:
RRoad users without lights, e.g. pedes‐trians
RRoad users with poor lighting, e.g.cyclists
RRoad users whose lighting is obstructed,e.g.bya barrier
Onveryrareoccasions,Adaptive HighbeamAssist mayfailtorecognizeotherroad userswiththeirown lighting, or mayrecognizethemtoo late.
Inthese or similar situations,the automatichigh beam is not deactivated or is activateddespitethe presence ofotherroad users.
#Always observethe traffic carefully andswitch offthe high beam in good time.
Adaptive Highbeam Assist cannottakeintoaccountroad,weather or traffic conditions.
Detection may berestricted inthefollowingcases:
Rin poor visibility,e.g.fog, heavyrain or snow
Rifthere is dirt onthe sensors orthe sensorsare obscured
Adaptive Highbeam Assist is onlyan aid.You areresponsiblefor adjustingthevehicle's lightingtothe prevailing light, visibility and traffic condi‐tions.
14 8Light and visibility

TheAdaptive Highbeam Assist automaticallyswitches betweenthefollowing types of light:
RLow-beam headlamps
RHigh-beam headlamps
Atspeeds above19mph (30 km/h):
RIf nootherroad users are detected,the highbeam is switched on automatically.
The high beam switches off automatically:
RAtspeeds below16mph (25 km/h).
RIfotherroad users are detected.
RIfstreetlighting is sufficient.
Atspeeds aboveapproximately31mph(50 km/h):
RThe headlamprange ofthe low beam isregu‐lated automatically based onthe distancetootherroad users.
The system's optical sensor is located behindthe windshield neartheoverhead control panel.
SwitchingAdaptive Highbeam Assist on/off#Toswitch on:turnthe light switchtotheXposition.
#Switch onthe high beam usingthe combina‐tion switch.Whenthe high beam is switched on automat‐ically inthe dark,the

Display inthe assistancegraphic
1Spotlight function switched on but not oper‐ating
2Spotlight function switched on and operating
The pedestrian symbol inthe assistance graphicindicatesthestatus ofthe spotlight function. Ifthe pedestrian symbol is displayed dark1,thefunction is switched on. Ifthe symbol is dis‐
played bright2,the conditionsforthe Spotlightfunction are also fulfilled.
System limitationsThe spotlight function does notflash at animals.
The spotlight function is not active or is activeonlytoa limitedextent if:
RYou are driving in city traffic.
RThe pedestrians are located inthe area of anoncomingvehicle or avehicle in front.
Activating/deactivating the spotlight func‐tion
Requirements:RPedestrian detection is active (→page241).
RTheroadwayis not lit.
RThe speed is at least37mph (60 km/h).
RAdaptive Highbeam Assist Plus is switchedon.
If alltherequirements are fulfilled,the headlampflashesfour shortpulses at a pedestrian detec‐ted on or neartotheroadway.
Multimedia system:
,Vehicle.÷.Light Set-
tings.Spotlight
#Activatesor deactivateSthe function.
Blind Spot Assist andActive Blind SpotAssistwithexitwarning
Function of Blind Spot Assist andActiveBlind Spot AssistwithexitwarningBlind Spot Assist andActive Blind Spot Assistuse two lateral,rear-facingradar sensorstomonitorthe area upto130ft(40 m) behindyourvehicle and10ft(3 m) directly nexttoyourvehi‐cle.
If avehicle is detected at speeds above approx‐imately 8mph (12 km/h) andthisvehicle subse‐quentlyentersthe monitoringrange directly nextto yourvehicle,thewarning lamp inthe outsidemirror lights upred.
If avehicle is detected closetothe side ofyourvehicle,theredwarning lamp inthe outside mir‐rorflashes. Ifyou switchonthe turn signal indi‐cator inthe corresponding direction, awarning
Driving and parking243

Display messagesPossible causes/consequences andPPSolutions
Adaptive Highbeam AssistInoperative
*Adaptive Highbeam Assist is malfunctioning.
#Visit aqualified specialistworkshop.
Adaptive Highbeam AssistCurrently Unavailable SeeOperator's Manual
*Adaptive Highbeam Assist istemporarily unavailable.
The system limits havebeenreached (→page148).
#Drive on.Oncethe cause ofthe problem is no longer present,the system will beavailable again. TheAdaptive HighbeamAssist Now Availabledisplay message appears.
Adaptive Highbeam AssistCamera View RestrictedSee Operator's Manual
*The camera view isrestricted.Possible causes are:
RDirt onthe windshield inthe camera'sfield of vision
RHeavyrain, snow orfog
Driving systems and driving safety systems may be malfunctioning ortemporarily unavailable.
Oncethe cause ofthe problem is no longer present, driving systems and driving safety systems will beavailableagain.
Ifthe display message does not disappear:
#Pullover andstopthevehicle safely as soon as possible, paying attentiontoroad and traffic conditions.
#Cleanthe windshield.
522Display messages andwarning/indicator lamps

Warning and indicator lamps
Overview ofwarning and indicator lamps
Some systems will performa self-test whentheignition is switched on. Somewarning and indi‐cator lamps may brieflylight up orflash. Thisbehavior is non-critical. Thesewarning and indi‐cator lamps indicate a malfunction only iftheylight up orflash afterthe engine has beenstar‐ted or during a journey.
Instrument Display
Progressive setting
Ifyou selectthe progressive display setting,thepositions ofthe indicator lamps onthe instru‐ment display willchange.
Warning and indicator lamps:XLow beam(→page145)
`Parking lights (→page145)
WHigh beam(→page146)
>=Turnsignal lights(→page146)
^Rearfog light(→page145)
uRestraint system(→page 524)