2019 MERCEDES-BENZ S CLASS esp

High-beam headlamps
#Toswitch on:turnthe light switchtotheXorXposition.
#Pressthe combination switch beyondthepoint ofresistance inthe direction of arrow1.Whenthe high beam is activated,theXindicator lampfor low beam will be deactiva‐ted andreplacedbytheWindicator lampfor high beam.#Toswitch off:movethe combination switchbacktoitsstarting position.
High-beam flasher
#Pullthe combination switch inthe directionof arrow3.
Turnsignal lights
#Toindicate briefly:pressthe combinationswitch brieflytothe point ofresistance inthedirection of arrow2or4.The corresponding turn signal indicator willflashthree times.
#Toindicate permanently:pressthe combi‐nation switch beyondthe point ofresistanceinthe direction of arrow2or4.
Vehicles withActive Lane Change Assist
RIndicator operation activatedbythe drivercanextendforthe duration ofthe lanechange.
RIfthe driver has indicated immediatelybeforehand but a lanechange isthen notpossible,the turn signal indicator mayactivate automatically.
Activating/deactivating the hazardwarninglights
#Press button1.
Light and visibility147

Cornering light
Cornering light function
The cornering light improvesthe illumination oftheroadwayover a wide angle inthe turningdirection, enabling better visibility on tightbends,forexample. It can be activated onlywhenthe low beam is switched on.
The function is active:
RAtspeeds below 25mph (40 km/h) whenthe turn signal light is switched on orthesteering wheel is turned
RAtspeeds between 25mph (40 km/h) and45mph (70 km/h) whenthesteering wheelis turned
Traffic circle and intersection function:thecornering light is activated on bothsidesthroughanevaluation ofthe current GPS position ofthevehicle. Itremains active until afterthevehiclehas leftthe traffic circle orthe intersection.
Adaptive Highbeam Assist
Adaptive Highbeam Assist function
&WARNINGRisk of accident despiteAdaptive Highbeam Assist
Adaptive Highbeam Assist does notrecog‐nizethefollowingroad users:
RRoad users without lights, e.g. pedes‐trians
RRoad users with poor lighting, e.g.cyclists
RRoad users whose lighting is obstructed,e.g.bya barrier
Onveryrareoccasions,Adaptive HighbeamAssist mayfailtorecognizeotherroad userswiththeirown lighting, or mayrecognizethemtoo late.
Inthese or similar situations,the automatichigh beam is not deactivated or is activateddespitethe presence ofotherroad users.
#Always observethe traffic carefully andswitch offthe high beam in good time.
Adaptive Highbeam Assist cannottakeintoaccountroad,weather or traffic conditions.
Detection may berestricted inthefollowingcases:
Rin poor visibility,e.g.fog, heavyrain or snow
Rifthere is dirt onthe sensors orthe sensorsare obscured
Adaptive Highbeam Assist is onlyan aid.You areresponsiblefor adjustingthevehicle's lightingtothe prevailing light, visibility and traffic condi‐tions.
14 8Light and visibility

vehicle is unlocked. Whenyoustartthevehicle,the surround lighting is deactivated andtheautomatic driving lights are activated.
Interior lighting
Adjusting the interior lighting
Frontoverhead control panel
#1=Switchesthe front left-handreadinglamp on/off
#23Switchesthe automatic interiorlighting control on/off
#3JSwitchesthe front interior lightingon/off
#4BSwitchestherear interior heatingon/off
#5=Switchesthe frontright-handread‐ing lamp on/off
Control panel insidethegrab handle (rearpassenger compartment)
You can switchthereading and make-up lampson or offfor one side or bothsides ofthevehi‐cle.
#Press button1untilthereading lampand/orthe make-up lamp switch on or off ontherespective side ofthevehicle.#Press button2untilthereading lamp andthe make-up lamp switch on or off on bothsides ofthevehicle.
Adjusting the ambient lighting
Multimedia system:
,Vehicle.÷Light Settings.Ambi-
ent Light
Settingthe color
#SelectColor.
#Set a color.
Adjusting the brightness
#SelectBrightness.
#Set a brightnessvalue.
Activating the brightnessfor zones
#SelectBrightness Zones.
15 0Light and visibility

&WARNINGRisk of accident duetomis‐judgment of distances when usingthepassenger mirror
The outside mirror onthe front-passengersidereflects objects on a smaller scale. Theobjects in view are infact closerthantheyappear.
As aresult,you may misjudgethe distancebetweenyou andtheroad user drivingbehindyou,forexample, whenchanginglanes.
#Therefore, always lookoveryour shoul‐der in ordertoensurethatyou areaware ofthe actual distance betweenyou andtheroad users driving behindyou.
Foldingthe outside mirrorsin/out
#Brieflypress switch1.
Resettingthe outside mirrors
%Ifthe battery has been disconnected or com‐pletely discharged,the outside mirrorsmustbereset. Onlythen willthe automatic mirrorfolding functionworkproperly.
#Brieflypress switch1.
Adjusting the outside mirrors
#Selecttherequired mirror using button3or4.
#Use button2tosetthe position ofthe mir‐roryou haveselected.
Engagingthe outside mirrors
#Press and hold button1.You will hear a click andthe mirror will audi‐bly engage in position. The mirror is set inthe correct position.
Automatic anti-glare mirrorsfunction
&WARNINGRisk of burns and poisoningduetothe anti-glare mirror electrolyte
Electrolyte may escape iftheglass in anautomatic anti-glare mirror breaks.
The electrolyte is harmful and causes irrita‐tion. It mustnot come into contact withyourskin,eyes,respiratory organs or clothing orbe swallowed.
Light and visibility15 5

Overview of climate control systems
Notes on climate control
An interior airfilter must always be used sothatthe air conditioning system, pollution level moni‐toring andthe airfiltering functionworkcor‐rectly. Makesurethatthefilter is installed cor‐rectly andthefilter housing inthe engine com‐partment is closed correctly usingthe cap andalways tightly sealed when in operation. Usefil‐tersrecommended and approvedbyMercedes-Benz. Always haveserviceworkcarried out at aqualified specialistworkshop.
Overview ofthe control panelfor automaticclimate control
Plug-inhybrid:observethe notes inthe Supple‐ment. Otherwise,you mayfailtorecognize dan‐gers.
The indicator lamps inthe buttons indicatethatthe corresponding function is activated.
1XSets climate controltoautomatic, left(→page160)
2

Topreservethe engine duringthefirst1000 miles (1500 km):
Rdrive atvaryingroad speeds and enginespeeds.
Rdrivethevehicle in drive programAor;.
Rchangegear beforethetachometer needle is

The inner segment lights up green andthe outersegmentfills up:
R1Moderate acceleration
R2Gentle deceleration androlling
R3Consistent speed
The inner segment is grayandthe outer seg‐ment empties:
R1Sporty acceleration
R2Heavy braking
R3Fluctuations in speed
You havedriven economically when:
Rthethree outer segments are completelyfil‐led simultaneously
Rthe ECO display border lights up
The additionalrange achieved as aresult ofyourdrivingstyle in comparison with a driver with averysporty drivingstyle is shown underBonusfr. Start. Therange displayed does not indicate afixedreduction in consumption.
DYNAMIC SELECT switch
Function oftheDYNAMIC SELECT switch
Plug-inhybrid:observethe notes inthe Supple‐ment. Otherwise,you mayfailtorecognize dan‐gers.
Mercedes-AMGvehicles:observethe notes inthe Supplement. Otherwise,you mayfailtorec‐ognize dangers.
UsetheDYNAMIC SELECT switchtochangebetweenthefollowing drive programs:
R=(Individual):individual settings
RC(Sport):sporty drivingstyle
RA(Comfort):comfortable and economi‐cal drivingstyle
RVehicles with MAGICBODYCONTROL:N(CURVE):comfortable driving withcurveinclination function
R;(Eco):particularly economical drivingstyle
Depending onthe drive program selected,thefollowingvehiclecharacteristics willchange:
RDrive system:
-Engine and transmission management
-Active Distance AssistDISTRONIC
RESP®
RSuspension
RSteering
Driving and parking175

Selectingthe drive program
#PressDYNAMIC SELECT switch1forwardsor backwards.The drive program selected appears inthemultifunction display.
Configuring drive program I
Multimedia system:
,Vehicle.eDYNAMIC
SELECT.Individual
#Selectthe individual setting.
Switchingthe operationfeedbackfor driveprogram on/off
Multimedia system:
,Vehicle.eDYNAMIC SELECT
#SwitchNotification for Useronsor offS.Whenthis function is active, a correspondingmessage is shown inthe media display whena drive program is selected withtheDYNAMIC SELECT switch.
Displayingvehicle data
Multimedia system:
,Vehicle.eDYNAMIC SELECT
#SelectVehicle Data.Thevehicle data is displayed.
Displaying engine data
Multimedia system:
,Vehicle.eDYNAMIC SELECT
#SelectEngine Data.
%Thevaluesfor engine output and enginetor‐que may deviate fromthe nominalvalues.
Itemsthat can influencethis are,forexam‐ple:
RSea level
RFuel grade
ROutsidetemperature
176Driving and parking