Page 463 of 578

*NOTEVehicle damage fromthe jack
Ifyou do not positionthe jack correctly atthe appropriate jack support point ofthevehicle,the jack could tipover withthevehi‐cleraised.
#The jack is designedexclusivelyforjacking upthevehicle atthe jack sup‐port points.
#Taketheratchet wrench out ofthe tire-changetool kit and place it onthe hexagonnut ofthe jack sothatthe letters "AUF" arevisible.
#Position jack2at jack support point1.
#Turnratchet wrench3clockwise until jack2sits completelyon jack support point1andthe base ofthe jack liesevenly ontheground.
#Continuetoturnratchet wrench3untilthetire israised a maximum of1.2 in (3 cm) offthe ground.
#Loosen andremovethe wheel (→page 461).
Removing a wheel
Requirements:RThevehicle israised (→page 459).
Mercedes-AMGvehicles:observethe notes inthe Supplement. Otherwise,you may notrecog‐nize dangers.
Whenchanging a wheel,avoid applying anyforcetothe brake discs, sincethis could impairthelevel of comfortwhen braking.
*NOTEDamagetothreading from dirt onwheel bolts
#Do not place wheel bolts in sand or ona dirty surface.
#Unscrewthe uppermost wheel bolt com‐pletely.
Wheelsand tires461
Page 464 of 578

#Screwalignment bolt1instead ofthewheel bolt intothethreading.
#Unscrewtheremaining wheel bolts fully.
#Removethe wheel.
#Installthe new wheel (→page 462).
Mounting a new wheel
Requirements:RThe wheel isremoved (→page 461).
Mercedes-AMGvehicles:observethe notes inthe Supplement. Otherwise,you may notrecog‐nize dangers.
&WARNINGRisk of accident from losing awheel
Oiled, greased or damaged wheel bolt/wheelnutthreads or wheel hub/wheel mountingboltthreads can causethe wheel bolts/wheel nutstocome loose.
As aresult,you could lose a wheel while driv‐ing.
#Never oil or greasethethreads.
#Intheevent of damagetothethreads,contact aqualified specialistworkshopimmediately.
#Havethe damaged wheel bolts or dam‐aged hubthreadsreplaced.
#Do not continue driving.
#Observethe information onthechoice oftires (→page 454).
For tires with a specified direction ofrotation, anarrowonthe sidewall ofthe tire indicatesthecorrect direction ofrotation. Observethe direc‐tion ofrotation when installing.
#Slidethe wheeltobe mounted ontothealignment bolt and push it on.
&WARNINGRisk of injuryfrom tighteningwheel bolts and nuts
Ifyou tightenthe wheel bolts or wheel nutswhenthevehicle israised,the jack could tip.
#Only tighten wheel bolts or wheel nutswhenthevehicle is onthe ground.
#Be suretoobservethe instructions andsafety notes on "Changing a wheel"(→page 454).
#For safetyreasons, onlyuse wheel boltswhich havebeen approvedbyMercedes-Benz andforthe wheel inquestion.
*NOTEDamagetopaintwork ofthe wheelrim when screwing onthefirst wheel bolt
Ifthe wheel hastoo much play when screw‐ing inthefirst wheel bolt,the wheelrim paintcan be damaged.
462Wheels and tires
Page 465 of 578

#Pressthe wheelfirmlyagainstthewheel hub when screwing onthefirstwheel bolt.
#Tightenthe wheel boltsevenly in a diagonalpattern inthe order indicated untiltheyarefinger-tight.
#Unscrewthe alignment bolt.
#Tightenthe last wheel bolt until it isfinger-tight.
#Lowerthevehicle (→page 463).
Loweringthevehicle after a wheelchange
Requirements:RThe new wheel has been installed(→page 462).
#Placetheratchet ontothe hexagon nut ofthejack sothatthe letters "AB" are visible.
#Tolower thevehicle:turntheratchet ofthejack counter-clockwise.
#Tightenthe wheel boltsevenly in a diagonalpattern inthe order indicated (1to5).Specified tighteningtorque:111lb-ft(150 Nm).
&WARNINGRisk of injurythrough incor‐rect tighteningtorque
The wheelscould come loose ifthe wheelbolts or wheel nuts are not tightenedtotheprescribed tighteningtorque.
#Makesurethe wheel bolts or wheelnuts are tightenedtothe prescribedtighteningtorque.
#Ifyou are not sure, do not movethevehicle. Consult aqualified specialistworkshop and havethe tighteningtor‐quechecked immediately.
#Checkthe tire pressure ofthe newly moun‐ted wheel and adjust accordingly.
#Vehicles with a tire pressure monitoringsystem:Restartthe tire pressure monitoringsystem (→page441).
Makesuretoobservethefollowing furtherrela‐ted subject:
RNotes on tire pressure (→page 435)
Wheels and tires463
Page 477 of 578
Refrigerantfilling capacity andPAG oil
Sedans,vehicleswith a long wheel‐base
Refrigerant
All models23.3 ± 0.4 oz(660 ±10g)
Mercedes‑MaybachRefrigerant
All models27.2 ± 0.4 oz(770 ±10g)
Sedans,vehicleswith a long wheel‐base
PAG oil
All models3.9 ± 0.4 oz(110±10g)
Mercedes‑MaybachPAGoil
All models4.2 ± 0.4 oz(120 ±10g)
Vehicle data
Vehicle dimensions
The heights specified mayvaryas aresult of:
RTires
RLoad
RCondition ofthe suspension
ROptional equipment
Height when opened
Sedan11Heightwhenopened
S 450 4MATIC71.0 in(1803 mm)
S 560 4MATIC71.1in(1806 mm)
Long wheelbasevehicles11Heightwhenopened
S 450 4MATIC
S 450
70.9 in(1803 mm)
Allother models71.1in(1806 mm)
Mercedes‑Maybach11Heightwhenopened
All models71.1in(1806 mm)
Technical data475
Page 499 of 578